Latest ms plate Tenders | Government ms plate Tenders

Central Government/Public Sector

CTN :40969871

15 Jul, 2025 NA

Bangalore - Karnataka

Tender For annual rate contract for supply of conductor rods and ms plates

Central Government/Public Sector

CTN :40091162

15 Jul, 2025 1.30 Crore

Ganjam - Odisha

Tender For corrigendum : supply of design, manufacturing, supply of dg set of 500 kva rating for site conditions as per annexure 1 , supply of emergency switch board as per annexure - 2 , supply of lighting distribution board and power distribution board as per annexure - 3. , supply and installation of led lights , supply of structural steel - ms equal angles, isa 50 x 6mm , ms plate-3.15 mm of either tata steel, jindal steel, rinl, sail make only. supply of gi pipes etc , charges towards installation and commissioning of dg set as per the scope of work attached. , supply and installation of auto changeover switch as per the scope of work attached herewith. , fabrication of structural steel along with painting the structures as per scope of work , shifting of cables from central stores and laying of cables over cable trays and binding the cables on the cable trays with cable tie as per scope of work , shifting of amf panels, esb,ldb and pdb panels and its accessories as per the scope of work

corporations/Associations/Others

CTN :39946354

10 Jul, 2025 2.14 Crore

Ahmedabad - Gujarat

Tender For bid to ras tender for supply of clutch disc dia 380 (for clutch- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs vi/obd-ii bs-vi) , clutch cover 380 dia.bs2/3/4/6(for tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , kit pressure spring 330 dia(for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , 14 inch clutch assy.with valeo f510 facing(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , clutch repair kit major - four finger. consist of 7 items b1301504 s/a of ret. spring-4 , f0932015 pin eccentric-4 f2461311 cl. plate lever-4 , f2630114 pressure pad-4 , f3646910 cl. spring-12 f0530115 bush for lever-4 , f3531111 bolt spl-4 , b1301504 s/a of ret. spring-4 , f2630114 pressure pad-4 f0932015 pin eccentric-4 , f2461311 cl. plate lever-4 f0530115 bush for lever-4 f3531111 bolt spl-4 (for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , clutch repair kit - minor consists of total-40 pin- 4 , bush- 4 , bracket for lever- 8 , spacer -12 , standard screw - hex - m10 x 1.5 cp x 25mm long x gr 8.8 -12(for clutch ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , spring kit-4 fingers con of 2 items(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , release lever service kit (for clutch 380 dia- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , release lever with eye bolt kit(for clutch hold down bolt 380 dia- tata , 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , hold down bolt kit (for clutch 380 dia- tata1618/62 bs-iv) , clutch release lever kit (full) 330 dia (for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , clutch collector ring(for clutch 380 dia- tata , 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , pressure spring kit(for clutch pressure spring kit.380 dia- tata , 1618/62 bs-iv & 1618/57 1618/62 bs-vi/obd-ii bs-vi) , clutch release bearing(for clutch- tata 1618/62 bs-iv) , clutch release fork (ratio-2)(for gear box- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , 352 dia. assy. clutch disc (organic)(for clutch disc- tata 1515/55 bs-iv) , 352 dia. assy. clutch cover(for clutch 1515/55 bs-iv) , pr. plate with needle roller bearing (for clutch- tata 1515/55 bs-iv) , release lever kit (full) 352 dia organic (for tata , 1515/55 bs-iv) , release lever with eye bolt-352 dia organic (for clutch tata , 1515/55 bs-iv) , pressure spring kit 352 dia organic(for clutch- tata , 1515/55 bs-iv) , collector ring- 352 dia organic(for clutch- tata , 1515/55 bs-iv) , clutch release yoke (for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , 330 dia clutch disc(for clutch- tata , mini ultra 7.5t bs-iii & bs-iv) , 14 inch rdc clutch cover s/a(four fin. pressure assy)(for clutch- ley 4/185 , 4/169 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , 330 dia diaphragm clutch cover assembly (clutch cover assy. for ley mini ls1508.7t6r bs vi) , 330 dia organic clutch disc assembly with 1.25 inch spline to suit 400nm to 450nm engine torque. (clutch disc for ley mini ls1508.7t6r bs vi) , face plate four finger.(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , cover -clutch 380 diaphragm cover assembly(for clutch ley. vk2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , disc - clutch 380 dia organic(for ley. vk2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , release bearing - clutch control 1 (for ley mini ls1508.7t6r bs vi ) , clutch bush pin kit - 4 finger con. of 2 items f0530115 bush for lever-4 , f0932015 pin eccentric-4 (for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , locking clip clutch release bearing (for leyland vk 2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , spring clutch release(for clutch- eicher pro 3008 mini bus bs-iv) , cover assy. clutch(for clutch cover assy.- eicher 3008 mini bus bs-iii & bs-iv) , clutch disc assy. 330 dia(for clutch- eicher pro 3008 mini bus bs-iv) , clutch cov

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Multi City - Multi State

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

CTN :40716066

10 Jul, 2025 NA

Dimapur - Nagaland

Tender For corrigendum : supply of rubik permanent defence - hdpe laminated sand bag of size 75x40 cm, sand colourand each bag having weight not less than 60 gms , shs 6mm thick size 120 x 120mm x 2.4m long for column withholes made on the top of coln as per design for fixing g1beam. make, tata oblique sail oblique jindal , ismb 150 rsj150 x 75 mm g1 1.85 mtr long for beam conforming torelevant is, make, tata oblique sail oblique jindal , ismb150 rsj 150 x 75 mm g1 60 cm mtr long for beamconforming to relevant is, make, tata oblique sail obliquejindal , ismb 125 rsj 125 x 70mm g2 3.0m long for beam 2conforming to relevant is, make, tata oblique sail obliquejindal , shs 6 mm thick size 70x70mm x 1.85m long for g3bottom bracing with conforming to relevant is make tataoblique sail oblique jindal , 6mm thick ms plate 75x150mmwelded with g1 beam connected with nut and bolts. , 6mmthick ms plate 100mm x 100mm with a gap of 75mmwelded with coln bottom to connect 70mm x70mm shs withnut and bolts, 04 each. , 12mm dia nut bolt 75mm longinserted in 12mm dia eight nos hole in each column. , 6mmthick ms base plate of size 150 x150 mm for shs columnincluding welding, knotching, cutting and nuts,bolts, washeretc. , steel roofing trough srt of size 1630 mm x 613 mmx 180 mm made out of 2 mm thick hot rolled carbon steelsheet conforming to relevant is complete. , ms hexagonalnuts. bolts and washers 12 mm dia 40 mm long. , ldpesheet 3 m wide weighing 1 kg oblique rm black in colourand shall contain not less than 2 percenttage of carbonblack, sample to be approved before supply. , red oxideprimer conforming to relevant is. , synthetic enamel paintcolour green ist quality conforming to relevant is, make,johnson and nicholson india ltd, nerolac paint and asianpaint. , thinner, sample to be approved before supply. , drydistemper, sample to be approved before supply. , chalkwhiting, sample to be approved before supply. , paint brush4 inch make, amar oblique lucky sample to be approvedbefore supply. , pre fabricated steel door of size 0.90m x1.80m made out of 2mm thick ms black carbon sheetwelded to 30x30x6mm isa door shutter frame fitted to50x50x6mm isa door frame. , supply of swivel bullet proofglass glass 750mm x 500mm size 72 mm thick withfabricated iron frame including necessary lockingarrangement in the frame to fix the glass in the loop hole. ,silicone gel sealent of 01 pack of 400 gms includingaplicator gun. , ply wood 10 mm thick as per requirementfor flat surface. , foundation bolts of 16 mm dia and 250 mlong with nut, bolts washer etc.

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40974719

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of grease nipple(fig-i) , nut for adjusting bolt(fig -j) , locking wire(fig-i) , cheese head bolt with nut(strong diseel rr fig-i) , pin for clutch link(fig-i) , sealinf ring for 14 & 19 , pin for clutch link(fig-i) , cheese head bolt(fig-i) , set screw(fig-i) , bolt for key washer(fig-d) , driving pin(strong diesel rr fig-i) , key (rr strong fig-f) , oil seal , fulcrum pin for ball lever(fig-i) , key for steering(p-11) , pin for clutch casing(fig-i) , key (rr strong fig-f) , spnr tubular box 14x17mm , eye ball(fig-i) , oil seal(plate-h) , clutch link(fig-i) , key for coupling(p-11) , clamping plate(fig-i) , pin for coupling(p-11) , start push button(p-32) , locking bolt(p-11) , lock nut with locking(strong p-26) , lock nut with locking(strong p-26) , oil seal(strong diesel road roller f-i) , end plate lh(strong p-23) , washer & slotted nut(strong p-26) , stud(strong p-25) , filter element , fuel stop cock(p-32) , ignition switch(p-32) , release lever , key washer(fig-d) , lock nut with locking(strong p-26) , clutch ball lever(fig-i) , break trunion nut(strong p-28) , distance piece(fig-h) , distance water(fig-h) , pin for axle cap(p-13) , falcrum pin with nut pin (p-28) , light switch(p-32) , outer clamping plate(fig-i) , bearing , shim set(strong p-26) , thrust washer(p-13) , inner clamping plate(fig-i) , shim set(strong p-23) , oil pressure gauge (p-32) , bush(strong p-26) , link for foot brake lever(p-28) , head light 12 v (ms sl no-87) , pipe fuel oil leak off assy , roller bearing(fig-i) , clutch facing ring(strong diesel rr fig-i) , water temp gauge(p-32) , bearing(fig-h) , bearing , foot brake pedal(p-28) , forward clutch plate center(fig-i) , brake lining set(fig -j) , nozzle fuel injection , element air filter , hours meter (p-32) , shim set(strong p-21) , guide plate(fig -j) , bushing , forward clutch plate (fig-i) , side clutch operator(fig-i) , bearing , starting pulley (p-36) , rubber hose (ms sl no-100) , trust bearing(fig-i) , roller bearing , bearing(strong p-26) , bearing(strong p-26) , cover for bearing housing(strong p-26) , bush(p-23) , bush(p-23) , coupling block(p-11) , universal coupling(p-11) , bearing housing back(strong p-26) , bearing , clutch pressure ring(fig-i) , bearing(p-25) , break strap with lug(fig-j) , split universal coupling (p-11) , bearing , adjusting set lh(strong p-23) , clutch casing sleeve(fig-i) , 1st inter shaft pinion(28t)(fig-h) , fd pinionrh(14t)(plate h) , steering wheel(p-11) , radiator assy , bearing(fig-h) , bearing housing for ist inner shaft(strong p-21) , steering pinion(fig-d) , bevel gear -rh(fig-h) , 1st inter shaft & pinion(14t)(fig-h) , housing cover for ist inter shaft(strong p-21) , warm wheel(fig-d) , f.d pinion lh(14t)(plate-h) , clutch driver(fig-i) , clutch shaft(strong p-26) , spiral bevel wheel(strong p-21) , matched point set(comprising-rhh2 , rio58 & rio62) , bevel gear(strong p-23) , steering worm(p-11) , spiral bevel pinion fwd(strong p-26) , spiral bevel pinion reverse(strong p-26) , starter motor locas type 25m 114 , integrated gear (30 oblique 477) comprising with 03 items , cylinder head assy(minor) (including 11 items)

CTN :40978101

18 Jul, 2025 NA

Multi City - Multi State

Tender For supply of replacement injectors , diesel filter , water seperator , wire socket , clutch plate and pressure plate , release bearing , fly wheel facing , radiator overhauling , mechanical labour charges for removal of gear box assembly, replacement of clutch plate, pressure plate, release bearing and refiting of gear box assembl , cylinder head gasket , replacement of no 6 piston , replacement of main bearing and connecting bearing , replacement of piston ring , replacement of shaft thrust washer , anabond big , replacement of sleeve, reboring of sleeves, shaft lapping and lathe work , mechanical labour charges for engine work - removal of sump, stripping of engine assembly, replacement of piston, sleeve, sylinder head gasket, injectors and refitting of assembled engine assy , clutch plate , pressure plate , clutch cable assembly , mechnical labour charges for removal of gear box assembly, replacement of clutch plate, pressure plate, release bearing and refitting of gear box assembly , repair of self starter by replacing carbon brushes, holders, solenoid switch with labour charges , ignition switch , repair of self starter by rewinding the armature, field coils, replacement of carbon brushes, holders, solenoid switch with labour charges , repair of self starter by rewinding the armature, field coils, replacement of carbon brushes, holders, solenoid switch, bendix drive with labour charges , repair of self starter by replacing the armature, field coils, switch, brush holder, bendex, bush set with labour charges , repair of self starter by replacing the armature, field coils, brush holder, bendex, bush set with labour charges , repair of self starter by replacing the brush holder, bendex , brush set with labour charges , removal of steering gear box, striping, overhauling with necessary spares and refitting , steering coloumn flange , flange welding and lathe work , clutch booster , brake booster assembly , mechnical labour charges for removal of old items and fitment of new spare parts

Central Government/Public Sector

CTN :40968125

18 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of set of modified ms plate

Central Government/Public Sector

CTN :40781245

18 Jul, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of set of modified ms plate for rail guard as per drg no. sr.dee/rs/ed/mech-118, set consists o f 03 items 1. ms plate of thickness 5mm - 1 no. 2. ms plate of thickness8mm - 1 no 3. ms plate of thickness 10mm - 1 no. is 2062 [ warranty period: 30 months after the date of delivery ]

Ms Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector