Latest ms plug Tenders | Government ms plug Tenders

CTN :41488805

28 Aug, 2025 NA

Kamrup - Assam

Tender For supply of replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6582013 * /dated: 18-08-2025 & & / bid document 1 / 13

State Government

CTN :41495257

25 Aug, 2025 1.13 Crore

Noida - Uttar Pradesh

Tender For maintenance of drain (repair of internal drain, provide & fixing of sfrc cover and m.s. jaal in sector-34) noida

Corporations And Associations And Others

CTN :41506936

26 Aug, 2025 1.38 Lacs

Panchkula - Haryana

Tender For repair of di water supply pipe and pf of ms cover on hodi and other various points near shopping complex infront of suncity and disposal site in sec 20 panchkula

State Government

CTN :41283092

26 Aug, 2025 38.88 Lacs

Ukai - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4980 g works for removal and application of insulation and ms cover plate gi sheet al sheet or corrugated sheet at various elevation and location of boiler unit nos..

CTN :41390711

19 Aug, 2025 NA

Jalandhar - Punjab

Tender For supply of pvc kitchen cabinet made of 18 mm wpc board desnity 500 duly fabricated , wc one piece all in one single seat , automatic senser pillar cock 15 mm , dr fixit damp guard , wash hand basin china ware 22 inch x 16 inch comp , multi polyplus 01 mtr w x 20 mtr length x 0.80 mm 2 mm thick roll having a center core consists of 90 micron hmhdpe film with polymeric water proofing membrane , hydraulic door closer cast iron non porous body single speed regulating valve 70 degree fast speed 20 degree slow speed door size upto 1200 mm max door weight upto 80 kgs , sliding door bolt aluminium 300mm , pvc pipe single socket in 3 rm length with rubber ring 75 mm dia , bitumen primer paint for use in water primer pack of 5 ltr tin , permanent cold patch material packed in 25 kg poly bag suitable for pot holes repair of bitumen surfaces , gi pipe 20 mm dia , toughen glass 3 feet x 4 feet x 5 mm thick , lid for pvc water storage tank 500 ltr , helical door spring size 150 mm door size upto 1000 mm door weight upto 75 kgs , m seal of 1 kg packing , looking mirror 48inch x 15inch x 5mm for table dressing ladies , sliding door bolt 200mm ms , window glass pane plain 0.43 m x 0.34 m , window glass pane plain 0.44 m x 0.85 m , window glass pane plain 0.52 m x 0.52 m , gi tank nipple 20 mm x 100 mm , window glass pane plain 0.39 m x 0.56 m , window glass pane plain 0.44 m x 0.51 m , aluminium door stoper 63mm , bow handle aluminium 150mm , window glass pane plain 0.54 m x 0.37 m , bow handle symet 150mm , window glass pane plain 0.37 m x 0.46 m , bow handle aluminium 125mm , window glass pane plain 0.40 m x 0.55 m , pvc bend 110 mm dia , gi pipe 15 mm dia , cp tumbler holder , gi elbow 15 mm , oil putty ready made , synthetic resin adhesive fevicol , aluminium door stoper 50mm , handle for mortice lock cp , bow handle aluminium symet 75mm , gi union 15 mm , gi socket 15 mm , gi tee 15 mm , door handle ms 100mm ovel type , pvc hinges for fixing lid cover , cp urinal spreader 15mm , pvc socket 110 mm dia , pvc tee 110 mm dia //bid details 2 / 43

Central Government/Public Sector

CTN :41407028

30 Aug, 2025 49.00 Lacs

Mumbai - Maharashtra

Tender For 8219 repair/ maint to certain b/r marine assets incl replacement of pcc and ms cover, ss railing, chain, at cg dock and k and l berth and associate areas at nd mumbai under age b/r-i under ge (nw) kunjali

CTN :41426302

25 Aug, 2025 NA

Delhi - Delhi

Tender For tender for supply of vehicle repair tata yodha - cluth cylinder assy kit , air filter set , fuel water separtor , element kit oil filter , brake lining , split pin , pilot bearing ms , ring synchroniser , counter shaft cluster gear , water pump tata for tata yodha , liquid gasket , universal joint , oil seal , release bearing assy , ball bearing , oil pressure switch for tata yodda , tie rod drag link right and left , castrol steering oil premium plus , tata genuine coolant , engine oil premium plus , m and l for testing for replacement of side mirror with frame 01 job , m and l for wheel balancing and alignment checking adjustment of wheel bearing including refitting wheels inluding weight charges complete each job 01 , m and l for replacement of fornt and back complete set of seat cover superior quality as approved by mto 01 job , repair to fuel system cleaning servicing and calibration of fip system 01 job , greasing and cleaning to be carried out after completion of all above mentioned work and testing to seen the veh satisfactorily condition

CTN :41242650

11 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of valve 20mm , dol starter 2 hp , dol starter 5 hp , rubber water hose 25 mm , ci tail socketed 150mm , rubber gasket 150 mm dia pipe , graphite of size 15mm , graphite 12mm , ci collar split 100 mm , nuts bolts , rubber coupling tc 15 , rubber gasket 100 mm pipe dia , nut and bolts with washer off size , nuts and bolts , rubber gasket 3 mm thick , ms plug 40mm , ms plug 50mm , ms plug 25mm , sheet glass 3 point 5 mm , pvc pipe swr , ss brakect with end cap , glass sheet 5 point 5 mm , pvc tank cover 500 ltr , pvc door seal 900 mm , glass corner , cp jet sprey , glass shelf for whb , ms bracket for whb , cp grating 125 mm , gi wire mesh , alu door stoper 125 mm , ms butt hinges 100 mm , ss wire sloth 0 point 36 mm , plywood bwp , pvc connection pipe 750 mm , aluminium butt hinges 100 mm , pvc corrugated urinal pipe , gun matel gate valve 20 mm , frosted glass pane 3 mm , ptmt graring 100 mm , pvc grating 150 mm , cp grating 150 mm , nails of different size , hasp and stapals , m seal 100 , pvc long bend 32 mm , cp urinal spreader , ss wire cloth 0 point 36 mm widhtof aperture 1 point 40 mm , ss but hinges 125 mm , ss hasp and staples 150 mm , pinao hinge continiousms bright finish or electrogalvanised 40mm flap , teflon tape 12 mm width 15 mtr , dhaga for plumbers thread cotton , drapery rod 28 mm dia ms powwer coted , mils steel screw full theaded 35 mm 100 nos , ms plug 15 mm , pvc garting 125 mm , ms plug 20 mm , ms butt hinges 75 mm midium , mild steel screw full threaded 50 mm , paint brush 4 inch , ss funel suitable for 25 mm curtain rod , spindle half cut for mixer , ss 6 pin bathroom cloth hanger , geyser bolt , pvc rawal plug , chinese black screw size 50 mm long , chinese black screw size 35 mm long , chinese black screw size 30 mm long , nails woodn window glass , chinese nails size 30 mm long , chinese nails , chinese nails size 38 mm long , chinese nails size 3 inch long , 12 mm thickness designer partical board , 5 mm thick 5 nos of ply commrical plywood , plywood commrical , curtain rod 3 mtr long ss , plywood commerical , partical board , 300 mm long helical door spring rat rod pattern lock for almirah large med two holes, lock for almirah med large 4 holes, handle lock for almirah, handle for almirah large med, ppcp handle for chair visitors steel set of two, "top for table office clk steel of size 1200 x 610 mm with standard prelaminated particle board 18 mm thick of teak shed with balancing white lamination on other side 4 mm thick beading of teak wood shall be provide all around top ", "top for teapoy varandah of size 750 x 450mm made out of prelaminated particle board 18 mm thick of teak shed with balancing white lamination on other side 4 mm thick beading of teak wood shall be provide all around top ", steel furniture lock for drawer/lockers with dulicate key 6 lever, "top for table dining 6 pers of size 1500 x 900 mm made out of pre laminated particle board 18 mm thickness of teak shed with bal white lamination on other size 4 mm thick beading of teak wood shall be provide all around the top ", foam cushion 32 density size 555 x 530 x 100mm duly covered with tapestry cloth of super quality, plywood one side teak commercial 8' x 4', 6 mm thick, plywood commercial exterior grade of size 2440 x 1220 x 12 mm thickness with one side teak face, top for table peg of size 450 x 300 mm made out of prelaminated particle board 18 mm thickness of teak shed with balancing white laminations //bid details 2 / 137

CTN :40827182

11 Aug, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of swr pipe type a length 06 feet 75 mm dia , chrorium plated overhead shower 150mm dia and 15mm bore square , ply wood 8 feet x4 feet x 08 mm bwr grade isi mark , plate rack s s size 24 inch x24 inch x10 inch , s s kitchen sink of size 20 inch x 17 inch x8 inch , s s kitchen sink with drain board of size 41 inch x20 inch x8 inch grade 304 isi mark , stainless steel grating round 4 inch with hole , stainless steel grating round 4 inch without hole , ptmt grating round 125 mm with hole , ptmt grating round 125 mm , ptmt jet spray with 1.00 mtr tube , ply wood 8 feet x4 feet x 04 mm teak face isi mark , tower bolt s s 100 mm grade 304 , cp brass botel trap 32 mm , cp brass waste coupling 40 mm , plate rack s s size 36 inch x31 inch x10 inch , tower bolt s s 150 mm grade 304 , ptmt push cock 15 mm , ptmt push cock 20 mm , tower bolt alumn 150 mm , gi nipple 25 mm x 150 mm isi mark , glass sheet plane size 4 feet x3 feet x 5mm isi mark , tower bolt alumn 125 mm , glass shelf 500mmx 125mm with brass bracket , sliding door bolt alumn 250 mm , spindle brass for 15 mm bib cock , pvc or hdpe water tank cover for 1000 ltr cap , sliding door bolt s s 250 mm grade 304 , door handle 200 mm s s grade 304 , ptmt waste coupling 38 or 40 mm , sliding door bolt alumn 300 mm , ss shower rose 15 mm, 125 mm square , door handle 200 mm alumn , ptmt waste coupling 31 or 32 mm , corrugated waste pipe 38 or 40mm x 800 mm , corrugated waste pipe 31 or 32mm x 800 mm , teflon tape , pvc internal fitting for low level cistern , ply wood 7 feet x3 feet x12mm thick bwr grade isi mark , ply wood 1950x900x12 mm bwr grade , ss handle 100 mm grade 304 , sliding door bolt s s 300 mm grade 304 , pvc urinal waste pipe 31 or 32 mm x 800 mm , pvc or hdpe water tank cover for 300 or 500 ltr cap , cp brass toilet paper holder , corner glass shelf 300 mm with brass bracket , ss handle 75 mm grade 304 , looking mirror 600x450x6mm beveled edge. , ms plug 25 mm isi mark , gi tee 25 mm isi mark , gi union 25 mm isi mark , gi socket 25 mm isi mark , ms plug 20 mm isi mark , gi elbow 15 mm isi mark , gi elbow 25 mm isi mark , gi elbow 20 mm isi mark , gi tee 20 mm isi mark , ms plug 15 mm isi mark , gi tee 15 mm isi mark , gi socket 15 mm isi mark , gi union 15 mm isi mark , gi socket 20 mm isi mark , gi union 20 mm isi mark , gi nipple 15 mm x 75 mm isi mark , gi nipple 20 mm x 50 mm isi mark , gi nipple 20 mm x 100 mm isi mark , gi nipple 15 mm x 50 mm isi mark , gi nipple 20 mm x 75 mm isi mark , gi nipple 15 mm x 100 mm isi mark , gi nipple 20 mm x 150 mm isi mark , gi nipple 15 mm x 150 mm isi mark , gi nipple 25 mm x 100 mm isi mark

CTN :41221022

11 Aug, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6498546 * /dated: 25-07-2025 & & / bid document 1 / 13

Ms Plug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

State Government

Central Government/Public Sector