Latest ms roller scrap Tenders | Government ms roller scrap Tenders

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government/Public Sector

CTN :45054943

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers,gear wheels of sizes ,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, full/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails , ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, bearing adapters,valves of sorts and sizes , brake rigging components, ctrb bearings and its components, connecting rod assemblies, buffer plunger full assemblies , valve springs , buffer spindles, axle box covers, angle cut pieces , main bearing caps, connection straps, cam shaft parts, cut off angle cocks, bss hanger pins, pull rods,damper brackets,center pivot top and bottom parts,cbc couplers,compensating beams,bearing housings/axle box caps, transmission bars, right angle gear covers, cr tanks,traction motor components , vibration dampers, gate valves, isolating valves, ball joint traction lever,tm motor ip cores,cooler headers,roll links,traction centers, liner sleeves,air duct assemblies,brake headers, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Central Government And Public Sector

CTN :45054929

08 May, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - lot of scrap consisting of miscellaneous sort and sizes of scrap ms wagon body &scrap iron plate as available as in the lot.

CTN :45042584

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - sc. miscellaneous ferrous consisting of iron pipe and rod, ms plate, different types of damaged washer, broken chain and stands, cut pieces of ms angle, damaged nuts and bolts, ms channel cut pieces, damaged wire rope sling, ms net, foot steps, damaged fire extinguisher, damaged trolley, ms and gi pipe, broken pantograph, broken cow-catcher, driver seat stand , dust guard, window shutter, ms cock, damaged spare parts of compressor and other different types of scrap ferrous items . condition-1] materials will be delivered on weight basis and weighment will be done on electronic weighing machine of capacity 1 ton in the shed premises only, 2] during delivery if any other materials except ferrous items [as per description] is found within the lot the same is to be segregated and handed over to the custodian. such type of item except ferrous will not be delivered to the purchaser, 3] materials will be sold on as is where is basis.

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45019281

06 May, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - lot no. cwsny0126001,desc.- srl no.[1] u/s & scrap rld.rail 90r, qty-41.17 m, l/f no.-rm/8/30, srl no.[2] rld. g.i pipe 3", qty- 29.00 m, l/f no.-rm/7/23, srl no.[3] rld. window grill with shutter, qty-01 nos, l/f no.-rm/7/66, srl no.[4] rld. window shutter steel, qty-07 nos, l/f no.-rm/7/134, srl no.[5] rld. g.i.pipe 1.25", qty-33.5 m, l/f no.-rm/7/135, srl no.[6] rld. g.i.gutter, qty-36 nos, l/f no.-rm/8/15, srl no.[7] rld. steel door, qty-93 nos, l/f no.-rm/7/278, srl no.[8] rld. connecting rod (t/w), qty-22.5 nos, l/f no.-rm/7/197, srl no.[9] rld. channel 6"x6", qty-36 mtr, l/f no.-rm/7/222, srl no.[10] rld. tie bar u/s fencing, qty-146.99 mtr, l/f no.-rm/7/254, srl no.[11] rld. m.s. rod 25mm, qty-7.3 mtr, l/f no.-rm/7/265, srl no.[12] rld. n.g.rail, qty-36.18 mtr, l/f no.-rm/8/62, srl no.[13] rld. m.s.plate (12mm), qty-20 sqm, l/f no.-rm/8/04, srl no.[14]rld. rail 75 bn, qty-65.36 mtr, l/f no.-rm/8/53, srl no.[15] rld. steel window, qty-02 nos, l/f no.-rm/6/283, srl no.[16] rld. fencing grill, qty-32 nos, l/f no.-rm/8/54, srl no.[17] rld. iron angle frame (jail door net), qty-05 nos, l/f no.-rm/8/59, srl no.[18] rld. ismc 150, qty-34.62 mtr, l/f no.-rm/8/55, srl no.[19] rld. angle 65 x65x6 , qty-76.38 mtr, l/f no.-rm/7/282, srl no.[20] rld. angle 65 x65x8, qty-14.34 mtr, l/f no.-rm/8/34, approx. total ferrous weight-12.900 mt.

Central Government/Public Sector

CTN :45031651

06 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s bazaar scrap such as various types of filters, dust shield spring and including highly corroded nature of foot steps, berth frame, fs shutters, transfer trolley, trolley wheel, car body filter, showel w/wo handle, cot, vacuum cylinder, vacuum chamber, corroded/ dinged/ damaged wagon door, mortar pan, wire powrah, h s lamp, corroded drums of various capacity, zinc coated fs sheets, wagon floor sheet, g.i. sheet, guide spring, guide ring, foam ladder, small paint tins,saw blade, fire bucket, main switch stand, coach door, sliding door, battery boxes, battery box door, collapsible gate, thin spring of various shapes, sorts and sizes in corroded condition, highly corroded nature items (cut barrels, corroded paint drums & barrels), air filter,highly corroded nature items (paint drums), empty dpt can (bazaar), punches plate/ sheet/ screen, corroded shear cutups, ms angle,half cut barrels, traction motor filter (bazaar), channel, cut rails, roof light/tube light fitting, fl housing regulator box, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, gi pipes with/without valves, ci covers, corroded/ damaged/ dinged condition coach/wagon cutup parts, sheets, equalizing stay, brake anchor, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope/safety rope with/without aluminum sling and all other ms/ci/fab items of highly corroded nature and all the above items are of sorts and sizes in full/cut/broken/damaged and with/without minor nfs attachments including loose bits as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: (1) cutting not permitted. (2) during delivery, if any major nfs items found, the same needs to be handed over to custodian. location: 1)14th pathway lhs adjacent to bin 1, 2)14th pathway lhs bin 1, 3)14th pathway rhs wall end.

Ms Roller Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector