Latest ms roller Tenders | Government ms roller Tenders

Central Government/Public Sector

CTN :42764067

10 Dec, 2025 NA

Yamunanagar - Haryana

Tender For supply of spherical roller bearing no. 22212

corporations/Associations/Others

CTN :42721086

10 Dec, 2025 1.50 Crore

Kumbakonam - Tamil Nadu

Tender For revamping civil infrastructure - construction of maintenance shed, office room and store in one roof, canteen and providing cement concrete flooring for parking area and in tnstc depot at chidambaram - earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification., supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the corporation officials., supplying and filling gravel in layers of not exceeding 15cm thick including watering well ramming and consolidation etc., complete as directed by the corporation officials., providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 250mm thick specification including premixing the materials with water at omc in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratoy roller to acheive the desired density including cost of material, labour charges,rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth rev-5 and as directed by the corporation officials., cement concrete 1:5:10 (one cement, five sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification, plain cement concrete 1:2:4 (one part of cement, two parts of sand and four parts of aggregates) using 20mm hbg jelly for flooring including finishing and supplying and fixing tar pad 12mm thick complete as directed by the corporation officials., supplying, fabricating and placing in position mild steel / ribbed tor steel grills for all rcc works as per design given including cost of steel and g.i. binding wire in all floors etc. complete complying with standard specification. (contractor has to make his own arrangements for the supply of steel and binding wire), reinforced cement concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all rcc items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers, supplying and erecting steel centering including necessary supports for plane surfaces for reinforced cement concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 bg stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (payment for centering shall be given after the concrete is laid), foundation & basement, super structure, brick work using country bricks of size 9" x 4-3

Central Government/Public Sector

CTN :42763282

05 Dec, 2025 NA

Avadi - Tamil Nadu

Tender For supply of single row cylindrical roller bearing

Central Government/Public Sector

CTN :42764462

08 Dec, 2025 NA

Ajmer - Rajasthan

Tender For supply of cylindrical roller bearing nu-326 ecmc4 (riveted), as per rdso specification mp.0.2402.03 rev.04 (april 2021) or latest , make skf/fag (imported) only.

Central Government/Public Sector

CTN :42763924

22 Dec, 2025 NA

Barmer - Rajasthan

Tender For supply, installation and commissioning of light weight wheel skate trolley for seized roller bearing wheel for all type rolling stock as per attached specification.

Central Government/Public Sector

CTN :42755050

27 Nov, 2025 NA

Narsinghpur - Madhya Pradesh

Tender For supply of bearing,roller,cylindrical,nu 310_schedule 1 _ item_10_m1920661000_100256352 , bearing,roller,cylindrical,n 314_schedule 2 _ item_110_m1920631400_100256352 , brg,rlr taper,32222_schedule 3 _ item_160_m1955322200_100256352 , bearing,roller,cylindrical,nu 216_schedule 4 _ item_180_m1920561600_100256352 , bearing,ball,radial contact,6310-zznr_schedule 5 _ item_210_m1902631078_100256352 , bearing,ball,angular contact,3308-zz_schedule 6 _ item_260_m1912330899_100256352

Central Government/Public Sector

CTN :42759671

24 Nov, 2025 NA

Korba - Chhattisgarh

Tender For supply of 10_ m1970353575_ bearing, roller, spherical, 294/710-e1mb , 20_ m1954990019_ bearing, roller, sph thrust, 294/500 em

Central Government/Public Sector

CTN :42737819

24 Nov, 2025 NA

Barh - Bihar

Tender For supply of pr 100260701 10 m1970230633 bearing, roller, spherical, 230/600-b+

Central Government/Public Sector

CTN :42588455

22 Nov, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of e5153211 - set of roller arm. bearing de & nde (indigenous) , (1 set-3 type brg each 1 no. )

Central Government/Public Sector

CTN :42741030

17 Nov, 2025 NA

Ramgarh - Jharkhand

Tender For supply of spare parts for repairing of pressure jet make hydro test pump kdd-22 at 3x800 mw pvunl patratu stpp site on for destination basis - laying and jointing pvc pipe. heading, kdd/vb-57-plunger seal aramide-22mm kit, kb and kd-oil seal kit (new), kdd white metal kit (3 set in 1 kit) (std), kdd-complete valve kit, cylindrical roller bearing-nu 2210 ecj, spherical roller bearing-21313e, t-70 pressure regulating valve, freight charges

Ms Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors