Latest ms round bar Tenders | Government ms round bar Tenders

Co-operative

CTN :40475982

02 Jun, 2025 5.35 Lacs

Jaipur - Rajasthan

Tender For 12 g choti gss godawn consttruction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm/sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm-(guter sheet), , 3" dia round ms pipe (isi marked), , 1.25" dia round ms pipe (isi marked), , 1.5 "x3" rectanglar ms pipe marked) (isi, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with washer, , welding rod 10no, , enamel paint black (isi marked), , cement paint (snowcem), , white wash (lime), , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together through their entire length, inside and outside locking with push and pull operation,including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , window (z section + mullion), , ventilator (z-section), , steel sq bar, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia, , unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia bend, , cutter wheel (5")

Co-operative

CTN :40476121

30 May, 2025 5.30 Lacs

Jaipur - Rajasthan

Tender For 94 takhthajra gss ltd godawn item construction item - profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm /sqm , plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm/sqm, , 3 dia round ms pipe (isi marked), , 36 on, , 14, , 1.25" dia round ms pipe marked) (isi, , 1.5"x3" rectanglar ms pipe (isi marked), , 12, , 80, , 8, , w, , angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), , screw 12x55 no 2.25" long with waser ( make tata), , welding rod 10 no, , cement paint (snowcem), , white wash (lime), , enamel paint black (isi marked), , ventilator (z-section), , window (z section + mullion), , steel sq bar, , roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together throgh their entire length, inside and outside locking with push and pull operation, including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, , air fan 24" dia with fiber sheet base, , unplasticzed poly vinal chloride, , (upvc) pipe type b (is13592:1992 marked) 110 mm dia, , unplasticzed poly vinal chloride, , 10 (upvc) pipe type b (is13592:1992 marked) 110 mm dia bend

Central Government/Public Sector

CTN :40363088

30 May, 2025 72.45 Lacs

Dipka - Chhattisgarh

Tender For corrigendum : procurement of spares of 1000 tph semi mobile crusher - scrapper bar hd part no bd1000cf501 , scrapper chain part no bd1000cf502 , chain lock bolt part no bd1000cf503 , nylock nut part no bd1000cf504 , sprocket hd part no bd1000fb303 , sprocket hd part no bd1000fb403 , fly wheel part no bd1000fb506 , locking assembly part no bd1000fb507 , scrapper bar hd part no bd1000fb601 , chain lock bolt part no bd1000fb603 , nylock nut part no bd1000fb604 , sprocket hd part no bd1000cf303 , sprocket hd part no bd1000cf403 , joining linc part no bd1000cf505 , scrapper chain part no bd1000fb602 , joining linc part no bd1000fb605

Central Government And Public Sector

CTN :40473076

18 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of m.s. plate (2 nos.) (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawi ng no.-rdso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 no s. insulation plate, 4 nos. nylon washer & 4 nos. nylon bush). [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40473079

18 Jun, 2025 NA

Multi City - Multi State

Tender For supply of m.s. plate (locking bar assembly) required for 1:8.5 tws turnout as per rdso drawing no.-r dso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (2 nos. insula tion plate, 4 nos nylon washer & 4 nos nylon bush) [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :40485474

11 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply and installation of ats distribution board of dimension 700 x 1600 x 365 mm. the en closure should be made of glass-fiber reinforced polyester (grp) enclosure ingress protection of ip66 (iec 60529) & mechanical impact strength of ik10 (iec 62262). enclosure is having double-insulation (iec 6043 9-1) & is also uv stabilized (iec 62208). material is self-extinguishing (upto 960 degree c - iec 60695-2). o perating temperature ranges from -30 degree c to +120 degree c (iec 60670). rated ac voltage of 1000v and rated dc voltage 1000v . the enclosure gasket materials shall be injected polyurethane. the enclosur e having 180-degree door opening and double bar key locking arrangement. incomer: 185 sq.mm busbar type terminal block - 8 nos for eb and dg incomer with 230v ac r, y, b indicating lamp. 400a fp automati c transfer switch motorized with inbuilt lcd controller and outgoing: 185 sq.mm busbar type terminal blo ck - 4 nos - provision for termination of 185 sq.mm cable in incomer from the top side and 185 sq.mm cabl es for outgoing from the bottom. the manufacturer should submit all the test certificates in accordance wit h iec 61439, routine test report must be made with - high voltage test, insulation resistance test, function al test. the wall mounting frame should be made of hot dip galvanized materials. acceptable make : ca pe/ famatel/hensel/rittal/abb with following switch gear and terminals fixed in the junctio n box as per drawing enclosed. terminal block make: connect well/ elmex switch gears mak e shall be abb/l&t /eaton/siemens,havells, c&s. terminal block makes:connect well/ elmex. [ warranty period: 30 months after the date of delivery ]

CTN :40467775

14 Jun, 2025 NA

Dhemaji - Assam

Tender For supply of galvanised steel chain link fence - laip 3750mm long , laip 2000mm long , concertina coil , barbed wire , binding wire 0.90mm dia , galvanized steel chain link fence , nut bolt 12mm dia 60mm long , nut bolt 12mm dia 100mm long , flat iron 50x6mm , 10mm dia ms round bars , ordinary portland cement grade 43 , coarse sand , 20mm stone aggregates , 40mm stone aggregates , installation of chain link fence

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

CTN :40362053

06 Jun, 2025 NA

Ernakulam - Kerala

Tender For indigenisation of aircraft gse items - indigenisation of tow bar 24 albar , indigenisation of bar assembly steering , indigenisation of main rotor blades restraint set , indigenisation of locking collar tlg , indigenisation of chock land based , indigenisation of grounding system helicopter

State Government

CTN :40436394

23 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply under etd-i lucknow - supply of t&p materials associated with line and substation under electy. transmission division-i, lucknow, mechanical hydraulic compressor joint machine motorized, for htls conductor jointeing with htls conductor die (iso certified) minimum technical spedification-capacity : 100-150 ton, power : 05-5.5 hp, stroke : 04 stroke, working pressure : 690 bar) with minimum 03 year warranty. nike or equivalent make, accc htls casablanca conductor jointing hydrolic machine, capacity 100 ton with minimum 03 year warranty. (nike or equivalent make), 05 kv digital insulation tester (megger, motwani or equivalent make) li-ion battery extended capacity, rapid charge and other required ts with minimum 03 year warranty., digital multimeter (4 1/2 digit) (motwane make or equivalent) with minimum 01 year warranty., clamp on meter-digital (fluke or equivalent make ) (0-300-600 a), ac and dc voltage to 600v and resistance to 40 kilohm with minimum 02 year warranty., accc htls conductor jointing toold & wheels etc., four sheave pulley nike or equivalent make with tech spec-breaking capacity 300 kn or more, 22 or more groove, rigit frame type, chain pulley block (5 mt) nike or equivalent make., binocular telescope nikon or equivalent make with tech spec-objective lense dist-50, magnification maximum 8, multilayer coated lense 11.8 mm., tool box with wrench set (nike, taparia or equivalent make) having items-b1 hexagon ringh spanner 6x7-30x32 mm (12 pcs.), double open end spanner 6x7-30x32 mm (12pcs.), pipe wrench (02 pcs), grip locking plier (01 pcs.), circlip plier internal straight (01 pcs.), circlip plier external straight (01 pcs.), side cutting plier (01 pcs), combination plier (01 pcs), long nose plier (01 pcs.), water pump plier (01 pcs.), plastic hammer (01 pcs.) ball pein hammer (02 pcs.), screw driver philips pattern 100 & 150mm (02 pcs.) flat screw drivers 250 & 300mm (02 pc.), two-in one screw drivers (02 pct.), adjustable wrench (01 pcs.), 12.5 square drive sockets 8-32mm (22 sockets) (22 pcs.), reversible ratchet (01 pcs.) extension bar (02 pcs.), safety belt (karam full body harness pn 42, udyogi ub102 or equivalent) with minimum 03 years warranty., hydraulic conductor cutter machine use for all acsr, accc type conductor (nike equivalent make) as per technical specification- (size-3/8 inch, weight-5 kg, usage/application-industrial, warranty- 1 year, crimping stroke-700 bar, cutting capacity-up to 40mm material-ms, hydraulic pressure bar-700, packaging type-tool bos) with minimum 02 years warranty.

Ms Round Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Co-operative

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government