Latest ms scraper Tenders | Government ms scraper Tenders

State Government

CTN :45431233

18 Jun, 2026 NA

Kollam - Kerala

Tender For supply of one year amc for gea equipment - herringbone milking parlour, underground manure pumps, rope driven dung scraper with four alley, tmr wagon

Corporations And Associations And Others

CTN :45459873

22 Jun, 2026 NA

Jalandhar - Punjab

Tender For machinery spares - supply or machinery spares c.s. trach plate machined confirming to is-1030 grade 23/45. free from blow holes as per drg. grooving as per drg.-1020-mh-0402-01-171 (rate should be quoted lum sum) (mill no. 1) drilling as per drg. --do--(rate should be quoted lum sum) (mill no. 1) grooving as per drg. bcsm/mh/113 (mill no. 2) drilling as per drg. -do- (mill no. 2) grooving as per drg. bcsm/mh/112 (mill no. 3) drilling as per drg. no. 3) --do (mill grooving as per drg. bcsm/mh/112(mill no. 4) drilling as per drg. 4) -do--(mill no. mill no.1 c.s. scraper with machining as per drawing 1020-mh-0402-01-255 & 256 grooving of top scraper as per drg.1020-mh 0402-01-256/rate should be quoted lum sum) grooving of discharge scraper as per drg.1020-mh-0402-01-255(rate should be quoted lum drilling as per drg. do(rate mill no.2 should be quoted lum sum) m.s. scraper with machining as per drawingmh-ts-02-r1 grooving of top scraper as per drg. ----------do----(rate should be quoted lum sum) drilling as per drg. should be quoted lum sum) -----do---------(rate m.s. scraper with machining as per drawing mh-ds-02-r1 grooving of discharge scraper as per drg. -do---------(rate should be quoted lum sum) drilling as per drg. should be quoted lum sum) --do---------(rate mill no 3&4

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

State Government

CTN :45381292

08 Jun, 2026 38.05 Lacs

Nandyal - Andhra Pradesh

Tender For restoration & improvements to 12 nos. radial crest gates with hoisting equipment and 1 no. of 40 ton capacity gantry crane and 2 nos. service gates and 2 nos. of emergency gates of river sluice of n.s.r.s. srisailam project- 1" nylon rope , 1/2"nylon rope , 125a 4 pole mccb,25 ka (l&t) mat-02956 , 2 pole mcb as per field sample standard make , 20kg hyco high pressure pnuematic grease gun , 3" double layer paint brush , 4" double layer paint brush , 4mm welding electrodes , anker chain pulley block, for single grinder crane, capacity: 1 ton maximum lifting height 12m , bamboo ladder 10feet , bamboo ladder 12feet , bosch cutting wheel , broom sticks , cotton waste complete white , current transformer ct coils 5amps , electricians , fitter class -i , gi bolts/nuts and washers , helper , mechanic cl- i , operator spillway / sluice gate , over load relay 40a , paint removal iron scraper , power contactor make l&t mnx-70 , provision for rewinding and bearing of 30 hp and 25 hp electric motors including dismantling, rewinding of stator coils with suitable copper winding wire, insulation, varnishing, assembling, testing, commissioning, and providing necessary internal and external wiring. , provision towards labour charges for removal of honey bee hives which will exist at walk way bridge, hoist bridge,arm girders of r.c.gates etc., , pvc tapes , radial crust gates operating panel display model : conzerv dm3110 , red oxide iron primer paint gr.i , rotary level selector switch 2 ways on/off , synthetic enamel grade i paints ( various colours as per eng-in-chrg )(asian/berger)(block ,yellow) , tinnar oil , washing soaps , welder , wire brushes

corporations/Associations/Others

CTN :45045205

14 May, 2026 1.63 Crore

Raigad - Maharashtra

Tender For supply of tent , chair , table , torch , dragon torch , rain suit , patrolman stick , punji , pick axe beater , walkie talkie , clip applicator , rail disc cutter , rail disc cutter wheel stone , rail drilling machine , rail drilling tool , chamfering kit , at welding trimmer , rail heating blower for at weld , thermit welding tool set , rail profile weld grinder , rail grinding stone , straight edge , track jack , track jack mechanical , rail dolly , rail tong , prc sleepers chain , joggled fish plate , fish plate 1 mtr long , c clamp , anti sabotage device , anti sabotage device key , fish bolt spanner , hammer 5kg , hammer 3kg , digital toe load measuring device , rail tensioner , hydraulic sleeper spacer , mono rail wheel barrow , portable dc welding generator , rail wear gauge , continuous rail thermometer , laser distance meter , electric jumper wire , jim crow , rail thermometer , pwi inspection kit , versine measuring kit , track gauge cum level , destressing roller , off track tamper , off track tamper trolley , tamping tools , acd male , acd female , electric arc welding machine , banner flag , hs flag red , hs flag green , safety jacket , safety helmet , safety shoe , tricolor torch , number plate , staff for patrol man , key man bag , breathe analyzer , keying hammer , pway inspection trolley , material trolley , dip lorrey , measuring tape 30mtr , measuring tape 15mtr , measuring tape 5mtr , steel sections cutting equipment , plate screw tubular spanner , wire basket , adjustable spanner , whistle , powrah spade , rake ballast , pan mortar , wooden blocks , chain saw , bush cutter , tarpaulin , grease , grease gun , caution indicator boards , speed indicator boards , termination boards , column posting for boards , generator , remote controlled gang hooter , safety goggles , ambient temprature thermometer , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge 1m , measuring tape 30m , log line with 20 kg mettalic clinder , probing rod , inside calliper outside calliper , feeler gauge , mirror 10x15 cm , bridge inspection torch light , magnifying glass 100 mm , piano wire with clamps , plumb bob , steel scraper , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , safety belt , duro meter , auto level , hydraulic torque wrench , hexagonal crowbar , tommy bar , fire buckets with stand , emergency medical hand stretcher , first aid box - first aid box , tool box , hammer 500gm , gum boots //bid details 2 / 96

CTN :44806172

18 Apr, 2026 40.00 Lacs

Lakhimpur Khiri - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; supply and installation of hardware, teacher training, other staff training, e-content, lab equipment for sewing machine operator 2, assis. beauty wellness consultant 2 c.. - applicator brush, hydraulic chair with footrest, blackhead remover, body massage bed, bowles, curling tron (curling tong), eyebrow pencil sharpener, facial steamer, foot scraper, foot spa, galvanic machine, hair brush

Ms Scraper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

Co-operative

State Government

corporations/Associations/Others