Get complete information related to latest Ms Shutter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Shutter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Shutter Tenders.
Tender For fixation of local market rate of material items for implementation of mgnrega schemes under rampurhat ll development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia,
Tender For bid to ras supply of adjustable strip head 0 point 60 mtr long 38mm dia with u hend for i section , bailey cribs 6 ft x 2 ft x 2 ft is code 800- 1986 , base plate size of 15 cm x 15 cm x 5 mm for ms pipe is code 1229-1968 part ii , msshuttering plate 1000 mm x 1000 mm , msshuttering plate 1000 mm x 200 mm , msshuttering plate 1000 mm x 500 mm , msshuttering plate 1200 mm x 300 mm , msshuttering plate 1200 mm x 400 mm , msshuttering plate 1200 mm x 600 mm , msshuttering plate 1200 mm x 1000 mm , nut and bolt for shuttering 12 mm dia 40 mm long , right angle coupler , msshuttering plate 1000 mm x 1200 mm , msshuttering plate 1000 mm x 600 mm , s coupler
Tender For restoration of rain damages of lwss panjehra (old) in tehsil nalagarh distt. solan (hp) (sh: - p/l press steel door frames and msshutters at palli).
Tender For restoration of rain damages of lwss chharoli brahmna 1 stage in tehsil nalagarh distt. solan (hp) (sh: - p/l press steel door frames and msshutters at palli).
Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi