Latest ms special Tenders | Government ms special Tenders

Central Government/Public Sector

CTN :45713891

20 Jul, 2026 20.00 Lacs

Chandimandir - Haryana

Tender For repair / maint of split acs 2/1.5 ton , windows acs 2 / 1.5 ton , voltage stablizers and connected items installed at command hospital (wc) and other various location in aor of age e/m ch - servicing of split type ac of capacity 2/ 1.5 tr after disconnecting all incoming and outgoing electric connection, water drain pipe line connection etc. and wash with approved chemical mixed water with the pressure pump, after servicing cleaned all the disturbed area and reassembling the water/electric connection and testing for entire satisfaction of engr-in-charge., all as per item no. 1 here-in-above but window type ac 2/1.5 tr capacity., supplying and charging of refrigerant gas r-22 only after vacuuming dehydration, leak testing of the system as per standard practice testing for proper cooling effects and satisfactory performance complete all as specified and as directed by engr-in-charge for room split/window type ac of capacity 2/1.5 tr., all as per item no: 3 above but gas r-32, all as per item no: 3 above but gas r-410a., all as per item no: 3 above but gas r-134a., taking out defective capacitor of capacity 50+6 mfd after disconnecting all incoming and outgoing electric connection including supply & fix new capacitor on same place and testing complete all as specified and as directed by engr-in-charge, all as per item no:7 here in above but of capacity 45+4 mfd ., all as per item no:7 here in above but of capacity 45 mfd ., all as per item no: 7 here in above but of capacity 6 mfd ., all as per item no: 7 here in above but of capacity 4 mfd ., supply & fixing as in replacement copper pipe 1/2" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 1/4" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 5/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply & fixing as in replacement copper pipe 3/8" for liquid line including fittings and testing complete all as specified and as directed by engr-in-charge., supply and fixing of insulation foam for copper pipe of size 1/2" after removing old one., supply and fixing of insulation foam for copper pipe of size 1/4" after removing old one., supply and fixing of insulation foam for copper pipe of size 5/8" after removing old one., supply and fixing of insulation foam for copper pipe of size 3/8" after removing old one., supply and fixing as in replacement of pvc flexible pipe 15 mm dia including any fittings as required complete inclusive of any type of leakage testing., all as per item no: 20 above but pipe of 20 mm dia., supply and fixing as in replacement of pvc water drain pipe 25 mm dia complete inclusive all fittings and any type of leakage testing., material and labour for sub main wiring with 2 x 2.5 sqmm +1 x 2.5 sqmm single core flame retardant pvc insulated unsheathed cable with stranded copper conductor drawn in and including heavy grade frlsh pvc concealed conduit isi marked with all accessories on walls and making good the disturbed surfaces including all conduits fittings, clamps guittes etc for earth dbs and boxes with proper thimbles all as directed by engr-in-charge. note :02 run of 2.5 sqmm , 01 run of 2.5 sqmm cable and 01 run of conduit shall be measured as one unit and paid accordingly., all as per item no: 23 here in above but of size 2x 4 sqmm +1x 4 sqmm., m&l cutting chases, pinning in stone concrete block or slab walls & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring ,etc., and making good, cutting exc. 10 cm girth., supply and fix as in replacement of rigid non-metallic pvc conduit of size 20

CTN :45737807

21 Jul, 2026 NA

Delhi - Delhi

Tender For supply of revolving chair , modular table , cantilever office chair ms frame , file storage cabinet , cantilever office chair , revolving chair having tiling mechanism , executive table , cantilever office chair with ms frame , revolving chair with locking arrangement , cantilever office chair with ms frame with cushioned , cabinets large made of waterproof , sofa set 3 seater exclusive catalogue , sofa sete 1 seater , center table glass , 15 seater , 30 seater , steel bookcase , modular table made of waterproof , round marble dining , circular cafetria , wooden podium , student writing pad , rectangular ss table , fiber rainforced , magnetic white dry , sofaboard core material , laboratory steel f , mild steel heavy duty , reception table for office revolving chair having tiling mechanism with locking arrangement and gas lift, hydraulic cylinder and wheel with 5 casters roller wheel upholstered in superior quality cloth fabic/ leather foam., modular table made of waterproof 19mm thick commercial board with 1.00mm thick laminate table/0.4mm teak venner with drawers and shutter and keytray and including all hardware fittings with complete duly melamine polish. size: 8'x4', ms frame with cushioned seat with pin hole rubberized/pu cushion covered with superior quality cloth/leatherette of approved design, quality and shade finished with fine quality., file storage /cabinet made of waterproof 19mm thick commercial board with teak wood beeding on all edges. the outer surface will be finished with 1.00 thick sunmica/0.4 mm thick teak veneer of approved colour and shade appropriate colour with locking arrangement having shelves and all necessary hardware fitting finished with fine quality melamine polished * /bid number : gem/2026/b/7727045 + /dated: 30-06-2026 ' ' / bid document 1 / 34

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45717581

06 Jul, 2026 4.03 Lacs

Multi City - Telangana

Tender For supply and delivery of leakage materials etc in div.no.12,13,18,19,20,21,22,23 (amc 2026-2027) reserved for st societies / st individual under general funds - supplying and delivery of gi bolts and nuts with double washer conforming to is specification including cost and conveyance to site and taxes etc. complete, supplying and delivery of 6mm thick rubber packing conforming to is specification including cost and conveyance to site and taxes etc. complete, supply and delivery of rendroc plug quick setting cement, including cost of materials and all conveyance charges etc,. complete.(with latest manufacture date), supply and delivery of packing rope for arresting of leakages., supply and delivery of lead wool best quality including all transportation charges, all charges etc complete., supply and delivery of clamp set incliding cost all labour charges etc., complete. 150mm dia, 110mm dia, manufacture, supply and delivery of tee including all transportation charges, all charges etc complete. od 160mm, manufacture, supply and delivery of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (150 mm diax 15 mm thick)

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

Central Government/Public Sector

CTN :45702741

08 Jul, 2026 NA

Salem - Tamil Nadu

Tender For auction sale of pway scrap - condemned and u.s cl.iii released ms scrap - fish plate 52kg 0.61cm - 113, fish plate 90r - 94 nos, ms bolt of sizes - 2275 nos, metal liner of sizes - 21270 nos, ms special bearing plate - 114 nos, slide chair - 274 nos, stretcher bar 52kg - 40 nos., gauge tie plate of sizes - 15 nos, ms plate - 15 nos., plate/rail screws - 1421 nos. total qty - 21.603 mt, s.1539 no. - 951701 dated 03.06.2025

CTN :45656638

01 Jul, 2026 69.78 Lacs

Thiruvarur - Tamil Nadu

Tender For providing kitchen equipment and its accessories for two mess block of boys hostel and girls hostel in cutn thiruvarur - supplying, installation, testing, and commissioning of 85 kg/hr gas-operated steam boiler for kitchen application including all accessories etc., as required. a) gas-operated steam boiler design: cylindrical multipurpose boiler maximum steam output (@100°c): 80-90 kg/hr outlet steam condition: dry, saturated max. working pressure: 10 kg/cm² max. operating pressure: 3-4 kg/cm² safety valve set pressure: 10 kg/cm² b) mountings & fittings details main steam stop valve - 25 mm nb - 1 no. safety valve - 15 mm nb - 2 nos. shell blow down valve - 25 mm nb - 1 no. air vent valve - 15 mm nb - 1 no. isolation valve along with pressure gauge - 1 no. control bannet valve set c) t-series burner fuel: lpg type: monoblock fuel consumption: 5.8 to 6.5 kg/hr d) m.s. straight chimney, nuts & bolts, template for foundation, foundation bolts, including painted with heat resistant aluminium paint and foundation etc., as required diameter: 150 mm height: 6 m (vertical) + 1 m (horizontal connecting pipe) sheet thickness: 5 mm e) made: boiler outer shell 6 mm ss 304 grade plate (2-layers). inner shelled & kid ring is made out of 2 mm ss 304 grade stainless steel sheet & bottom 3 mm. f) type of boiler: super boiler, dimension: 35" od x 50" ht, water capacity: 750 litres

State Government

CTN :45696031

02 Jul, 2026 NA

Palwal - Haryana

Tender For supply of furniture for the office of svsu skill innovators foundation - description for the furniture for the office of ssif, svsu., executive director table with side storage unit. size: approx. 2400 mm (l) 900 mm (w) 750 mm (h). made from premium quality engineered wood/action tesa/merino laminated board/pre-laminated particle board of minimum 25 mm top thickness and 18 mm side panels. matte finish laminate with pvc edge banding (2 mm thick). color combination: tan or brown. integrated side credenza with lockable drawers, open shelves, cpu space, keyboard tray, wire manager, cable routing grommets, modesty panel, and storage cabinet. high-quality hardware and accessories from reputed brands such as ozone, hettich, hafele, godrej, door set, century, or equivalent. corrosion-resistant fittings and telescopic channels. scratch-resistant, termite-resistant and moisture-resistant surface finish. environment-friendly manufacturing process using low voc materials. five-stage quality inspection before delivery and installation., boss chair (high back executive chair)premium executive high-back ergonomic revolving chair with adjustable headrest and lumbar support. upholstered in high-quality leatherette/pu upholstery. heavy-duty chrome/nylon base with 360 swivel mechanism. class-4 gas lift for height adjustment. multi-lock synchro tilt mechanism with tension control. padded armrests. seat and back made from molded high-density pu foam for superior comfort. load-bearing capacity minimum 120 kg. suitable for long working hours. color: brown. warranty: minimum 1 year., visitor chair (mid back): seat and back frame made from commercial-grade plywood with molded high-density foam cushioning. upholstery in premium leatherette fabric. heavy-duty powder-coated/chrome-finished metal frame. color: tan/brown. ergonomic mid-back design for visitor comfort. dimensions: seat width 19 inches, seat depth 19 inches, seat height 20.5 inches, back height 19 inches. weight capacity: up to 100 kg minimum. anti-rust frame finish with floor-protective nylon bushes., sofa set (5 seater): premium 5-seater sofa set consisting of one 3-seater and two single-seater sofas or equivalent configuration. solid hardwood/seasoned wooden frame structure. high-density resilient foam cushioning with premium leatherette upholstery. comfortable back support and armrests. scratch-resistant and easy-to-clean finish. color: brown/tan/beige as approved by purchaser. heavy-duty construction suitable for office reception and executive lounge areas, t.v (43 inch / 40 inch) 43-inch (or 40-inch) full hd/4k smart qled television with google tv/android tv operating system. minimum resolution: 1920 1080 (full hd) or higher. built-in wi-fi, bluetooth connectivity, screen mirroring, chromecast support, voice-enabled remote control. hdmi (minimum 2 ports), usb (minimum 2 ports), ethernet port. wall mounting kit and installation included. reputed brands., coffee table: - premium center/coffee table made from 36 mm thick plywood/engineered wood structure with matte laminate finish. square shape. approximate size: 900 mm 900 mm 450 mm height. smooth edges with pvc edge banding. sturdy load-bearing design suitable for executive office and lounge areas. scratch-resistant and easy-maintenance finish. color matching with sofa set and office interiors., office partition: - decorative office partition with overall size approximately 144 cm (w) 182 cm (h). three-panel folding design. strong engineered wood/solid wood frame with cnc-cut decorative art deco/jaali pattern. color: white and brown. easy folding and relocation facility. stable base support with anti-slip feet. suitable for creating executive office privacy zones and waiting area segregation. premium finish with smooth edges and durable construction., file cabinet vertical storage cabinet made from premium quality engineered wood with matte laminate finish. color: off white wood grain. dimensions: w 30" d 14" h 72". multiple storage com

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

State Government

CTN :45263804

01 Jul, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

Ms Special Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government