Latest ms stand Tenders | Government ms stand Tenders

State Government

CTN :45430846

15 Jun, 2026 9.44 Lacs

Ambala - Haryana

Tender For corrigendum : replacement of air conditioning system in judicial court complex ambala (pdg. copper wire for control cabling and indoors power, software for remote controller and ms stand odu etc.).

State Government

CTN :45531870

18 Jun, 2026 2.22 Lacs

Kangra - Himachal Pradesh

Tender For providing installation testing and commissioning of 1.50 hp submersible pump set with allied accessories and providing fixing ms stand post and water tank at village kharanal at pamadu other location

Central Government And Public Sector

CTN :45537202

03 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of supply, installation & commsiisoning of 220 v, 550ah san container battery,supply of 2v, spare cell for 550 ah battery along with required acid and all necessary accessories,removal of old battery (220 v, 300 ah) , ms stand and installation &commissioning of new battery

CTN :45512468

02 Jul, 2026 NA

Pune - Maharashtra

Tender For air cooled ducted 16.5 tr ac unit , air cooled ducted 5 tr ac unit , unloading lifting and shifting of 16.5 tr ducted package ac unit at site , unloading lifting and shifting of 5 tr ducted package ac unit at site , installation n2 pressure testing vacummising and commissioning of 16.5 tr ac , installation n2 pressure testing vacummising and commissioning of 5 tr ac , supply and charging of r 410 gas , supply and inst of floor mounted ms stand fabricated out of ms channel , supply and inst of floor mounted ms stand fabricated out of ms angel , hard copper refrigerant piping between indoor and outdoor units , supply and installation of gss ducting as 24g , supply and installation of gss ducting as 22g , acoustic insulation of plenum initial ducting with 10mm thick armasound , supply and fixing of 13mm thick nitrile rubber al foil faced insulation class i , supply and installation of ai powered jet nozzles with volume control damper , supply and inst of ai powered return air grills without volume control dampers , supply and installation of gi opposed blade duct dampers, qty 1.5 sqmtr , supply and fixing of canvas connection , supply and laying of 32mm dia pvc drain piping , electrical cabling 6 c x 1.5 sqmm cu flexible , electrical cabling 3 c x 1.5 sqmm cu flexible , electrical cabling 1 sqmm cu flexible double earthing * /bid number : gem/2026/b/7581741 + /dated: 11-06-2026 ' ' / bid document 1 / 24

CTN :45513101

22 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For assy oil filter , gasket tappet , spark plug , brake pad , oil filter for sx4 , oil filter of ciaz , pad , front brake pipe , rear door beeding , disc clutch , assy kit lined shoe rear , steering ball joint , disc pad , oil filter , air filter , front brake cable , element oil filter , oil seal , ac filter , mirror rear view lh , oil seal , bulb 12h7 55w head lamp , fog lamp bulb , wiper blade rear 330 ms bcs , wiper blade front 600 driver ms bcs , brake disc

CTN :45527844

22 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of 1.5 ton ac , 2.0 ton ac , supply and fixing of ms stand , supply and laying of cable , supply and installation of electric water cooler , supply and installation of deep freezer , supply and installation of refrigerator , supply and installation of desert cooler , supply and fixed mcb 20 amp , supply and fixed sub main wiring , supply and fixed copper wire , supply and fixed pvc drain pipe

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45521875

22 Jun, 2026 NA

Kota - Rajasthan

Tender For supply cable 70 sqmm x 3 point 5 core alumunium , supply 16 sqmm x 3 point 5 core alumunium , supply 1 point 5 sqmm x 3 point 5 core copper , supply 4 sqmm x 3 point 5 core copper , supply 2 point 5 sqmm x 3 point 5 core copper , supply 25 sqmm x 3 point 5 core alumunium , supply 35 sqmm x 3 point 5 core alumunium , sitc distribution box panel flp , sitc distribution box non flp having contactor and emergency shut down buttom , sitc distribution box llight panel flp , sitc distribution box panel light non flp , sitc dol starter 5 hp , sitc dol starter 2 hp , sitc dol starter 3 hp , sitc dol starter 10 hp , sitc flp dol starter 5 hp , cable glands non flp for 70 sqmm cable , cable glands non flp for 35 sqmm cable , cable glands non flp for 25 sqmm cable , cable glands non flp for 4 sqmm cable , cable glands non flp for 2 point 5 sqmm cable , cable glands non flp for 1 point 5 sqmm cable , cable glands flp double compression for 16 sqmm cable , cable glands flp double compression for 4 sqmm cable , cable glands flp double compression for 2 point 5 sqmm cable , cable glands flp double compression for 1 point 5 sqmm cable , cable laying and and as per detailed specification of tender attachments , cable glanding , connections, terminations , excavation for cable laying , sitc of well glass led lights 90 watts flameproof complete set with drivers etc , sitc of non flp normal under roof led lights 90 watts flameproof complete set with drivers etc , rubber mats 1 m wide , earrthing strips supply and laying 50 mm x 2 point 5 mm , earrthing strips supply and laying 25 mm x 2 point 5 mm , earthing pits , sitc street light pole , sitc flp street light , sitc flp juction box for light , sitc double arm for street light , civil foundation , foundation bolt set for light pole , cable route and joint markers , sitc flp emergency light 45 w , sitc non flp emgency light , sup point earthing cable 1c x 6 sqmm , sup point earthing cable 1c x 10 sqmm , ms structure steel , supply and lay b class gi pipe for cable protection , sitc 4 way junction box , cable tray 100mm x 50mm gi supply , cable tray 50mm x 25mm gi supply , cable clamps , flp blind plug 3 by 4 inch , preparation of earthpit and cable route drawing

CTN :45514784

18 Jun, 2026 31.59 Lacs

Chandrapur - Maharashtra

Tender For providing and erecting 3000 litre plastic syntex with ms stand at various places in cmc, chandrapur

CTN :44993428

15 Jun, 2026 7.15 Lacs

Rampur-Up - Uttar Pradesh

Tender For bid to ras supply of fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani rampur, uttar pradesh , interconnecting earth electrodes with providing, fabrication and fixing of 50mmx3mm copper strip at akashvani rampur, uttar pradesh , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air rampur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani rampur. , providing and fixing of nomenclature sign marker for earth pits at akashvani rampur, uttar pradesh , digging of trenches of size 450mmx600mm total length 118mtr for 185 sq mm 3.5core and starting from electricity board energy meter to lt panel inside room and to respectively by digging the path , providing and grouting of 2 nos. of 3inch dia g.i pipes of different length on the cement concrete flooring and along the vertical walls. total length of both pipes is 27 mtr. , providing, grouting and fixing 2 nos. of 4inch dia g.i pipes along the ms stand of main mccb at energy meter. total length of both pipes is 14 mtr. , unwinding roll of 185 sq mm 3.5core al. cable from the cable drum and laying 2 length of this power cable through the trenches and through the gi pipes as laid down at akashvani rampur , reconstructing the cc flooring and repairing the area with cement concrete and stone aggregate mixer and finishing the surface, complete in all respect at akashvani rampur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod at akashvani rampur, uttar pradesh fabrication and construction of copper plate earthing details ) /bid number : gem/2026/b/7445375 * /dated: 24-04-2026 & & / bid document 1 / 22

Ms Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector