Ms Stud Tenders

Get complete information related to latest Ms Stud Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Stud Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Stud Tenders .

Filter

Loading....

Get Tender in Email

CTN :40427370

11 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of std self lock nut m10 , shim 0.5mm(ms-146) (plate no-g1-3-1 , sl no-20) , shim 1.5mm(ms-147)( plate no-g1-3-1 , sl no-21) , o ring , gasket( plate no- c1-16-1 , sl no-3) , grease nipple 1 by 8 inch bsp , str (os-678)) , spacer block(plate -b2-18-1) , tape reflective white(plate iv r-14) , tie cable(c1-14-1) , o ring 15.2idx5.30 cross dia , 10 amps fuse , seal(b4-1-1 by 05) , screw button head m6x30 (plate iii o) , washer , 6.86 by 6.73idx25.4 by 25.2odx1.6 thk , std self lock nut m12(ispl-sl-233) , screw m5x30 button head (plate iv l) , bonded washer seal , 1 by 2 inch bsp , bolt m10 x 55 (plate iii b) , washer plain , o ring oblique seal (ispl1207 & ctlg-e3-7-1 , sl-05) , washer 3 by 4 inch bsp(os-1053) , pin hose retainer(plate-b1-17-1) , nut nylon m8 (plate iv t) , bulb(plate-viii h-10) , luck nut gr-8 m8 , screw , gr-8.8m8x25 long , washer plain (plate iv f) , washer medium , 10.0 by 9.9id x 22.2 by 22.1od , hose clamp , nut lock 3 by 8 unf (plate i) , screw (plate iii c) , washer (plate iv m) , capscrew m5 (plate x j) , o ring , bush (item no-309) , shim , std plain nut , plug blanking cap (plate vi c) , nut lock m5 (plate viii a) , washer , stud (plate xvii a) , spring comprassion t by c press main (f5-1-1) , bolt (g1-1-10) , clevis pin , bolt m6x 16 flange reduced hex (plate xxviii a) , bolt m10x80(plate-iii g-3) , screw cap (item no-1750) , setscrew mx10 20mm (plate iii d) , 20 amp fuse(plate- ix e-7) , grommet (plate-d2-1-4) , washer thrust 3.5 mm thick phosphated (plate-f5-3- , nut (a1-1-15) , reflector reflex white(plate iv r-13) , 15 amp fuse(plate-ix e-8) , spring extension (plate xxv a) , spacer , bolt plough 3 by 4 inch unfx23 by 4 inch bs311 type-9(sl-60) , bolt(ispl sl-502) , o ring 274 idx3.5 cross sec dia , bulb(plate-viii h-11) , spacer , rivet nut m10 , bolt(plate xxxi c) , seal ring turquoise , spacer(item no-562) , wheel nut , strap , worm drive clip 70mm long by clip jubilee , lock cover door lh (plate iv n) , liner bearing , relay charge over , gaiter excavator lever , bearing(plate-d1-1-2) , pad wear 7mm upper colour blue , dump switch(plate-x h-2) , blanking plug(ispl h2-7-3) , radiator top hose(plate-xxviii b-14 ) , ring seal , bowl , wiper assy front(item no -955) , pin hinge cab door (item no-306) , switch oil temperature , hose 3 by 8bsp , 530mm long(plate-e1-2-1) , radiator bottom hose(jcb super xxvii b-17) , bearing linner( ms-20) , seal , brake piston (f2-1-30) , mirror rear view(plate-xxxiii) , cover pre cleaner (plate-xxvi b) , friction plate(f5-3-40) , brake piston seal(g1-2-1) , hinge door (item no-305) , tooth (plate-a2-1-1) , seal , strut gas door(plate-iv j-1) , bearing linner , tail lamp right side(item no-907) , tail lamp left side(item no-906) , glass right side quarter light(sl-378) , element suction(jcb 3dx plate b1-2-1 sl no 4) , door seal right hand (jcb super page 95) , filter(94mm) jcb syncro shuttle (ctlg 3dx e3-8-2) , glass left side quarter light , hose 08 bsp hp 545 mm lvb to wa feed pipes(item no , hose 3 by 8 bsp , 1000(item no-1159) , liner bearing , filter element , side cutter double flange , cleaner active wiper(iv r-12 , 383) , pin pivot(plate-a1-7-2) , seal window left hand side (plate iv p) , hose , hose 10 bsp hp 560 mm lvb to wa feed pipes(item no , ignition switch , bucket dipper pivot pin(plate-vi s-1) , hose 10 bsp lp 950 mm (item no- 1158) , cable parking brake , side cutter double flange , hose , 3 by 8 inch bsp x 800long str-str , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , element air safety(p3-3-2) air filter inner , leaver tipping (plate-vi t-1) , door handle lh(plate -iv n-9) , hose assy suction(item no - 1202) , hose 06 bsp hp 1910 mma(item no-1161) , hose 10 bsp hp 700 mm(item no-1157) , fan face level 12v (c1-17-1) , adhesive(iv , r-10) , throttle cable assembly (jcb super plate xi a) , light hand lamp 12v , bush , door seal left hand (item no-323) , element air main(plate-p3-3-2) , door tint

CTN :40355689

02 Jun, 2025 NA

Doiwala - Uttarakhand

Tender For hardware - hardware item, good quality nyloc nut as per standard specifications size 1/2" bsw, good quality nyloc nut as per standard specifications size 30mm, good quality nyloc nut as per stanadard specifications size 32mm, m.s. washer plain 3 mm thick a) size 1 /4 to 3/8 , m.s. washer plain 3 mm thick b) size to above, supply of accurate/a-1/ isi make m.s. bolt wilth nut size to 3/8 (full thread ), supply of accurate/a-1/ isi make m.s. bolt wilth nut size to above (full thread ), supply of accurate/a-1/ isi make m.s. bolt with nut size to 3/8 (half thread ), supply of accurate/a-1/ isi make m.s. bolt wilth nut size to above (half thread ), supply of accurate/a-1/ isi make m.s. bolt size 1/4" to 3/8" (full thread), supply of accurate/a-1/ isi make m.s. bolt size 1/2" to above (full thread), supply of accurate/a-1/ isi make m.s. bolt size 1/4" x 3/8" (half thread), supply of accurate/a-1/ isi make m.s. bolt size to above (half thread ), supply of accurate/a-1/ isi make m.s. nut size to 3/8 , supply of accurate/a-1/ isi make m.s. nut size to above, supply of accurate/a-1/ isi make m.s. bolt size 6 mm to 10 mm, supply of accurate/a-1/ isi make m.s. nut size 6 mm to 12mm, supply of accurate/a-1/ isi make m.s. nut size 12mm to above, m.s hexagonal nut size 3mm, m.s hexagonal nut size 3 mm, forged steel wire rope grip a) for 10 mm dia wire rope, forged steel wire rope grip b) for 20 mm dia wire rope, forged steel wire rope grip c) size 28 mm dia wire rope, summit make grease cup, aligator no.27, aligator no.35, aligator no.45, u clamp a) size 1 /2 , u clamp b) size 5/8 , u clamp c) size 3 /4 , hose clip for pipe a) 10 mm nb, hose clip for pipe b) 20 mm nb, hose clip for pipe c) 25 mm nb, hose clip for pipe d) 32 mm nb, hose clip for pipe e) 40 mm nb, hose clip for pipe f) 50 mm nb, hose clip for pipe g) 65 mm nb, counter shunk m.s. bolt full thread in mm size size 20 x 35 mm, counter shunk m.s. bolt full thread in mm size size 32 x150 mm, counter shunk m.s. bolt full thread bsw thread size 3/8 x 3 /4 , counter shunk m.s. bolt full thread bsw thread size 3/8 x 1 , counter shunk m.s. bolt full thread bsw thread size 3/8 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1.1/4 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 1 /2 x 2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 2.1/2 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 3 , counter shunk m.s. bolt full thread bsw thread size 5/8 x 4 , counter shunk m.s. bolt full thread bsw thread size 5/16 x 1 , counter shunk m.s. bolt full thread bsw thread size 3 /4 x 1.1/2 , counter shunk m.s. bolt full thread bsw thread size 3 /4 x 2 , counter shunk m.s. bolt full thread bsw threadsize 3 /4 x 2.1/2 , counter shunk m.s. bolt full thread bsw threadsize 3 /4 x 3 , counter shunk m.s. bolt full thread bsw thread size x 3.1/2 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 4 , counter shunk m.s. bolt full thread bsw threadsize 7/8 x 5 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 6 , counter shunk m.s. bolt full thread bsw thread size 7/8 x 7 , m.s. stud bsw thread a) size 1 /4 x 3/8 , m.s. stud bsw thread b) size 1/2" x above, cadmium bolt electroplating full thread with nut size 1 /2 x 5 , grinding wheel 100 nos. grain 8 x 1 x 1 , grinding wheel 60 nos. grain 8 x 1 x 1 , general discount on ss allen bolt aisi-304 quality (list to be attached without fail) discount will be allowed @_____% on the price list dated__________, general discount on stainless steel nut bolt ss-410 quality (list to be attached without fail) discount will be allowed @_____% on the price list dated__________, unbrako make high tensile bolt& nuts, allen bolt. discount on price list to be qu

Central Government/Public Sector

CTN :40345452

04 Jun, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of bolts and nuts for dewatering and csr - ms stud with2 nuts, full threaded , good quality with standard size , ms stud with2 nuts, full threaded , good quality with standard , ht hex hd.bolt with nut , ht hex bolt with nut , ms hex head bolt full threaded with nut and one washer , ms hex head bolt and nut, full threaded and one washer

corporations/Associations/Others

CTN :40290828

07 Jun, 2025 16.61 Lacs

Puruliya - West Bengal

Tender For procurement of different types ms fasteners for bcm pws ahp chp tg esp of rtps - bolt with bush and nut material gi ,size-m 8 x 70 , ms bolt with heavy hex nut and washer,m5x20, grade-4.6 or higher, full thread , plain washer ms m16 mm xth2mm , hex. head bolt with nut and washer size m 10 x 50 mm material ms full thread , ms bolt full thread with nut m20x70 mm , hex. head bolt with nut and washer size m 16 x 65 mm material ms full thread , bolt m.s. hex head , size m 16x45 mm , bolt nut and washer,ms,hexagonal head,size-20x50. , hex. nut size m 10 mm material ms , plain washer ms a22 as per is2016, size- id-22mm,od-60mm,t-04mm , ms hex bolt with nut, size-m12x65,full thread,grade 4.6 is 1364 , stud special with nut and washer size m 16 x 45 mm material ms , m.s. hexagonal bolts with nut m12x50 , hexagonal head bolts, nuts and washers, material m.s., make hrs , size m 12x45 mm , hex. nut size m 12 mm material ms , m s hex bolt nut andwasher 12x75mm , ms hex bolt with nut, size-m12x30,full thread,grade 4.6 is 1364 , washer, size 18x50x3 mm material ms , hex. head bolt with nut and washer size m 8 x 40 mm material ms full thread , stud special with 2 nuts size m 16 x 60 mm material ms , ms bolt and nut sizem 16x70 long grade 4.6 is 1364 , ms bolt and nut sizem 16x90 long grade 4.6 is 1364 , hex head bolt, nut and washer, is 1364 m.s. make- hrs agrawal iswp, size m 16x90 ft ,hex. head bolt with nut and washer size m 16 x 90 mm material ms full thread , ms bolt and nut sizem 12x70 long grade 4.6 is 1364 , ms bolt with nut m12 x 100with standard thread , nut ms grade 4.6 is 1364 , size m16 , ms plain washer,sizem12 , m6 x 50 mm m s nut and bolt gr-4.6 , m 24 x 100 mm m s nut and bolt gr-4.6 , ms hex bolt nut andwasher-16x50mm , m 8 x 50 mm m s nut and bolt gr4.6 , m 16 x 100 mm m s nut and bolt gr-4.6 , m 10 x 50 mm m s nut and bolt gr-4.6 , m 16 x 80 mm m s nut and bolt gr-4.6 , m 16 x 180 mm m s nut and bolt gr-4.6 , m 22 x 70 mm m s nut and bolt gr-4.6 , m 10 x 75 mm m s nut and bolt gr-4.6 , m 20 x 110 mm m s nut and bolt gr-4.6 , m 20 x 80 mm m s nut and bolt gr-4.6 , m 12 x 50 mm m s nut and bolt gr-4.6 , ms stud bolt with both end threads of 100 mm, with two nuts and washers,total lengthequal610 mm. , m 18 x 100 mm m s nut and bolt gr-4.6 , m s stud bolt, size m 16 x 220 , ms bolt with nut is-1363-is4218 gr-4.6 csk size-m20x140 , hex head ms bolts with nuts and fitted with two nos. plain washer, , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nuts, thread profil , m 3 4 inchx 4 inch m s nut and bolt gr-4.6 , m 5 8 inchx 2 inch m s nut and bolt gr-4.6 , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nuts, thrcificatiw , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with n63 199 , m 20 x 60 mm m s nut and bolt gr-4.6 , hex head ms bolts with nuts and fitted with two nos. plain washer,is 1363 bolts with nuts, - iii sizem 20 x 180 mm , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nuts, thread 7on as perw , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nuts, thread pro.6 of is x 75 mm , hex head ms bolts with nuts and fitted with two nos. plain washer, is 136367 pabsw , m 8 x 25 mm m s nut and bolt gr-4.6 , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with ntion as per is 1363 1995 size m 14 x 80 mm , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nuts, threaentional , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with 1363 1995 sizem 16 x 120 mm , hex head ms bolts with nuts and fitted with two nos. plain washer, is 1363 bolts with nut363 1995, size m 3 4 inchx 3 inchbsw , ms hex bolt with nut,size m12x75,full thread,grade 4.6 is 1364 , ms stud with two heavy nuts,m27x260 grade-4.6 or higher, standard thread 600mw , ms hex bolt nu

Co-operative

CTN :40232683

17 May, 2025 NA

Farrukhabad - Uttar Pradesh

Tender For supply of hardware - item, hacksaw blade "miranda make"- 1/2"x 12" low alloy, hose clamp klinco make- 1/2", hose clamp klinco make- 3/4", hose clamp klinco make- 1", hose clamp klinco make- 5/8", hose clamp klinco make- 1.25", emery tape rough john o.k./carborandum size 2" (50 mtr.), emery tape fine john o.k./carborandum size 2" (50 mtr.), split pin neddle fold 3/16" x 1.5" - 100 pcs. packing, split pin champion make 1/4" x 2" - 100 pcs. pack, do 5/32"x 2", do 1/4"x 2.5", do 1/16"x 1.5", do 1/8"x 2", do 3/16"x 1.5", do 3/16"x 2", spring washer ( all size) bbbb - 100 pcs.(as per price list), d-cycle size -1/2", do size 5/8", do size 3/4", red lead dewaldi make, white lead sakura - 1001, belt fastner bolt - 3/8" x 1.5", do 1/2"x 1.5", do 1/2"x 2", manila rope with test certificate gor make- size- 1/2", manila rope with test certificate gor make- size-3/4", steel wire rope 6/19 construction hempcore " usha martin" make with test certificate size- 3/4" (19 mm), brasso 100 ml pack, rustolene 500 ml. pack, graphite powder 500 gm. pack, counter shank bolt size 5/8" x 2.0", counter shank bolt size- 5/8"x 2.5", do 3/4"x 3", do 3/4"x 4", do 3/4"x 5", hexa blade frame 12", cotton waste best quality - white, cotton waste best quality - coloured, 100% synthetic rubber sheet " jyoti make" - 1/8", do 1/4", do 1/2", m.s. round bar (all size), en-8 round (all size), s.s. round (all size) ( grade-410), copper round all size, m.s. snap head rivit (all size), grinding wheel corbondum (all type & all size), flap disc all type & all size., flate belt dunlop/good year (all type & all size), plumber block smr make (all type & all size), m-seal mahendra & mahendra/pidilite, taflon tape 3/4", taflon tape 1/2", alluminium rivit all size, m.s. socket size 3/8", do 1/2", do 3/4", do 1.5", do 1", do 1/4", shallack compound( 25 grm. pack), holdtite compound (500 ml. pack), complete tyre coupling unique hpt -114, do - 116, do - 126, do - 140, do - 160, do - 178, do - 190, do - 220, do - 220, bearing retainer ( 50 ml. pack), boiler gauge glass - 3/4" x 14", boiler gauge glass - 3/4" x 16", boiler gauge glass sleeve - 3/4" x 16", rubber cone washer 3/4", do - 1.25", do - 1", emery paste - fine ( 400 grm pack ), emery paste - rough ( 400 grm pack ), break liner 3/8" x 8", do 1/2"x 8", do 1/2"x 9", emery paper/cloth rough, emery paper/clothfine, plain sight glass 6.25" x 1/2", do 8"x 1/2", do 4"x 1/2", do 3"x 1/2", namda - 1/2", sling wire size - 3/4" ,hook 16, 6 mtr. length, do 1/2" ,hook 16, 2 mtr. length, do 3/4" ,hook 16, 6.5 mtr. length, high pressure metallic rubber hose pipe dunlop make size-3/4", do size- 1", klinger make boiler gauge glass with asbestos gasket size a-7, do size h-7, mica sheet for above gauge glass, wire breaded hydraulic hose pipe both side connector 3/8" x 7 , do 3/4" x 7, do 1/2" x 7, mycoda make oil seal all size (as per price list ), railywolf make angle grinder - 5", do 4", do 7", spring steel 6 mm thick x 45 mm wide, sling wire size - 1/2" x 2mtr., do 3/4" x 2 mtr., do 3/4" x 3 mtr., do 1/2" x 3 mtr, jaw bore -12, do 3/4" x 3 mtr, jaw bore -12, nylock nut 7/8", do 1", do 3/4", do 1/2", do 5/8", brass nut(b.s.p. thread) all size, m.s. stud 14 mm x 50 mm, do 12 mm x 50 mm, do 12 mm x 75 mm, m.s. stud 10 mm x 50 mm, do 10 mm x 75 mm, do 16 mm x 65 mm, do 16 mm x 75 mm, do 12 mm x 65 mm, do 8 mm x 50 mm, do 18mm x 175 mm, metallic oil seal 25043 as per sample, wire breaded hose pipe 3/4", sapre tyre hpt-114, do hpt-116, do hpt-126, do hpt-140, do hpt-160, do hpt-178, do hpt-190, do hpt-220, do hpt-222, do hpt-292, u-clamp 5/8", do 1/2", do 3/4", m.s. washer all type, hand wire brush, tube expender with wrichit - 42 mm, tube expender with wrichit - 96 mm, nozzle for gas cutter 3/64 ( three stage ), do 1/16 ( three stage ), do 5/64 ( three stage ), holder for welding purpose 1000 amp., oxygen regulator ( two stage ), l.p. regulator, oxygen cylinder key, hand gloves for welding purpose, hand screen for welding purpos

Loading, Please wait...

Ms Stud Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Co-operative