Latest ms tube Tenders | Government ms tube Tenders

Central Government/Public Sector

CTN :45557192

15 Jul, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of set of spares for pantograph type iro3h. set consists of 7 items. 1) cho1360 lock washer- 02 nos. 2) ch0600 min spring assembly - 02 nos. 3) ch01000 - steady tube complete - 01 no. 4) ch01500 upper articulation assembly - 01 no. 5) ch0920 pin for upper articulation - 03 nos. 6) ch015230 oil seal 1044 - 02 nos. 7) ch015270 circlip b47 - 01 no. of m/s contransys [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Corporations And Associations And Others

CTN :45722307

06 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For tender for (i) construction of tubewell with ms tubewell assembly size 300x200 mm dia size with required all tubewell accessories (ii) supply of pea gravel and develop-ment of tubewell and related works (iii) supply, installation, testing and commissioning of pumping plant with all related accessories at ward no-2 tw npp rampur under deposite programme." is invited by u.p. jal nigam (urban)

Central Government/Public Sector

CTN :45698508

27 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply, installation and commissioning of electrically operated set of wind screen wiper assembly complete with wiper motor, wiper arm with blade & pipe connections & water spray wind screen washing system including connections/tube & fittings completefor 3 phase locomotives as per plw's frs no. plw/ldo/loco/e wiper-002 rev. 0 to drawing no. 1209-08.130-511, alt. 1, drawing no. 1209-08.130 263 alt. 3 and drawing no. 1209-08.130-019 alt. 1. note: scope of supply as per clause 3 of plw's frs no. plw/ldo/loco/e wiper-002 rev.0. [warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] [ rate of supply 11 units per month , commencement time allowed -2 month ]

Central Government/Public Sector

CTN :45731653

07 Jul, 2026 NA

Multi City - Multi State

Tender For supply of miniature micro switch with base plate for wc indication latch as per dy.cee(w)/pl's drg. no.ac-1924. (1):- material: a). base plate 1 mm thickstainless steel-a 316 as peris:6911-1992, b). aluminium block-10x10x35 mm long, c). use suitable size pan headed ss screw to fix aluminium block and micro switch. d). ms tube 11 mm long o/d-6 mm, i/d-4 mm. (2):-micro switch normally open type 10 amps, 125/250 volts a.c. make:- kaycee/siemens/l&t/salzer. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45728413

06 Jul, 2026 NA

Kheda - Gujarat

Tender For auction sale of scrap alternator/ starter motor,scrap ac compressor,scrap motor (blower+radiator fan+wiper),radiator and condenser scrap with attached al pipe,e-waste with speaker,scrap - tyres with rim,scrap - tube,scrap nut & bolt,scrap - defaced engine (4w-steel 80%),scrap - defaced engine (cv),mix steel with chassis scrap,scrap steering column,steering rack,front shocker with spring & rear shockers,empty catcon,bale body (bundle),doors assembly and trunk lid assembly,scrap - plastic (bumper + black pp+hd+dashboard+acralic),scrap - rubber(pcb_ catagory)

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

Central Government/Public Sector

CTN :45722131

09 Jul, 2026 19.76 Lacs

Bokaro - Jharkhand

Tender For supply of thermocouple c c - thermocouple assembly,type k,il 2000mm , surface t c assy,type k,055 mech 0122 , thermocouple assy,type k,il 1000 mm , thermocouple assembly,type k,il 800mm , thermocouple assembly,type k,il 1250mm , n type thermocouple,inconnel600,il 750mm , n type thermocouple assy,055.mech.0518 , k type mi thermocouple,lg 152mm,dia 6mm , k type mi thermocouple,lg 117mm,dia 6mm , k type mi t c,l 275mm,055.elect.0792 , k type mi t c f periphery,055.mech.0526 , k type mi t c f stack zone,055.mech.0526 , k type mi base t c,od 6mm,055.mech.0535 , k type mi thermocouple,dia 6mm,lg 825mm , k type thermocouplesimplex,length 1200mm , k type thermocouple,simplex,length 1600m , k type thermocouple assy,length 1000mm , mineral insulated thermocouple,lg 3500mm , mineral insulated thermocouple,lg 6100mm , alumina ceramic beads,od 12.7 13.2mm , ceramic protection sheath tube , inconnel pipe 600 f thermocouple, 1100mm , inconnel pipe 600 for t c, length 1900mm , metallic t c head with ceramic,m30x1.25 , metallic t c head with ceramic, m20x1.75 , heat proof s type compensating cable,2 c * /bid number : gem/2026/b/7717132 + /dated: 29-06-2026 ' ' / bid document 1 / 32

Central Government And Public Sector

CTN :45715503

20 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of 1. cover frame end, part no. 37128089 of ingersoll rand make 15t2 compressor , 2. woodruff key, part no. 95083721 of ingersoll rand make 15t2 compressor , 3. pilot valve, part no. 37113701 of ingersoll rand make 15t2 compressor , 4. connecting rod, part no. 32003659 of ingersoll rand make 15t2 compressor , 5. connecting rod, part no. 32003642 of ingersoll rand make 15t2 compressor , 6. crankpin bush, part no. 32295875 of ingersoll rand make 15t2 compressor , 7. tube assembly of 2nd stage- intercooler, part no. 37131083 of ingersoll rand make 15t2 compressor , 8. elbow, tube - 5-16 x 1-4, part no. 95110441 of ingersoll rand make 15t2 compressor , 9. connector, male 5-16 x 1-4 inch, part no. 95082491 of ingersoll rand make 15t2 compressor , 10. dowel, part no. 37114030 of ingersoll rand make 15t2 compressor , 11. lock ring, 3rd stage, part no. 30288450 of ingersoll rand make 15t2 compressor , 12. set of piston ring 1.625 hp, 3rd stage, part no. 37138146 of ingersoll rand make 15t2 compressor , 13. set of piston ring 3 inch, 2nd stage, part no. 32194276 of ingersoll rand make 15t2 compressor , 14. set of piston ring 5.5 inch lp, 1st stage, part no. 32194144 of ingersoll rand make 15t2 compressor , 15. belleville washer- 5-8, 3rd stage, part no. 39092913 of ingersoll rand make 15t2 compressor , 16. belleville washer - 3-4 we, 1st stage, part no. 37092897 of ingersoll rand make 15t2 compressor , 17. tube assembly of 3rd stage- intercooler, part no. 37131109 of ingersoll rand make 15t2 compressor , 18. connector, tube 3-4 x 3-4, part no. 95083275 of ingersoll rand make 15t2 compressor , 19. safety valve - 60 psig, part no. 97048094 of ingersoll rand make 15t2 compressor , 20. safety valve - 260 psig, part no. 72062102 of ingersoll rand make 15t2 compressor , 21. finned tube assembly - 36 inch, part no. 32024697 of ingersoll rand make 15t2 compressor , 22. finned tube assembly - 38-3-4 inch, part no. 32025678 of ingersoll rand make 15t2 compressor , 23. finned tube assembly - 41 - 1-2 inch, part no. 32025686 of ingersoll rand make 15t2 compressor , 24. finned tube - 41 inch, part no. 30335459 of ingersoll rand make 15t2 compressor , 25. finned tube- 37 inch, part no. 30335442 of ingersoll rand make 15t2 compressor , 26. finned tube - a-c, part no. 32129004 of ingersoll rand make 15t2 compressor , 27. tube elbow 1-2x3-8, part no. 95040184 of ingersoll rand make 15t2 compressor , 28. connector tube, part no. 95083184 of ingersoll rand make 15t2 compressor , 29. crank pin cap assembly, part no. 30210272 of ingersoll rand make 15t2 compressor , 30. tune up kit with air filter, 34 items, part no. 37123759 of ingersoll rand make 15t2 compressor , 31. plug oil filter complete, part no. 30289003 of ingersoll rand make 15t2 compressor , 32. tube elbow 3-4x3-4, part no. 95031761 of ingersoll rand make 15t2 compressor , 33. connector male 3-8 x1-4 inch, part no. 95083143 of ingersoll rand make 15t2 compressor , 34. crank shaft assembly with bearing plus nut, part no. 70240933 of ingersoll rand make 15t2 compressor

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45737020

03 Aug, 2026 NA

Kanchrapara - West Bengal

Tender For supply of complete gear wheel and canon tube assembly (msu) (along with spare parts) as per icf drg. no.- dmu/dpc/ss-0-2-002, alt.- b/nil, col.- 1 & item no.- 3&4, and as per annexure attached. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Ms Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors