Latest ms washer Tenders | Government ms washer Tenders

CTN :40158618

03 Jun, 2025 NA

Ajmer - Rajasthan

Tender For corrigendum : tender for supply of sl ch hd scr m4x10 blackened - sl ch hd scr m4x10 blackened , sl ch hd scr m4x12 blackened , sl ch hd scr m5x10 blackened , spring washer m6 , hex nut size m6soft0 , hexegon nut m8 soft , hex soc hd scr m6x12 , hex soc hd cap screw m6x16 , sl ch hd scr m4x8 blk , sl ch hd scr m4x45 blk , sl ch hd scr m6x35 , hex nut m6 hard , sl ch hd scr m4x55 , hex nut m5 soft , machined washer 8 dot 4 , mc washer 13 , hard washer m8 , washer 50 washer 50 , washer m12 , spring washer b 8 , washer 32

corporations/Associations/Others

CTN :40512318

09 Jun, 2025 10.91 Lacs

Erode - Tamil Nadu

Tender For supply of various size ms bolt and nuts and ms washer 16mm

Central Government/Public Sector

CTN :40252815

31 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For bid to ras supply of fabrication and machined - jr. head liner clamp (hy-901.08.02) - as per drg. 26108802066/02 with matl as per specn. aa10119/15 , spring adjusting bolt (hy-039.00) - fully m/cd item as per drg. 36137600080/02 with matl as per sepcn. aa10208/07 , key (hy-167.01.18) fully m/cd key as per drg. 46148000505/03 with matl. as per specn. aa10208/07 , thrust washer (hy-167.01.27) - as per spec. a-821/02 with matl as per specn aa10208/07 , oil pump key (hy-10.02) - fully m/cd oil pump key as per drg. hy-10.02/00 with matl. en-9

Central Government And Public Sector

CTN :40097547

16 Jun, 2025 NA

Thane - Maharashtra

Tender For corrigendum : supply of end fittings (finish machined) as per taps-4/31120/2403/ddand specification pb/e/00040, r0 , end fitting flange forcoolant tube rolling, drawing no. taps-4/31120/2421/dd &pb/e/00040, r0 , ef spool-a, cs ring shrink fitting mockup,drawing no. taps-4/31120/2428/dd and ts no. pb/e/00040,, ef spool-b for cs ring shrink fitting mock-ups, drawing no.taps-4/31120/2428/dd & ts no. pb/e/00040 , ef spool-c forcs ring shrink fitting mock-ups, drawing no. taps4/31120/2428/dd & ts pb/e/00040, r0 , lattice tube for 16channel mock up as per drawing no. taps-3/31610/2507/ddand 2506/dd , lattice tube 100mm long from 241.25 mmdia end for weld qualification drg no. taps3/31610/2506&07/d , liner tube as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spacer (button) as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , linertube spool for rolling qualification as per drawing no. taps4/31120/2424/dd and specification , liner tube flange forrolling qualification-drawing no. taps-4/31120/2423/dd &ts no. pb/e/00040, r0 , journal ring, cal. side (tool steelaisi-d-2) drawing no. taps-4/31150/2401/dd & tspb/e/00042, r0 , journal ring, fm side as per drawing no.taps-4/31150/2401/dd and specification pb/e/00042, r0 ,bearing sleeve fm side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleevecal. side side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleeveretainer ring fm side for 16 ch mock up drg no. taps4/31120/2414/dd & pb/e/00043, r0 , bearing sleeveretainer ring cal. side for 16 ch. mock up drg no. taps4/31120/2414/d & pb/e/00043r0 , ef retaining ring as perdrawing no. taps-4/31120/2414/dd and specificationpb/e/00043, r0 , split sleeve assy. (cs- is: 2062gra, znplated) drg no. taps-4/31120/2413/dd & ts no.pb/e/00044, r0 , bellows attachment ring (cs-a519gr1025) drg no. taps-4/31120/2409/dd & ts no.pb/e/00045, r0 , ss seal ring in bellows 308l/321l as perdrawing no. taps-4/31120/2409/dd & ts no. pb/e/00045,r0 , yoke of position assy drg no. taps-4/31120/2407/ddand specification pb/e/00046, r0 , stud 17-4 ph m-30 x 2-6g as per drawing no. taps-4/31120/2408/dd andspecification pb/e/00047, r0 , unthreaded fixing block(part no. 2) ss-193 (yoke assembly) as per drawing no.taps-4/31120/2410/dd , unthreaded fixing block (part no.2a) ss-193 (yoke assembly) as per drawing no. taps4/31120/2410/dd , threaded block (part no. 3) as perdrawing no. taps-4/31120/2410/dd , threaded block (partno. 3a) as per drawing no. taps-4/31120/2410/dd , squarehead screw m-10 x 1.25-6g (850 x 4) as per drawing no.taps-4/31120/2410/dd , hex. main nut (850 x 2) as perdrawing no. taps-4/31120/2410/dd , hex. lock nut as perdrawing no. taps-4/31120/2410/dd , spring washer (b-10)as per drawing no. taps-4/31120/2410/dd , spring washer(b-30) as per drawing no. taps-4/31120/2410/dd , hex soc.headed cap sc. m4 x 0.7 x 8lg as per drawing no. taps4/31120/2410/dd , master gauge for dimension (l-27, c-4,l-30, b-10, c-8) as per ts no. pb/e/00040, r0 , workinggauges for dimension (l-27, c-4, l-30, b-19, c-8) as ts no.pb/e/00040, r0 , landed sleeve insert (ss-410) for ctrolling as per drawing no. taps-4/31610/2414/dd , cstsflanges (ss304l) for ct rolling as per drawing no. taps4/31610/2414/dd

State Government

CTN :40285135

05 Jun, 2025 1.77 Lacs

Bhopal - Madhya Pradesh

Tender For corrigendum : cgm/br/enquiry-17/ supply of various material - laying and jointing pvc pipe. heading, hydraulic hand trolley as per technical specifications, fire bucket with stand as per technical specifications, electric impact wrench as per technical specifications, ms washer 12 mm(25-100 kva) as per technical specifications

CTN :39706572

29 May, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras corrigendum : tender for supply of screw brass for wood csk hds 1 3 4 20g , screw cheese hd 1 4 bsw 1 1 2 long , bolts black steel hex hd 5 8 bsw 6 with nut , bolt steel 5 8 8 , nails steel spike die head flat points cut 50mm , hinge brass butt 25mm , pin drop n.b.for guard stanchions stay , bolt 14 50mm pitch 2mm , bolt steel 14 90mm , hinge steel 60mm , hinges brass double action spring 100mm , washer copper , galvanometer iron padlock 75mm , washer spring s coil5 16 n size 8mm id 8 2mm od 14 2mm , gasket spiral wound , packing hemp , moulder rubber lip picgs , ms washer flat rd size 3 8 id 7 16 od 7 8 thk 0 064 , gasket spiralwound metallic sbestos size1 5 16 d 1 15 16 e , nail sw/rd 45mm 2 5mm , valve grinding paste coarse , gasket spiral wound metallic asbestos 1 4 1 2 7 8 ed 1 8 , bolts blacks steel hex hd 5 8 bsw 2 3 4 with nut , bolts black steel hex hd m22 75mm with nut , bolt hex hd m6 35 mm long , washer spring steel 3 8 0 590 od 0 092 thick square cross-s , nut hex 16mm , nail steel rose hd fine flat 50mm , bushing rubber 1 unt type k 180 360 kgs soft , gasket spiralwound metallic asbestos size 13 16 id 1 5 1 ed , bolts black steel hex hd m14 75mm with nut , nut hex 5 8 bsf carbon molybdenum copper plated , padlock 4 lever 2 brass , gasket asbestos steam&water drum 406 4 304 8 20 6 4 8mm , nail steel 1 25 12mm , nut plain naval brass 3 16 bsw hex

CTN :40228065

17 Jun, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of valves stern gland - agt ring , tab washer dn20 stainless steel , straight-flow ball valve3-4 g female thread with hand lever. , o-ring 36.00x3 64c8 , spare seals kit for wafer valve dn20 , spare seals kit for wafer valve dn40 , spare seals kit for wafer valve dn50 , split ring , split ring , port grind surface valve flow regulator , hydraulic block flow regulator , carbon holder ring , key for polished surface , braid retaining washer , retaining ring of the toothed wheel , spring , nordlock washer dn14 , o-ring 11.2x1.8 20a8 , o-ring 45x3.55 20a8 , o-ring 85x3.55 20a8 , o-ring 100x3.55 20a8 , seating washer , ap hoisting-lowering control solenoid valve , lock tab washer nd16 , nut hhm20 , seal enercap hp , seal enercap hp , seal enercap hp , epoxy glue , electric actuator , electric actuator , grease nipple m10-1 , locking wire , ext. snap ring 15.7x1 steel , clear heat shrink , ring im 30-35-20 p , ring im 35-40-20.4 , chromated nut h m 16 cl8 , copper seal 27 , 3x32x1 , 5 , lattyflon braid 4757 18x18 , lattyflon braid 4789 18x18 , spring , connecting stud rod , rectangular brake tab , lockwasher , valve seal , o-ring 345.00x6.50 20a8 , radial roller bearing nu 1016 m , pneumatic electrodistributor , lock tab washer , serrated lock washer external teeth 8 , copper seal 14x18 , 5x1 , 5 , serrated lock washer external teeth 12 , o-ring 34 , 6x2 , 4x39 , 4 , o-ring 16x3x22-nbr-90 sh , o-ring 30x3x36 , magnetic level switch , cover seal , piston seal , spring , hydraulic block nonreturn valve , pilot non return valve , combined bearing rax435 , nut hfr m14 dax2 , nord lock washer m10 , nord-lock washer nd8 steel , internal valve grinding electrodistributor , 4w/3p hydraulic electrodistri butor , o-ring 355x5.3 20a8 , o-ring 493.00x7.00 20a8 , o-ring 530.00x7.00 20a8 , o-ring 6.00x1.80-20a8 , o-ring 20a8 11.2x1.8 , o-ring 82.5x5.3 20a8 , high density hose , 1-4 flare female od 91 cm , 20mm fb (25mm rb) ball machined , lock wire , spring pin e8-30 (cut to 10 mm) stainless steel , nut h m8 cl8 , lock tab washer nd12 steel , grub screw with flat end hc m4x6 , o-ring 56.52x5.33 20a8 , o-ring 24.20x3.00 20a8 , o-ring 37.47x5.33 20a8 , o-ring 29.30x3.60 20a8 gn

CTN :40468839

14 Jun, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of aj ed 1510 05 086 engine pulley , aj ed 1510 05 093 bearing , aj ed 1510 05 089 clutch shaft , aj ed 1510 05 129 pressure plate , aj ed 1510 05 130 clutch plate , aj as 1510 03 051 spring , aj as 1510 03 050 spring plate , aj cw 1510 02 041 toggle block , aj ed 1510 02 080 v belt flywheel to engine , aj rs 1510 04 079 bearing , 4h 262 01 0 00 water pump pulley spa 2 , 4h 052 12 0 00 joint for delivery volute , 50 002 10 060 set bolt m10x 1 pt 5x 60 8 pt 8 , 4h 052 40 0 00 water pump sub assy , 50 002 10 070 set bolt m10x1 pt 5x70 8 pt 8 , 50 506 10 000 plain machined washer m10 , 4h 692 01 0 00 v belt xpa 1280 , aj ed 1510 05 131 release bearing clutch

Central Government/Public Sector

CTN :40473010

27 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of hardware items for fixing of brake device container complete. 1) hex hd screw m10 x 4 5 confirming to specification no:din-933,iso-4017,is:1364, part-2,1992,a2-70&is:1367(part-14)1984,ce and icf drawing no: lw36182,item-16,alt-b/nil,qty-16 nos/set. 2) machined washer a10.5 confirming to specifica tion no:din-125,iso-2016,1967,200hv,a2 to is:1367(part-14)1984,icf drawing no. lw:36182, item-19, alt-b/ nil, qty- 16nos/set. 3) nyloc nut m10 confirming to specification no:din-982,iso-7002,1991,a2-70 & is:136 7(part-14)1984,icf drawing no:lw:36182,item-21, alt-b/nil, qty-16nos/set, make: unbrako,tvs,tuff, dfl o nly, [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40485379

18 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of flat ms washer (is: 2062) in pair consisting of (1) ms flat washer- 1mm thick qty- 01 nos. (2) ms flat washer- 2mm thick qty- 01 nos. washer od 80mm x id 40mm tolerance +/- 5% allowed [ warra nty period: 30 months after the date of delivery ]

Ms Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector