Latest mud phuska Tenders | Government mud phuska Tenders

CTN :41970639

08 Oct, 2025 24.00 Lacs

Dehradun - Uttarakhand

Tender For purchase of sanitary goods - acid masala, adjustable spanner 10 inch, albow and mixer, albow steel tap(for o.t.), angle cock ", angle cock 2-in-one, angle cock 3/4", angle cock double, bajri per quantal, ball cock, ball cock ", ball cock ", ball cock 1", bleaching powder, borewell submersible pump 3 phase 07 hp, borewell submersible pump 3 phase 10 hp, borewell submersible pump 3 phase 15 hp, brass tonty ", bricks 1st number per thousand, cemant black 50kg pack, cemant white 1kg pack, check nut 1", cistern ball cock plastic, cistern complete, cistern english sheet, cistern handle, cistern washer, clamp 1", clamp 1.5", clamp 3/4", cpvc cap 3/4", cpvc d joint 3", cpvc elbow 1", cpvc elbow 1/1/2", cpvc elbow 2", cpvc elbow 3", cpvc ft 1", cpvc ft 1.5 inch, cpvc ft 3/4", cpvc gatewall 1", cpvc gatewall 1.5", cpvc gatewall 3/4", cpvc mt 1", cpvc mt 1.5 ", cpvc mt 3/4", cpvc nipal 1", cpvc nipal 1/1/2", cpvc pipe 1", cpvc pipe 1/1/2", cpvc pipe 2", cpvc pipe 3", cpvc pipe 3/4", cpvc pipe 3/4", cpvc socket 1", cpvc socket 1/1/2", cpvc socket 2", cpvc socket 3", cpvc socket 3/4 inch, cpvc socket 3/4", cpvc t 1", cpvc t 1/1/2", cpvc t 2", cpvc t 3", cpvc t 3/4", cpvc tank nipal 3/4", cpvc union 1 inch, cpvc union 1", cpvc union 1/1/2", cpvc union 2", cpvc union 3/4", elbow ", elbow brush cpvc, elbow tap, farm fall ceiling 2x2 ft, fastener 4 inch, floor cleaner masala, g.i. gate valve ", g.i. gate valve ", g.i. gate valve 1", g.i. gate valve 2", g.i. pipe ", g.i. pipe ", g.i. pipe 1", g.i. pipe 2", gate wall, gi fall ceiling 2x2 ft, gi main hole cover with frame 12x12, gi main hole cover with frame 12x18, gi main hole cover with frame 24x18, gi main hole cover with frame 24x24, gi main hole cover with frame 24x30, gi main hole cover with frame 36x36, gift flower pot, gitty 1.5", gypsum screw 1.5 inch, hacksaw blade, hand jet, health foset, hexa blade, hexa frame, iron huk per kg., iron tonty ", jet, jet for cistern, jet for wall, latrin sheet cover western, looking mirror 12x18, looking mirror 24x18, m seal, mixcher, mosquito net, naini tray, nippal ", nrv 1.5, nrv brass 1/2, nrv brass 3/4, p.v.c elbow 1", p.v.c elbow 2", p.v.c elbow 4", p.v.c gate wall 1", p.v.c gate wall 2", p.v.c gate wall 4", p.v.c lotion tube, p.v.c pipe 1", p.v.c pipe 2", p.v.c socket 1", p.v.c socket 2", p.v.c socket 4", p.v.c. pipe 4, phynl liquid, phynl masala, piller cock ", piller cock 3/4", pipe cpvc 1 inch, plastic gitty, plastic water tap, plug ", push cock tonty plastic ", pvc cistern, pvc conection 18, pvc conection 24, pvc connection pipe 3ft, pvc connection pipe 4ft, pvc elbow 6 inch, pvc pipe 4 inch, pvc pipe 6 inch, rinch 12", rinch 14", rinch 18", rubber pipe ", rubber pipe ", rubber pipe ", sand per quantal, screwdriver big size, shawl, sheet cover letring, sheet long band, short body tonty heavy, shower, simline, sink jaali, sink jali big, soap case (steel), socket ", socket 6 inch, socket brush cpvc, sol band, soot dhaaga, spandle 1no., spandle 2no., ss cancel stop cock 1/2, ss mixture with tap, steel jali 04, steel jet, steel jet, steel stand for soap dish, steel towel rod, stop cock 1/2, stop cock 3/4, submersible pump 5 hp, t ", t ", t 1", t brush cpvc, tank 1000 ltr, tank 1000 ltr, tank 2000 ltr, tank 500 ltr, tank 5000 ltr, tank nipple, tap big long handle, teflon tape, thread, tissue holder, toilet sheet indian with foot step, toilet sheet western, tonty long body (steel), tonty short body (steel), towel stand 3 round, union ", union ", union 1", urinal pipe 1", urinal pot, wash basin big, wash basin jaali, wash basin jali, wash basin mixer (tonty) heavy, wash basin small, washbasin, washbasin jali, washbasin mixture, washer for cistern, washer for spindle, waste pipe ", waste pipe urinal, water motor 1 hp, water motor 2 hp, water motor 5 hp, water tank 500 ltr., western sheet, wrinch 14 inch, wrinch 16 inch, wrinch 24 inch

State Government

CTN :42021063

11 Oct, 2025 NA

Mandla - Madhya Pradesh

Tender For supply of bricks sand,muram,metal 20 and 40 mm and other item as per tender notice

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

CTN :42123978

27 Oct, 2025 NA

Ropar - Punjab

Tender For 670/p-3/emp-13132 dt. 24.09.2025 for sale of 8000 mt(metric tonne) of dry fly ash to small scale manufacturing units such as bricks, blocks ,tiles , pipes, fibre sheets, sintered or cold bonded ash aggregates from ggsstp,ropar

corporations/Associations/Others

CTN :42124681

08 Oct, 2025 60.00 Lacs

Ahmedabad - Gujarat

Tender For nirnaynagar, ranip, chandlodia, housing, nawawadj ghatal, kiranpark, sorabji compound area and gandhinagar tekra area in the west zone nawavadaj ward (1) on different tp roads and various lakes on the sidewalk. pain, cat eye, bolard and other genetic operations (2) supply of different machinery under maintenance operations, as well as supplying bricks, sand, grit, etc. at the maintenance store (3) demonstrate as well as other ways to be used as well as the maintenance of drainage water. work on hand -laying patchwork from various tp roads, villagers, housing area as well as other needy in the ward (4) patchwork as per requirement of various tp roads and other places. (capital work)