Latest mulsifire system Tenders | Government mulsifire system Tenders

corporations/Associations/Others

CTN :45260953

19 Jun, 2026 8.14 Lacs

Jaipur - Rajasthan

Tender For corrigendum : tender for supply of solar pv panel topcon - 15 kw , grid connected inverter/ power conditioning unit (pcu) alongwith built-in meter , module mounting structure (mms) , structure accessories , net meter and solar meter , array junction box , dcdb , acdb , string and jumper , earthing and cable , lighting arrestors , lighting protection system (lps) , surge protection device (spds)- surge arrestor , connectors , conduits and pipes. , dc cable for string and jumper , power cable from inverter to acdb , power cable for earthing - 15 kw , ac armored aluminum cable - 15 kw , installation , testing and commissioning - 15 kw , grid islanding protection as per nit , danger boards & signages as per nit , fire extinguishers as per nit

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

State Government

CTN :45481413

15 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For erection of dedicated fire water network / ring-main for fire protection of bunker, unit # 1 to 4 (210mw)

CTN :45498301

17 Jun, 2026 4.19 Lacs

Kurnool - Andhra Pradesh

Tender For vertical extension on existing g plus floor bharat ratna abdul kalam boys hostel building rcc framed structure from 5th to 9th floors completion of hostel rooms in all respect in 5th and 6th floors including water supply sanitary installations and drainage and construction of a fire escape lift with lobby from ground floor to 9th floor and providing iei and fans dbs ug cables earthing and lighting protection manual fire alarm system and fire extinguishers extension of firefighting with down comer system upgradation of manual fire alarm system upgradation of existing 13 passenger lift 16 passenger fire man lift 20 kva ups system cctv system lan networking system and solar hot water system etc in indian institute of information technology design and manufacturing iiitdm kurnool campus at jagannatha gattu hill dinnedevarapadu kurnool district andhra pradeshsubwork/packages:providing additional light or fan or call bell points power points wall mount fans replacement of ups batteries installations of ac unit in the office of ee c cpwd at iiitdm campus kurnool

Central Government/Public Sector

CTN :45488083

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of scrap released materials such as: (1) smps ips dcdp (r), qty=02 nos. (2) smps ips smrs (r), qty=03 nos. (3) ufsbi (r), qty=10 nos. (4) data logger, qty=02 nos. (5) universal axle counter/reset box, qty=24 nos. (6) copper strip, qty=109.9 mtr. (7) ct box 20 pairs, qty=35 nos. (8) ct box 10 pairs, qty=10 nos. (9) eld, qty=03 nos. (10) track feed battery charger, qty=81 nos. (11) ct box 50 pairs, qty=01 no. (12) ips status monitoring panel, qty=03 nos. (13) ufsbi alarm panel presentive, qty=08 nos. (14) fire alarm panel, qty=05 nos. (15) lightning surge protection unit, qty=03 nos. (16) lpd spd box, qty=03 nos. (17) remote terminal unit, qty=02 nos. (18) stm cabinet, qty=04 nos. (19) autometic battery charger, qty=01 no. (20) filter unit, qty=08 nos. (21) track circuit choke type-b, qty=162 nos. (22) sm penal c double line, qty=04 nos. (23) fire extingusher, qty=04 nos. (24) vft transformer, qty=60 nos. (25) relay, qty=1337 nos. (26) ctr, qty=10 nos. (27) signal post (r), qty=35 nos. (28) location box half (r), qty=38 nos. (29) location box full (r), qty=130 nos. (30) relay rack, qty=21 nos. location:- released materials of rvnl lying near lthr station in ttipl campus(ssr), sse/sig/brwd, jharkhand.

CTN :45474479

22 Jun, 2026 24.82 Lacs

Kota - Rajasthan

Tender For supply of asco make solenoid valves and spare kits for unit 1 to 6 , ktps, kota for fy 2026–27. - asco make solenoid valve p.a. gen shut off for unit # 3,4& 5, cat no. ht8344b066mo.110/50(nema) , asco make solenoid valve p.a. gen shut off for unit # 6 , cat no. ht8344b066mo.240/50(nema) , asco make spare kit for p.a. gen shut off for unit # 3,4,5&6 cat no. a302730mo (ask for (ht)8344b66mo/68mo.ac) , asco make solenoid valve for rc air gate valve cat no. : wptht8344b052mo- 110v ac rc gate unit#5 , asco make solenoid valve for rc gate valve cat no. wptht8344b052mo-220/50 unit#6 , asco make solenoid valve purge air dampers unit#5 valve cat no. : wptht8344-044mo. 110/50 , asco make solenoid valve for purge air damper unit # 6 cat no. : wptht8344-044mo.240/50 , asco make solenoid valve acfor fire protection unit #5 &6 cat no. : wpt8320a184.240/50 , asco make solenoid valve greasing system of mills unit #6 cat no. : wpt8320a184.240/50 , asco make solenoid valve for burner corner valve, cat no. : ht8322b012vmb.110/50(nema dual) unit#1,2,3,4&5 , asco make solenoid valve burner corner valve for u#6 , cat no. : ht8322b012vmb.240/50(nema dual) , asco make spare kit for horv/hotv/lotv valve unit # 1, 2, 3, 4,5&6kit no. c316753v (ask for ht8322b012vmb.ac) , asco make spare kit for emergency damper unit # 5&6, part no. : wpc302743mo (ask for wp8344-044modc) , asco make solenoid valve for unit # 5 sb drain valve, cat no. : wpt8320a184.110/50 , asco make solenoid valve for unit # 6 sb drain valve, cat no. wpt8320a184.230/50 , asco make solenoid valve ignitor for unit # 1, 2, 3, 4, & 5,cat no. : wpthb8342c001mo.110/50 , asco make solenoid valve ignitor for unit # 6 cat no. : wpthb8342c001mo.240/50 asco make solenoid valve for bfp rec, cat no. wpt8320a172.220/dc , asco make solenoid valve for dust level, model no. 19201002-230v/50hz

Central Government/Public Sector

CTN :45275210

15 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For corrigendum : installation of fire protection system in acc unit 1 and 2 at pvunl, patratu.

State Government

CTN :45353121

04 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For erection of dedicated fire water network / ring-main for fire protection of bunker, unit # 1 to 4 (210mw), tps-khaperkheda including supply of the material

CTN :45186153

25 May, 2026 NA

Belpahar - Odisha

Tender For supply and installation of different items - supplying, placing and fixing of godrej make metal rectangular office table with 5 drawers storage, particle board table top material suitable for office of dimensions w x h x d (mm) 1365 x 735 x 680 of rectangular shaped with lock facility and as per direction of engineer-in-charge., supplying, placing and fixing of godrej or durian make l shaped help desk with a flat linear table top in maple with dark grey sides, with computer tray, computer trolley and 3 drawers of varying proportion with a central locking mechanism of size: table top: 1500'(l)x600'(w)x750(h), side unit: 900'(l)x450(w)x750(h), and as per direction of engineer-in-charge., supplying, placing and fixing of godrej make brawn 6- seater dining table set with tempered glass top of size 1349mm(l)x749mm(h)x800mm(w) of rectangular shaped with 6 m.s chairs of size 450mmx988mmx518mm with leather upholstery and cushion including cost of all materials and as per direction of engineer-in-charge., supplying, placing and fixing of godrej mingle conference table with av integration (10-seater) of frame material made of prelaminated twin particle board and table top material made of mdf board with dimensions of 3000mm x 740mm x 1150mm with termite and weather proof including cost of all materials and direction of engineer-in-charge., supplying, placing and fixing of 10 numbers godrej make sally mid back chair with wide back rest and arm rest, adjustable lumbar support, ergonomic seat cushion of dimension of 756mm(w) x 885mm to 985mm(h) x 756mm(d) with wheels and upholstery knitted fabric and glass filled polypropylene and as per direction of engineer-in-charge., supplying, placing and fixing of 43" 4k led smart tv of make lg/sony/samsung with gen5 ai processor 4k with ai brightness and 4k upscaling, magic remote, film maker mode, ai sound system, smart web os platform, with ott apps supported, allm, hgig mode and as per direction of engineer-in-charge., supplying, placing and installing and all other ancillary works for sitc of isi marked (is:2878) fire extinguisher, abc type capacity 6 kg. with all accessories. (ever safe/fire shield)., supplying and placing of nilkamal magic iron black plastic chair with arm rest stackable texture finish 1 seater of dimensions 570 (w) 607(d) 900 (h)and as per direction of engineer-in-charge., supplying, placing and installing nilkamal magna 15 personal locker of dimensions width (mm) 905, depth (mm) 400, height (mm) 1850, door made of 0.8 mm thick (22 gauge) powder coated crca sheet, body, back & shelves made of 0.6 mm thick (24 gauge) powder coated crca sheet, locking facility available with a duplicate key total 15 numbers of individual lockers, as per direction of engineer-in-charge., supplying, placing and installing regular steel (magnetic) whiteboard for office, home & school, lightweight aluminum frame, resin coated steel writing surface, alloy aluminum (6063-t6 frame), paper honeycomb core & virgin abs corners 3x4 feet, with alloy steel folding easel stand 5 feet for white board (can hold up to 3x4 feet whiteboards) with dimension 600d x 900w x 1500h mm as direction of engineer-in-charge., supplying, placing and installing kent r/o+uv standalone water purifier system (kent, model cristal plus), 11 l storage capacity, multiple purification by ro+uf+tds controller, uv led protection in storage tank and all other ancillary works., supplying, placing and installing white and gray godrej glass double door storwel almirah/ bookshelf of iron and glass material with brass levers lock, handles , standard grade enamel paint coating is oven dried under controlled temperature to avert damaging effects of scratch, accessible with 10 types of separate lockers, of dimensions 914 mm (w), 320 mm (d), 947 mm (h), and as per the direction of engineer-in-charge., supplying, placing and installing high quality engineered wood godrej make verve queen size bed of dimensions w x h x d (mm) 1584 x 88

CTN :45091143

28 May, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of 2 ton split air-conditioner of bee 5-star rating, with rated standard cooling capacity of minimum 6100 watt ( 2 ton), with the function of cooling only, with rotary compressor, inverter (variable speed) type, suitable for 230 v ac, 50 hz system, with 100% copper coil, eco friendly refrigerant, anti-freeze thermostat, with thermal protection for blower motor & condenser motor. conforming to bis specification no. is:1391 (part-2) 2023 & isi marked. bee 5-star rating must comply to ministry of power notification no. s.o. 2794(e) dated 16th july, 2024 & s.o. 3984(e) dated 28th august, 2025 or latest with minimumindian seasonal energy efficiency ratio of 5.6 or latest. refrigerant copper pipes (suction & return) of minimum 4-meter length each, nitrile rubber tube with density 55 kg/cubic meter or more, fire performance class 1, rate of burning class v-0, water vapour diffusion resistance factor (%u03bc) more than 12000, service temperature 10 to 105-degree c, surface flame spread class 1 & thickness of minimum ? inch, relevanttest certificates to be submitted. nitrile rubber tube shall be with suitable inner diameter to suit & to wrap the complete length of refrigerant copper pipe and aluminum foil lamination of 0.2 mm thick to cover entire length of the copper refrigerant pipes will be supplied along with each air-conditioner. the supply shall include one pair of outdoor ac machine stand(containing fasteners) and one pair of indoor and outdoor pcbfor each unit. make: any indian is approved make. [ warranty period: 12 months after the date of delivery ]

Mulsifire System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government