Latest nail clipping Tenders | Government nail clipping Tenders

Central Government/Public Sector

CTN :40964846

25 Jul, 2025 NA

Kanchipuram - Tamil Nadu

Tender For supply of anchor smart surface pilot buzzer door bell 8374 or equivalent make ofhavells/legrand as approved by engineer-in-charge , roma make cat- no 21554 10a bell push or equivalent make of havells/legrand as approved by engineer-in-charge , anchor roma classic 2 module 5 step fan regulator white or equivalent make of havells as approved by engineer in charge , anchor roma classic 1 module 4 step fan regulator white or equivalent make of havells as approved by engineer in charge , anchor 30238wh 3 module pvc plate or equivalent make ofhavells/legrand as approved by engineer-in-charge , anchor roma classic make 12 module modular cover plate of white colour , anchor roma classic make 2 module modular cover plate of white colour , anchor roma blank plate single pole 21598 or equivalent make of havells/legrand as approved by engineer-in-charge , anchor roma classic make 6 module modular cover plate of white colour , anchor roma classic make 8 module modular cover plate of white colour , anchor roma 6 module surface box or equivalent make of havells as approved by engineer in charge , havells make crabtree model 10 amp modular 10 amp socket , legrand make cat no 5 552 51 32a 440 volt 3 pole and earth industrial socket with top complete or equivalent make of havells/anchor as approved by engineer-in-charge , stanley make cat no. 10-143-s basic snap-off blade knife 18 mm for electrician or equivalent make of taparia as approvaed by engineer-in-charge , havells make mirror light 10w led 600mm or equivalent make of phillips/bajaj as approved by engineer-in-charge , havells 10w led batten 300mm or equivalent make of phillips/bajaj as approved by engineer-in-charge , arihant or equivalent make as approved by engineer-in-charge pvc cassing capping 20mm of length 03 mtr , arihant or equivalent make as approved by engineer-in-charge pvc cassing capping 25mm of length 03 mtr , 32a standard single phase 05hp motor starter of havells or equivalent make of standard/l&t as approved by engineer-in-charge , havells outrider 10 w rechargeable led hand torch lhextdpgen1k010 , steelgrip pvc eleectrical insulation tap 20mm wide 10mtr long in various colours of black red blue yellow , legrand make 10 amp single pole miniature circuit breaker 10ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 16 amp single pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 20 amp single pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 16 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 20 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make 40 amp douple pole miniature circuit breaker 25ka or equivalent make of havells/schinder as approved by engineer in charge , legrand make cat no 420 093 mccb 4 pole 63 amp rating 36ka or equivalent make of havells/schinder as approved by engineer-in-charge , c&s winbreak make 250a 4 pole 35ka module case circuit breaker or equivalent make of havells/legrand as approved by engineer incharge , taparia make hammer rcc drilling bit of size 6 mm or equivalent make of bosch/hilti as approved by engineer in charge , taparia make cat no-dbs-4 diamond blade of size 10mm or equivalent make of bosch/hilti as approved by engineer-in-charge , taparia 355 mm 14 inch/ dia 2-1/2 mm thickness cut-off wheel cowg 2bl4/ steel cutting blade , taparia 110 mm / dia 2-1/2 mmthickness cut-off wheel cowg 2bl4/ steel cutting blade , taparia make line tester cat no 815 has high qualityand cellulose acetate plastic handle fully insulated blade , hexa blade 12 inch width 25mm of taparia make cat no hbhc 1224 carbon steel all hard 24tpi , loop junction box clamp for fixing of street light etc , original

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

Central Government/Public Sector

CTN :40945087

28 Jul, 2025 NA

Dhanbad - Jharkhand

Tender For improvement of cutting in kbj section (km.6/16 to 7/10) by rcc retaining wall, wire netting, earth cutting and other ancillary works under aden/cpu.

Central Government/Public Sector

CTN :40910925

08 Jul, 2025 NA

Raigad - Maharashtra

Tender For tender for providing supply to pilot neem project - supply of dol starter 2hp, supply of dol starter 5hp, supply of bus bar box, supply of cable gland3/4, supply of lug and handwear, 4cx4 sqmm cable laying, 3/4 glanding and termination, testing/commisning, 3cx2.5 sqmm cable laying, installation of busbar, glanding and termination of 3cx2.5sqmm c, rcc road cutting, cable sadaling, earthing cable supply, earthing cable laying & termination incl

CTN :40673645

03 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of structural audit e e - identification of weak structural members , design of these structural members including certifying the load carrying , detailed methodology of structural rehabilitation , complete structural audit to be vettted by any iit nit govt engineering collage , visual observation identify and note the distress damages leakages , rebound hammer test to know the surface strength of the concrete , ultra pulse velocity test to evaluate the integrity of concrete , carbonation test to identity the depth of carbonatinon on concrete , half cell potential test to define the corrosion potential of rcc section , chemical analysis to find out the ph value of existing concrete members , chemical analysis to identify the chloride content ci , chemical analysis to identify the sulphate content so3 , core cutting and compression testing including reinforcement mapping , compile ndt report and analysis data collected to ascertain status , suggestion for remedial measures preparation and submission + /bid number : gem/2025/b/6265913 , /dated: 11-06-2025 ( ( / bid document 1 / 17

CTN :40840450

07 Jul, 2025 83.0 Thousand

Pulwama - Jammu And Kashmir

Tender For constt at masjid sharief ganie mohalla at samboora b - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil : 25m from cutting edge, disposal of earth with in 100 m lead from site of work complete job, dry random rubble masonary with hard stones in foundations and plinth with out bond stones .including carriage of stones for 5kms by mt, dumping stone on horizantal level including cost of stones and 5km carriage by mt, providing and laying of stone soling incl carriage for 5 kms by mt complete job, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size), p/l of rcc slab in 1:2:4 mix with 20 mm nominal size aggregates excl. cost of shuttering and reinforcement. slab dia (9.0)2, reinforcement for rcc works incl cutting bending, straightning, etc complete of approved brand and quality., 12mm cement plaster finished with a floating coat of neat cement of mix in 1 : 4, centering and shuttering incl strutting, propping, and removal of farmwork.soakage pit dia (5.0)2, carriage of sand for 10 km, carriage of agg for 10 km, add cost for pvc pipe fittings comp job incl. bends ,tees, junctions, add for providing / fixing of top lid of inspection chamber comp job., add cost of photograph and sign board etc.and other unforseen items to be paid as per actual

State Government

CTN :40878491

05 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : material purchasign for construction of one room zp psb and providing basic amanities at village kanhori tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing and laying cast in situ/ready mix cement concrete m-20 of trap /granite/quartzite/ gneiss metal for r.c.c.beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.complete, providing and fixing in position tmt-reinforcement of various diameters for t-fe-500 bar r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm lo 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

State Government

CTN :40881545

14 Jul, 2025 2.34 Crore

Mandi - Himachal Pradesh

Tender For construction of formation cutting 5/7 mtr. wide, dumping sites, retaining walls, breast walls, cross-drainage work km 0/0 to 2/510 and 19.75 mtr rcc box girder bridge at rd 0/975).

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

Nail Clipping Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government