Latest nanovoltmeter Tenders | Government nanovoltmeter Tenders

CTN :40633387

17 Jun, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

State Government

CTN :40706454

30 Jun, 2025 25.88 Lacs

Multi City - Karnataka

Tender For supply of transformer winding resistance meter, turns ratio meter with interface, digital high voltage insulation resistance tester and oil bdv test kit.

CTN :40329205

16 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of ht panel consisting of 12kv 18.4ka, 630a indoor type incoming microprocessor based vcb - 2 nos ct ratio 200/100/50/5, 12kv,18.4ka, 630a indoor type outgoing microprocessor based vcb - 4 nos & 12kv,18.4ka, 630a indoor type outgoing microprocessor based vcb - 01 as bus-coupler ct ratio - 200/100 /50/5 with all other accessories with complete set with ammeter, voltmeter, led indicator, energy meter, c t, pt, protective relay with suitable metallic enclosures and complete wiring to complete the job with 1000 a capacity cu bus-bar and with interlocking facilities. (the panel consists of 7 nos vcb) make - any indian make of is standard [ warranty period: 30 months after the date of delivery ]

CTN :40639840

28 Jun, 2025 NA

Multi City - Multi State

Tender For supply of 400 meter cinder track with sprinkler system , excavation up to 10 cm to 15 cm comma watering , application of weed chemical over the track , laying of 4inch broken bricks or 40 to 60mm hard stone and compaction , lay a layer of 8 cm red earth without any grass or weeds , filling of cinder clay mix with 1 ratio 3 which is 1 percent soil into 3 percent , both side raise border both inner and outer of 10 cm height into 5 cm width , providing and construction open storm water drain on 450 mtr , chuna line marking 50mm line 120cm wide total 8 lane , water motor monoblock submersible pump 2hp oblique hp , hydro cyclone filter 2 point 5 inch , disc filter , 75mm pvc 4 kg , service saddale 75 oblique 32 , 32mm pvc , brass nozzle , pvc tee 75mm , pvc end cap 75mm , 75mm elbow

Central Government/Public Sector

CTN :40613341

16 Jun, 2025 4.33 Lacs

Raigarh - Chhattisgarh

Tender For testing and calibration of different electrical equipment related to ht installation (vcb, transformers, starters, motors, protective relay etc.) at chhal ocm , secl, raigarh area . - item description, testing & calibration of protective relay ( idmt/overhead relay, elr, cdg, earth fault relay, no volt relay/master trip relay, under/over voltage relay), testing of 6 nos. 6.6 kv/230v, 25 kva, transformer, 1 no. 1250kva, 33kv/3.3kv transformer and 1 no. 315kva, 3.3kv/440v transformer, this includes magnetizing test, magnetic current test, vector group test, ir/pi test, ratio test, acidity test, as per latest cear field testnote: work also includes prepartion of test report etc., testing of 6.6 kv ht motor, this is include ir/pi test, inductance test asper latest cear flied test, test and calibration of 6.6 kv vacuum circuit breaker panel having 5 nos. panels received from j&k area at chhal ocm sub station and 2 no. field vacuum circuit breaker chhal ocm sub station, 1 no. sf6 circuit breaker dharam sub station, which includes ir test, contact resistance test, close open test, as per latest cear field test, ir/high voltage test of cables, testing & calibration of all other protective/measuring equipments (meggers, lux meter, high voltage detector, multimeter etc.) in mine & surfacenote: work also includes prepartion of sigle line daigram, mine plan, test report etc., test of 6.6 kv overhead lines, which includes ir test of conductor, and post , disc insulator ir test as per latest electricity rule, test of 6.6 kv ht starter panel, which includes ir test, contact resistance test, close open test, as per latest cear field test, total impact of gst for the purpose of ctc

Central Government/Public Sector

CTN :40541280

20 Jun, 2025 NA

Sundergarh - Odisha

Tender For supply of nanovoltmeter

Central Government And Public Sector

CTN :40522406

19 Jun, 2025 NA

Basohli - Jammu And Kashmir

Tender For purchase of transformer turns ratio meter

CTN :40529549

23 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of ht panel consisting of 12kv 18.4ka, 630a indoor type incoming microprocessor based vcb - 2 nos ct ratio 200/100/50/5, 12 kv, 18.4 ka, 630 amps indoor type outgoing microprocessor based vcb - 2 nos and 12kv 18.4ka, 630a indoor type incoming microprocessor based vcb - 1 no as bus-coupler ct ratio - 200/100/50/5 with all other accessories with complete set with ammeter, voltmeter, led indicator, energy meter, ct, pt, protective relay etc. with suitable metallic enclosures and complete wiring to complete the j ob with 1000a capacity cu bus-bar and with interlocking facilities. (the panel consist of 05 nos vcb). the c ost also includes for making cable ducting and rcc stab to cover the cable trenching as per site requireme nt. make - simens/abb ltd/ crompton greaves/andrew yule/ kirloskar/ pascal. [ warranty period: 30 mon ths after the date of delivery ]

Central Government / Public Sector

CTN :40529887

09 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For multifunction meter with user programmable ct/pt ratio 5a or 1a ct input for lv or hv networks,input volta ge 100-600 v l-l,auxiliary supply 12 - 60 v ac/dc ,display :high brightness 3 line 4 digits led, size:96x96 mm,flush mou nt type,accuracy class :1.0,measurement and display parameters : vaf, kw, kvar, kva,kwh, kvarh, kvah, pf , pa, mm, nc,thd,run hours and on hours similar to rishabh make model no:rish master 3430 / socomec diris a 40 suitable for mounting in switch board cabinet (sbc 2) of lhb power cars. rdso spec no. rdso/pe/spec/tl/0195-2019 (rev.0). makes: l&t, ae, socomec, rishabh, siemens, yokins, abb, schneider only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529948

27 Jun, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of wireless cardioid microphone.type: wireless, form factor: hand held, operatin g range: 20 meter, polar patern: cardioid, microphone transducer type: dynamic, freqency r esponse: 20-20,000hz, signal to noise ratio: 80db, electrical impedance: 5 ohm, sensitivity:-50 dbv/pa(3.15mv), led indicator: available, on/off switch: available, volume control: yes, audio connector type: xlr or 6.35mm jack. [ warranty period: 12 months after the date of delivery ]

Nanovoltmeter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector