Latest nbc suit Tenders | Government nbc suit Tenders

CTN :45469583

16 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - ---- custom bid for services - revalidation of fall arrestor at hpcl kanpur terminal- annual maintenance and revalidation of fall protection system installed at tlf gantry (16 lines), calibration shed (1 line), sealing tower (4 lines), ethanol u/l gantry (2 lines) and tw gantry, spur 1 (14 sections of 50 mtr each and tw gantry, spur 2 (14 sections of 50 mtr each). i. conduct a thorough inspection of the existing fall arrestor system and lifeline. ii. assess the current condition of all components, including harnesses, lanyards, anchors, and connectors. iii. identify any wear, damage, or defects that could compromise safety. iv. ensure the system complies with the latest safety standards and regulations (e.g., osha, ansi). v. verify that all components meet manufacturer specifications and industry requirements. vi. perform load testing on the lifeline and anchor points to verify their strength and reliability. vii. conduct a drop test to ensure the fall arrestor system functions correctly. viii. provide certification of revalidation, including test results and compliance documentation. ix. carry out necessary maintenance, such as lubrication of moving parts and tightening of loose components. x. repair or replace any damaged or worn parts to restore the system to optimal working condition. xi. document all repairs and replacements made during the revalidation process. xii. recommend and implement any necessary upgrades to enhance the safety and performance of the system. xiii. install additional safety features if required, such as shock absorbers or retractable lifelines. xiv. prepare a detailed report of the revalidation process, including inspection findings, test results, and maintenance performed. xv. maintain records of all certifications and compliance documents for future reference. xvi. schedule follow-up inspections to ensure continued compliance and safety. xvii. offer ongoing technical support and assistance as needed. xviii. lifting tools & tackles: vendor should get revalidation certification through a up factory competent person and submit all required documents to hpcl.

CTN :45361897

08 Jun, 2026 NA

Dakshina Kannada - Karnataka

Tender For supply of provision of overhead conveyor fall protection system and cross-overs for conveyors

CTN :45351357

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, acidity test kitspecifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, single phase resistive loadspecifications:type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability, three phase resistive load specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, three phase capacitor bank specifications: 3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided, 3 phase auto transformer starter specifications: 3-phase variable autotransformer input: 415 v output: 0 470 v ac (continuous) current: 15 a copper wound, carbon brush type heavy duty toroidal/core construction mounted in powder coated ms/crca enclosure front panel mounted voltage control knob with scale indication proper insulated terminals provided floor/bench mounted type suitable for laboratory use input / output terminal arrangement provided mcb/fuse protection provided proper earthing terminal provided ventilation arrangement for heat dissipation, 3 floor lift interfacing model specifications: type: table-top lift model floors: 3 levels structure: transparent acrylic / ms frame cabin: moving lift car with guide rails drive: dc geared motor / stepper motor motion: up/down movement, floor indication leds (1, 2, 3) direction indicators (up/down), start & stop atevery stage, over load limit control three-floor lift operation plc interfacing and programming floor selection logic automatic stopping at floors direction indication system educational demonstration of elevator automation, mcb elcb trainer kit specifications: 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5amps two pole elcb 30ma lamp load single phase 5amps panel enclosure and terminal outlets, signal generator specifications: frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vp-p. rise time: 100 ns. distortion, dso specifications: bandwidth: 50 - 100 mhz. sampling rate: 1gs/s. channels: 2 (minimum) power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalent communication interface: usb host, usb interface. 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf 2 passive probes (1x/10x), pwm based

CTN :45292066

01 Jun, 2026 NA

Dakshina Kannada - Karnataka

Tender For supply of provision of overhead conveyor fall protection system and cross-overs for conveyors

CTN :43521641

23 May, 2026 NA

Pune - Maharashtra

Tender For bid to ras bid to ras supply of 10535901 k10 1195 000003 04240 72 049 0832 nbc canister mk ii , 10535862 k10 1195 000031 6665 000 648 nbc facelet mask , 10536208 k10 8465 002968 8465 72 034 5438 nbc haver sack mk ii , 10307082 k10 6665 72 049 1936 three colour detector paper mk ii , 10535866 k10 6665 000624 rpl dosimeter reader mk ii , 10535867 k10 6665 000643 pocket dosimeter 521 n , 10535883 k10 6665 000646 portable dose rate meter pdrm , 10306761 k10 6665 000658 residual vapour detection kit rvd , 10536367 k10 1195 000028 nbc decontamination suit , 10535880 k10 4230 72 049 5519 personal decontamination kit pdk mk ii , 10535864 k10 4230 000035 portable decontamination appratus dap , 10536142 k10 8465 002967 nbc casualty bag half , 10535863 k10 8465 003010 nbc casuality bag full , 10307019 k10 6630001427 decontamination solution ds 2 , 10558024 k10 8415720468337 nbc suit premeable mk v small , 10558025 k10 8415720470257 nbc suit premeable mk v medium , 10558026 k10 8415720470258 nbc suit premeable mk v large , 10558027 k10 8415720470259 nbc suit premeable mk v extra large , 10535865 k10 6665 000623 radiacmeter personal locket rpl mk ii , 10634648 k10 4940123221731 multi purpose decontamination system , 10634686 k10 n8415 p009737 fullers earth 5kg container with pads , 10634687 k10 n4240 000055 fire fighting suits with compressed oxygen , 10634654 k10 k10 nk chemical agent monitor cam ) /bid number : gem/2026/b/7096335 * /dated: 09-01-2026 & & / bid document 1 / 28

Central Government/Public Sector

CTN :45254467

10 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of 01 set of spares for lifegear make gantry type 75 mtrs length horizontal lifeline fall protection system, one set consisting of 03 items as per annexure enclosed. make: lifegear [ warranty period: 12 months after the date of delivery ] ]

CTN :45045731

18 May, 2026 NA

Dakshina Kannada - Karnataka

Tender For corrigendum : provision of overhead conveyor fall protection system and cross-overs for conveyors

Central Government/Public Sector

CTN :44982281

11 May, 2026 NA

Bathinda - Punjab

Tender For corrigendum : supply of computers along with ups and batteries - computer system along with monitor , detailed specifications as per nit , ups , detailed specifications as per nit , battery rack 16 x 26 - with top sheet for fall protection , detailed specifications as per nit , cable interlink with lugs dav-1l100-uny12-6.2d , detailed specifications as per nit , cable interlink with lugs dav-1l400-uny12-6.2d , detailed specifications as per nit , cable interlink with lugs dav-1l600-uny12-6.2d , detailed specifications as per nit , ups battery , 12v , 26ah , detailed specifications as per nit