Latest neck bush Tenders | Government neck bush Tenders

Central Government/Public Sector

CTN :45405372

24 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of 20 pairs x 0.5 mm. dia. copper conductor twisted pair armoured underground telecom pijf cable, with solid polythene insulated copper conductors, core fully filled with filling compound and with poly al laminate moisture barrier bonded to the polythene sheath as per tec generic requirements no. gr/cug-01/03aug 2003 with latest amendment / version / revision. [ warranty period: 30 months after the date ofdelivery ] ]

CTN :45316030

10 Jun, 2026 4.90 Lacs

Giridh - Jharkhand

Tender For corrigendum : so(enm)/grd/e-nit/26-27/12 dtd- 25.05.2026 - complete repairing and maintenance of one (01) no. 1000gpm, 150 mtr. head, 150/200 ipb x 3chrs, wilo pump (mother & platt make) (sl. no.- 81316960/10/8) pump assembly of giridih area, machining charges of pump shaft with new key way, threads, bearing seats for above pump (without material), gun metal 2nd & 3d stage impeller new making as per sample with key ways., gun metal suction impeller repairing by both side color brass buildup and machining as per required std size., key new making for impellers., cast steel metal shaft sleeve new making for de & nde, c.i. casting neck ring new making., c.i casing neck bush new making., old neck rings and neck bushes opening, cutting and new neck ring and bush fitting with drilling, tapping and fixing csk head., c.i casting diffuser new making as per sample with casting., chamber body over size boring with alignment for fixing o/s new diffuser, chamber & diffuser locking & fixing with each other., chamber & diffuser neck ring & neck bush seat machining on lathe machine with body alignment checking, facing, gun metal casting balance valve new making, gun metal balance disc seat increasing, machining, drilling, counter hole making, sizing., roller bearing nu-313 new provide., pump body bolt new making as per sample with double nut., repair kit like as gasket packing, "o" rings, rubber joint packing, waterdeflector, oil rings, test cork, bye pass pipe line, cooling ring. gland studs., complete pump assembly dismantling and re-assembling & setting.., total impact of gst for the purpose of ctc

Central Government/Public Sector

CTN :45422490

22 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of polythene insulated polythene sheathed jelly filled (pijf) underground telephone cable with poly-aluminium moisture barrier and steel tape armoured copper conductor confirming to rdso specification no. irs:tc-41/97 amd.1 to 3 or latest .size-20 pair x 0.63mm dia [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337294

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of polythene insulated polythene sheathed jelly field (pijf) telephone underground cable 10 pairs 0.5mm dia with poly-moisture barrier tec gr.no.gr/cug-01/03 aug 2023 (tec standard tec 68090:2003) or latest accepted make: finolex, polycab, havells, national cables, delton cables or better. with 30 months warranty [ warranty period: 30 months after the date of delivery ] ]

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45346308

17 Jun, 2026 12.76 Lacs

Bardhaman - West Bengal

Tender For supply of impeller, lg-2 for pl-i stage pump , neck ring with screw, lb-2 for pl-i stage pump , neck bush with screw, lb-2 for pl-i stage pump , balance valve, pb-1 for pl-i stage pump , setting and bush with screw, lb-2 for pl-i stage pump , pair of sleeve, lg-2 for pl-i stage pump , set of two gland, brass for pl-i stage pump , set of two bearing bushes, lb-2 for pl-i stage pump , shaft with keys and sleeve nut for 4 stage for pl-i stage pump , impeller, lg-2 for pl-ii stage pump , neck ring with screw, lb-2 for pl-ii stage pump , neck bush with screw, lb-2 for pl-ii stage pump , balance valve, pb-1 for pl-ii stage pump , setting and bush with screw, lb-2 for pl-ii stage pump , pair of sleeve, lg-2 for pl-ii stage pump , set of two gland, brass for pl-ii stage pump , set of two bearing bushes, lb-2 for pl-ii stage pump , shaft with keys and sleeve nut for 3 stage for pl-ii stage pump , shaft with keys and sleeve nut for 4 stage for pl-ii stage pump , shaft with keys and sleeve nut for 5 stage for pl-ii stage pump , rotating assembly 5 stage for mla 100 x125 , rotating assembly 6 stage for mla 100x125 , shaft sleeve ds for mla 100x125 steel , pump shaft for 3 stage mla 100x125 , pump shaft 4 stage mla 100x125

Central Government/Public Sector

CTN :45333077

05 Jun, 2026 24.35 Lacs

Nagpur - Maharashtra

Tender For supply of water seal tube , water slinger rubber 4 stg , balancing water conn point line assly 4 stg , dowel pin brg point body to suc cvr and bal vlv , sleeve nut d e 3 stg , bearing cap and brg point body de and nde 4stg , bearing bush de and nde 4 stage , oilsight window assy point 4stg , sleeve nut nde 4 stg , shaft sleeve nde 4 stage , balance valve cover , balance valve , countersunk screw , large seating and bush 4 stg , nut for stay rod 4 stg , washer stay bolt 4stg , stay bolt , delivery diffuser c i , neck bush , imp key , combined diffuser and return valve , o ring , wearing ring casing , water seal ring half , split gland bronze , oil ring de and nde , impeller bronze , pump shaft , shaft sleeve de , clinch fitting

Central Government/Public Sector

CTN :45298757

01 Jun, 2026 58.92 Lacs

Angul - Odisha

Tender For supply of key for pump half coup. part no- fm590bd2302104491001 , oil ring d.e. and n.d.e. part no- fm590bd2302104491003 , split gland part no- fm590bd2302104491007 , water seal ring split type part no- fm590bd2302104491009 , shaft sleeve d.e. part no- fm590bd2302104491010 , wearing ring casing part no- fm590bd2302104491012 , grub screw casing wearing ring part no- fm590bd2302104491013 , o-ring part no- fm590bd2302104491015 , imp. key part no- fm590bd2302104491018 , grub screw neck bush part no- fm590bd2302104491020 , neck bush part no- fm590bd2302104491021 , dowel pin part no- fm590bd2302104491022 , impeller part no- fm590bd2302104491023 , o ring part no- fm590bd2302104491029 , large seating and bush delivery cover part no- fm590bd2302104491031 , counter sunk screw part no- fm590bd2302104491032 , balance valve part no- fm590bd2302104491033 , dowel pin brg. body to suction cover part no- fm590bd2302104491034 , key part no- fm590bd2302104491035 , shaft sleeve n.d.e. part no- fm590bd2302104491037 , sleeve nut n.d.e. part no- fm590bd2302104491038 , bearing bush d.e. and n.d.e. part no- fm590bd2302104491044 , brg. cap and brg. body d.e. and n.d.e. part no- fm590bd2302104491045 , sleeve nut d.e. part no- fm590bd2302104491059 , flexible coupling pin-bush type part no- fm590bd2302104491064 ) /bid number : gem/2026/b/7552272 * /dated: 22-05-2026 & & / bid document 1 / 41

Central Government/Public Sector

CTN :45302987

13 Jun, 2026 49.89 Lacs

Nowrozabad - Madhya Pradesh

Tender For supply of pump shaft_pn_1 , bearing bracket housing d e _pn_2 , cover for brg hous d e _pn_4 , sleeve nut d e _pn_7 , collar inter stage_pn_8 , bush inter stage_pn_9 , impeller 1st stage_pn_10 , impeller 2nd stage_pn_13 , wearing ring casing_pn_16 , shaft sleeve_pn_17 , water seal tube_pn_18 , water seal ring_pn_20 , gland half_pn_21 , lock washer for bearing_pn_24 , lock nut for bearing_pn_25 , shaft collar_pn_26 , cover for brg hous n d e _pn_28 , sleeve nut n d e _pn_29 , bearing bracket housing n d e _pn_44 , pump shaft_pn_m590bd2 , oil ring_pn_m590bd3 , gland half_pn_m590bd7 , water seal ring half_pn_m590bd9 , shaft sleeve d e _pn_m590bd10 , suction end casing_pn_m590bd11 , wearing ring casing neck ring_pn_m590bd12 , impeller_pn_m590bd14 , imp key_pn_m590bd15 , combined diffuser and return vane_pn_m590bd18 , neck bush_pn_m590bd19 , delivery diffuser_pn_m590bd21 , stay bolt_pn_m590bd22 , large seating and bush_pn_m590bd26 , imp key_pn_m590bd27 , balance valve_pn_m590bd30 , balance valve cover_pn_m590bd31 , shaft sleeve n d e _pn_m590bd32 , sleeve nut n d e _pn_m590bd33 , gasket_pn_m590bd36 , hex hd cap screw_pn_m590bd37 , oil sight window assy _pn_m590bd39 , bearing bush_pn_m590bd40 , brg cap and brg body d e and n d e _pn_m590bd41 , sleeve nut d e _pn_m590bd43 , stud bolt with nut_pn_m590bd45 , stud bolt with nut_pn_m590bd47 , balancing water conn line assy _pn_m590bd48 , hex hd bolt with nut_pn_m590bd53 ) /bid number : gem/2026/b/7547538 * /dated: 23-05-2026 & & / bid document 1 / 60

Central Government / Public Sector

CTN :45210944

22 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of 20 pair pijf cable. 0.63 mm copper conductor dia, armored with galvanized steel tapes , polythene insulated , polythene sheathed , jelly filled, telephone cable with pol-al moisture barrier as per the specification no. irs:tc 41-97. or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 2 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Neck Bush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector