Latest neon signboard Tenders | Government neon signboard Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

CTN :41242880

06 Oct, 2025 6.63 Lacs

Panchkula - Haryana

Tender For bid to ras repair and servicing of various type of air conditioner at btc itbp bhanu - cleaning and servicing of 1.5 tr window air conditioner complete in all respect up to the satisfaction of consumer or engineer in charge , cleaning and servicing of indoor and outdoor unit of 1.5tr split air conditioner complete in all respect up to the satisfaction of consumer or engineer in charge. , cleaning and servicing of vrv indoor and outdoor units complete as per direction and up to satisfaction of consumer or engineer in charge. note 01no job will be count for complete cleaning and servicing of 1 outside unit and with its attached indoor units , cleaning and servicing of 3tr cassette type air conditioner indoor and outdoor units complete as per direction and upto satisfaction of consumer or engineer in charge. , cleaning and servicing of 3tr tower type air conditioner complete in all respect up to the satisfaction of consumer or engr in charge. , cleaning and servicing of 4tr tower type air conditioner complete in all respect up to the satisfaction of consumer or engr in charge. , providing and filling of r 22 or r 32 gas as per compatibility in 1.5 tr split air conditioner complete in all respect up to the satisfaction of consumer or engr in charge. , removing and re fixing of existing 1.5tr window air conditioner from outer frame and filling of r 22 or r 32 gas as per compatibility complete in all respect up to the satisfaction of consumer or engr in charge. , providing and filling of r 410a gas in main vrv unit as per direction and upto satisfaction of consumer or engineer in charge. , providing and filling of r 22 or r 32 gas as per compatibility in 3 tr cassette type air conditioner as per direction and upto satisfaction of consumer or engineer in charge. , providing and filling of r 410a gas in 4 tr tower type air conditioner complete in all respect up to the satisfaction of consumer or engr in charge. , providing and replacing printed circuit board pcb of 1.5 tr window type air conditioner in all respect up to the satisfaction of consumer or engineer in charge. , providing and replacing printed circuit board pcb of 1.5 tr split type air conditioner in all respect up to the satisfaction of consumer or engineer in charge. , repair of printed circuit board pcb in main vrv unit complete upto working condition and as per direction and satisfaction of consumer or engineer in charge. , repair of indoor printed circuit board pcb of vrv unit upto working condition complete and as per direction and upto satisfaction of consumer or engineer in charge. , removing and refixing of pcb printed circuit board for 3tr cassette type air conditioner including cost of repair complete upto working condition as per direction and upto satisfaction of consumer or engineer in charge. , providing and replacing unserviceable outdoor fan motor unit for 1.5 tr split air conditioner complete in all respect up to the satisfaction up to the satisfaction of consumer or engineer in charge. , providing and replacing unserviceable indoor fan motor unit of 1.5tr split type air conditioner complete in all respect up to the satisfaction of consultant or engineer in charge. , providing and replacing unserviceable indoor fan motor unit of indoor unit of vrv type air conditioner complete in all respect upto the satisfaction of consultant or engineer in charge. , providing and replacement of cover of outdoor unit of 1.5tonne split type air conditioner complete in all respects up to the satisfaction of consumer engineer in charge. , providing and replacing of power contactor of outdoor unit of 3 tr cassette type air conditioner complete upto working condition as per direction and upto satisfaction of consumer or engineer in charge. , providing and replacing defective copper condenser coil in 1.5tr split air conditioner complete in all respects up to the satisfaction of consumer or engineer in charge , providing and replacing defective capacitor 35 or 40 or 50 mfd in wi

CTN :42062537

16 Oct, 2025 NA

Pune - Maharashtra

Tender For tender for displaying advertisement hoardings in pune cantonment board limits for the period 2025-2027 note: 1. 1) the size of hoardings shall not be increased / decreased. 2) the contract period is for two years and the amount is to be quoted per annum by the tenderer for the respective sites mentioned below 3) the sites of hoarding will be allotted to the highest bidder)4) service tax as applicable shall be paid by the tenderer separately to the board.5) hoarding has to be displayed from one side only. there will be no change in direction of display without prior written permission of ceo.