Latest neoprene gasket Tenders | Government neoprene gasket Tenders

State Government

CTN :45721001

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan jaipur - providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness, providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick : is 710- 1976 marked 12mm thick teak ply bwr both side, providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade : ivory coast wood grade i, providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. with brass cover plate

Co-operative

CTN :45715046

06 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For supply of re-non authorized suppliers - "bearing hose pipe with connector ,din-20022-en853-isn-1/4""-06mm- w.p.-225 bar/3270psi-4q2012 make - polylex" , cane unloader bridge wheel as per drg. bssuk/mh/821/16 (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader trolley wheel as per sample (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader bridge wheel gear as per drg. no. bssuk/mh/832/16 moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , "pinion unloader no. 1 & 2 bssuk drg. no. u-1 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 1 & 2 bssuk drg. no. u-2 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "big gear unloader no. 1 &2 bssuk drg. no. u-03 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 3 bssuk drg. no. u-4 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-6 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-8 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-10 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-12 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-20 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-30 mm make-champion/spitman , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 03mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 06 mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 08mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 10mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 12mm make - champion/spitman" , "low pressure joint sheet size - 1.5mm style - 20 make -champion/spitman" , "low pressure joint sheet size - 3mm style - 20 make - champion/spitman" , "low pressure joint sheet size - 5 mm style - 20 make - champion/spitman" , "h.p. metallic steam joint 1.5mm style - 54 super make - champion/spitman" , "h.p. metallic steam joint 3 mm style - 54 super make - champion/spitman/ ferrolite" , "h.p. metallic steam joint 5 mm style - 54 super make - champion/spitman/ ferrolite" , rubber joint sheet size-2mtr x 2 mtr. , "wire rope cuppi 2 wear(way) make - heavy duty" , "wire rope cuppi 1 wear(way) make - heavy duty" , "gauge glass a-9 (with mica & gaskit set) make - klinger" , spiral joint 308x 275x 5mm moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 342x310x5mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 255x395x3mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 154x245x3mm, mmoc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 248x218x5mm,moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 220x242x3 moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 310x340x5moc-s.s 316/nicle alloys(inconel 625) make - i

CTN :45712821

14 Jul, 2026 5.13 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of hardware items - holtite 1 2 kg , restoline 1 2 kg , brasso 500ml , araldite 1 800kg , borex powder 1 kg , plastic rope 3 4 inch , plastic rope 3 8 inch , teflon tape 3 4 inch , dunlop make rubber hose pipe of size 3 4 inch size , dunlop make rubber hose pipe of size 1 inch size , graphites powder , guage glass 7 h make klinger , guage glass a 9 make klinger , black rubber sheet joyti 1 8 inch , black rubber sheet joyti 1 4 inch , white grade no 1 cotton waste , color grade no 1 cotton waste , blue tube of 20 ml , emery cloth fine 120 grit per rim , emery cloth rough 40 grit , emery tape size 2 inch x 50 mtr grit 120 , emery paste rough 400gm , emery paste fine , spilit pin all size champion make as per list as per ppl , gm wheel valve 1 2 inch make sant , gm wheel valve 3 4 inch make sant , gm wheel valve 1 inch make sant , gm wheel valve 1 1 2 inch make sant , gm wheel valve flange type 1 inch make sant , gm right angle valve 15 mm make sant , ss needle valve 10 mm tested at 10 kg cm2 with test certificate , ss needle valve 15 mm tested at 10 kg cm2 with test certificate , ss needle valve 20 mm tested at 10 kg cm2 with test certificate , stag b red type , m seal , alluminium rivit size 1 4 inch x1inch , locktite no 641 in 50 ml , steel wire rope siling as per drg 1 inchx7 mtr load approx 12 tone capacity , steel wire rope siling as per drg 1 inchx6 point 7 mtr load approx 12 tone capacity , steel wire rope siling as per drg 1 2 inchx3 point 5 mtr , steel wire rope siling as per drg 1 inchx1 5 mtr , simplex chain 1 inch pitch diamond make , wire braided rubber hose pipe size 1 inch suitable for 150deg , wire braided flexible rubber hose pipe heavy duty temp cf machine 1 4 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 3 8 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 1 2 inch x 1 5 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 3 4 inch x 2 mtr , wire braided flexible rubber hose pipe heavy duty temp cf machine 2 1 2 inch x 12 inch , break lininer size 1 2 inchx 12 inch width , steel wire rope 3 4 inch usha martin make construction 6 36 with test certificate , simplex chain 2 poin 1 2 inch pitch diamond make , glass toughened sight glass size 100mmx15mm , glass toughened sight glass size 250mm x 16mm , glass toughened sight glass size 220mm x 16mm , glass toughened sight glass size 210mm x 16mm , glass toughened sight glass size 200mm x 16mm , glass toughened sight glass size 180mm x 16mm , glass toughened sight glass size 160mm x 16mm , glass toughened sight glass size 125mm x 12mm , bearing sleeve h 207 make jmc , bearing sleeve h 209 make jmc , bearing sleeve h 213 make jmc , bearing sleeve h 307 make jmc , bearing sleeve h 313 make jmc , bearing sleeve h 312 make jmc , bearing sleeve h 315 make jmc , bearing sleeve h 317 make jmc , bearing sleeve h 318 make jmc , bearing sleeve h 322 make jmc , bearing sleeve h 2318 make jmc , bearing sleeve h 3134 make jmc , marking cloth , clean old cloth dhoti

State Government

CTN :45699630

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan, jaipur. - providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness , providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick is 710-1976 marked 12mm thick teak ply bwr both side , providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade: ivory coast wood grade i , providing and fixing double action hydraulic floor spring of approved brand and manufacture is: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with ibrass pivot and single piece m.s. with brass cover plate , supply of wool jute kilim rugs blend natured fibers with timeless hand-weaving traditions crafted by skilled artisans, each rug carries earthy charm & durability. hand woven from rich wool and strong juke, these killim rugs bring texture, strength and artistic character to any space. every piece is made slowly and thickness 5 to 6 mm. size:-8'x10' size:-2'x24' size:-2'x20'

State Government

CTN :45680270

16 Jul, 2026 NA

Kheda - Gujarat

Tender For supply of various instruments for chp & bop area of wtps unit 8. - over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller with sensor probe set, make: jayashree, speed setting: 100 to 1000 rpm, 4 imp rev,2no + 2nc,5a @ 240v ac, supply voltage:90-250v ac, sensor probe model: sp 12 b 30*65 10 m, termination: 3 wires dc., chlorine leak detector - single sensor for model no. 5002, range : 0 to 5 ppm of chlorine,make: perfect chloro system, magnesium anode rod, length: 30 cm, diameter:- 1/2 (half) inch., pressure gauge, 0-16 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body : ss316lor suitable, dial :150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge, 0-21 kg/cm2, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m) direct bottom entry, ip65, pressure gauge dial size 150mm with range 0-10 kg./cm2, temperature gauge, 0 to 160 deg c, bi -metal strip coiled, dial 150mm, +/- 1 percent fsd accuracy, 12mm stem dia, 100mm stem length, ss304 case, neoprene gasket, 1/2 inch npt(m) process connection, 1/2 inch npt (m) adjustable to thermowell, rtd pt 100, duplex, sheath dia. 6 mm, sheath length 150 mm, ag make proximity switch, model: ps 2000d, input power : 24 vdc, proximity dia : m50, sensing dist : 16 mm-25mm, 4 wire type, wire length : 5 mtrs, contact: 1no+ 1nc., pointer puller for pressure gauges, electronic speed switch monitoring unit with indictive sensor probe, 10-100 rpm, 4 digit speed indication, 90-250v ac supply, accuracy : +/-5 percent, calibration 4 imp / rev, 1-20s itd & ntd, ip65, pressure switch ,range 0.6 to 6 kg/sqcm, pressure switch range : 1 to 10 bar, pressure switch, range 1.6 to 16 bar, type : bellow, connection : 1/2" npt, bottom entry, vacuum switch low, (-760 to 0)mmhg, diapragm seal tantalum/monel or better for chlorine service, body-ss316l or suitable, die cast aluminium or better enclosure, accuracy : +/-0.5 percent, process connection:1/2 in. npt(m), 2spdt, ip66, pressure switch, 0.3-1.6 kg/cm2, tantalum/monel or better diaphragm seal, chlorine service, body-ss316lor suitable,die cast aluminium or better enclosure, repeatability : +/-1 percent , process connection : 1/2 in. npt(m), 2spdt, ip66, vacuum gauge, (-760 to 0) mm hg, bourdon with tantalum/monel or better diaphragm seal, chlorine service, body:ss316l or suitable, dial:150mm+/-10 percent, accuracy:class 1, process connection 1/2 in. npt(m), ip65, pressure gauge 0-6 kg/cmsq, pressure gauge 0-10 kg/cm2, pressure gauge range 0-16 kg/cm2 size 100 mm, over travel limit switch (otls), make: electromag methods, model:- elotc/2no2nc, amps: 40 / 10, voltage: 500 vac, c/s: 50, ag make heavy duty limit switch type : hls/ii. contacts : 2 no + 2 nc rating : 25 amps @ 415 v.ac enclosure : die casting aluminum (lm-6) gasket : nitrile rubber gasket reset : auto reset type, digital pressure gauge: range: 0 to 100 kg/cm2, zero speed switch, make: protocontrol instruments pvt. ltd, model: esm b2, sensing range: 15-17mm, supply: 220vac , range: 10 -100 rpm, wire: 2 wire, ppr: 4, cable length: 2 meter (mininum), sr no: 15j252., inductive proximity switch, sensing distance: 25mm, supply: 230v ac, dimension: 50mm x 110mm., zss controller

CTN :45678714

11 Jul, 2026 5.50 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of wooden hand wire brush 3 inch x 6 inch , teflontape 3or4inch x 10mtr , rustolene pidilite make 500ml , holdite 500 gm pack pidilite make , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack astralorpidiliteor m m make , blue tube 15ml atlas orcamel make , piano wire , graphite powder fine , hacksaw blade double side 1or2inch x 12 inch hss miranda make , hacksaw blade double side 1or2inch x 12 inch low carbon steel , marken cloth cotton , conical grinding wheel 1inch x 2inch , grinding wheel 1.5 inch , buffing wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 14inch boschor dewalt make , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass imported and plane , stainless steel plate grade 304 plain sheet size 4 feet x 8 feet x 3 mm thickness , anabond 112 thread locker 50 ml , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough 400 gm carborandum universal make , emery paste fine 400 gmcarborandum universal make , brass solid round bar extruded quality size 20mm od , brass solid round bar extruded quality size 25mm od , brass solid round bar extruded quality size 50mm od , boiler gauge glass bishop make size 3or4inch x 16.5 inch , boiler gauge glass bishop make size 3or4inch x 22.5 inch , solenoid valve with coil rotex make model no 3012 two way , solenoid valve with coil rotex make model no 3013 one way , stag jointing paste type b red in 1 kg pack , galva coating gcs 73 bright finish make aerotech 500 ml , grinding wheel black for bench grinding machine size 1.5inch x1.5 xinch x12inch , grinding wheel green for bench grinding machine size 1.5inch x1.5 xinch x12inch , usha martin make steel wire rope 3or4inch,6or36 construction hemp core with test certificate 305mtr in one roll , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make size 3or8 inch 100 piece per pack , spring washer bbbb make size 1or2 inch 100 piece per pack , spring washer bbbb make size 5or8 inch 100 piece per pack , spring washer bbbb make size 18mm 100 piece per pack , split pin champion make size 1or4 inch x 2 inch 100 piece per pack , split pin champion make size 1or4 inch x 2.5 inch 100 piece per pack , split pin champion make size 1or4 inch x 3 inch 100 piece per pack , anabond 666-250ml , leather hand gloves pair ador or asha make , rubber star for coupling set l-70 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , paint brush size 2inch , paint brush size 3inch , paint brush size 4 inch , red oxide primer british paint-asian make 20ltr drum , borex powder suhaga , graphite fire crucible 120 kg ,make india super -double kabootar , ss flat grade -305 size -12mm x 65mm , silver rustam brazing flux 500gm , sleeve 3or4 inch nationalorleader make for tubular gauge glass , rubber cone 3or4 inch nationalorleader make for tubular gauge glass , flexible hand grinder for 2 inch wheel sf-2 model alond with shaft raly wolf 10fd accessories , wire rope u clamp heavy duty size 3or4inch , monarch save past tpxt-high temp titanium putty ,working temp 500centi complete kit , needle roller bearing axk4060 with sleeve , needle roller bearing axk7095 with sleeve , needle bearing ba1816 with sleeve , rubber oil seal 65x85x10 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x55x8 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x72x10

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

State Government

CTN :45607137

23 Jun, 2026 1.98 Lacs

Rohtak - Haryana

Tender For - a/mtc of water treatment plant sector-34, u/e, rohtak, `providing and fixing of 10mm thick pvc (poly vinyl chloride) panel, glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber /neoprene gasket etc. complete in the o/o sde-ii, hsvp, rohtak and all other works contingent thereto`. a/c rs. 1.99 lacs em rs. 3980/- time limit : - 01 month

CTN :45609418

29 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of s ss304l 3inch pipe sch 40 , s ss304l 1inch pipe sch 40 , s ss304l tube 3by8 inch sch 80 , s ss wn flange 3 inch class 150 , s ss wn flange 1 inch class 150 , s ss wn flange 3by4 inch class 150 , s ss blind flange 3 inch , s ss blind flange 1 inch , s ss elbow 3inch 90 deg astm a 403 seamless , s ss elbow 1inch 90 deg astm a 403 seamless , s ss equal tee 3inch astm a 403 grade wpb seamless , s ss equal tee 1inch astm a 403 grade wpb seamless , s ss reducer 3inchx2inch astm a 403 grade wpb seamless , s ss reducer 3inchx 1.5inch astm a 403 grade wpb seamless , s ss reducer 3inchx 1inch astm a 403 grade wpb seamless , s ss nipple 1inch , s ss dust cap 1inch with ss chain 100 mm length , s ss dust cap 3by4inch with ss chain 100 mm length , sandi ball valve 3inch , sandi ball valve 1inch , sandi ball valve 3by4inch , sandi spring return valve 1 inch , sandi nrv 3inch , sandi y type strainer 3 inch , sandi basket type strainer 3 inch , laying of pipes , welding of pipes , hydrotesting of ss pipe ntw , sanda blasting and primer coat , sanda int 1 and fin 2 paint coating , blasting and coal tar epoxy coat , blasting and internal epoxy coat jet a1 , sitc aodd pump , s metallic gaskets , s neoprene gaskets , s ss piping stud bolts and nuts , s copper jumpers , supply of pipe ms 25mm , laying of pipe ms 25 mm , supply of pipe ss 25mm , laying of pipe ss 25 mm , sandi ss flange 25 mm , sandi ms flange 25 mm , sandi ms flange 50 mm , sandi 25 mm tee , sandi elbow 25 mm , sandi reducer 50mm to 25mm , sandi nrv 25 mm flanged ends , sandi gate valve 25 mm flanged , sandi thermal safety relief valve 25mm * /bid number : gem/2026/b/7681214 + /dated: 18-06-2026 ' ' / bid document 1 / 36

CTN :45594065

27 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For supply of ss304l pipe 3 inch sch 40 , ss304l pipe 1 inch sch 40 , wn flange 3 inch class 150 , blind flange 3inch , tee 3inch , elbow 3inch , butterfly valve 3inch , gate valve 3inch , ball valve 1inch , stud bolts and nuts , metallic gaskets , neoprene gaskets , copper jumpers , pipe laying , welding , primer coating , painting , hydrotesting , air compressor , aodd pump , ss sampling tank , y strainer 3inch , nrv 3inch , nrv 1inch , pressure gauge , ss nipple 1inch , ss dust cap 1inch , 2.5inch api hose 10m , 2inch api hose 15m , underwing coupling , coal tar epoxy coating , internal epoxy coating , manhole modification

Neoprene Gasket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative

State Government

State Government

State Government

State Government