Get complete information related to latest Netting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Netting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Netting Tenders.
Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no
Tender For quotation for rate of materials - stone boulder of size 150 mm and below at quarry supply of quarried stone 150-200 mm size for hand broken at quarry boulder with minimum size of 300 mm for pitching at quarry gravel/quarry spall at quarry gelatin 80% jute netting, open weave, 2.5 cm square opening for seeding and mulching random rubble stone sand bags (cost of sand and empty cement bag) square rubble coursed stone stone bricks of size (i) 250 mm x 125 rım x 100 mm (ii) 250 mm x 125 mm x 125 mm (i) g.i. wire (8 to 10 swg) (ii) black annealed (8 to 10 swg) binding wire (i) annealled wire (20 to 25 gauge) (ii) black annealed (20 to 25 gauge) expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide bituminastic board (for use as per expansion joint 1.5.1838 1938 filter) (i) 25 mm thick 150mm dia r.c.c.np2 perforated pipe pressure release valve (1) safety valve (ii) pocket valve cost of burnt clay pipe of internal dia 31.70 mm (11/4") external dia 38 mm (11/2") (1)100 mm long (ii)225 mm long fuse coil bolts 20 mm dia 25 cm long nuts and bolts 16 mm dia375 mm long with washer etc palm leaves check valve 38 mm dia. 38 mm dia. water hose 30m long nx core bit 48 cts(imp) nx core bit 38 cts(imp) nx tc bit bx tc bit nx st reamer cell 6.5 cts(imp) bx st reamer cell 6.5 cts(imp) good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores ie. total 15 metre
Tender For supply of painting and hardware material glass panes, plyboard,cement , sand for quarter no. q-08 punjabi university - oil bound distemper,wall care putty , neel , sandpaper, universal water stainer tube yellow oxide , s/e white paint , s/e oxford blue paint ist quality , fevicol ddl , t.t. oil , paint brush , wire netting , commercial plywood , conduit pipe , palmet patti, iron door spring , glass panes , glass putty , aluminium tower bolt , aluminium handle, m.s. screw , m.s. hinges aluminium sheet , m.s. nails ,m.s. black nails , fevicol sh ,aluminium double door stopper , kail wood, aldreen t.c. ,cement bags ,p.o.p. , malmal, lime ,coarse
Tender For supply and application of hot thermal insulation on pipe lines and equipment at hwp, tuticorin - supply and apply of inhibited lightly resin bonded machine laid machine stitched rockwool mattresses (lrb) having density 128 kg/m3 backed with one side ss hexagonal wire netting of size 3/4" x 22 swg for pipelines below inches. for . this material shall conform to is: 8183. ,0.5"nbxthick 25mm, 0.75"nbxthick 25mm, 1"nbxthick 25mm, 1.25"nbxthick 25mm, 1.5"nbxthick 25mm, 2"nbxthick 30mm, 2.5"nbxthick 30mm, 3"nbxthick 30mm, 4"nbxthick 30mm, 5"nbxthick 30mm, 6"nbxthick 40mm, 6"nbxthick 50mm, 8"nbxthick 40mm, 8"nbxthick 50mm, 10"nbxthick 40mm, 12"nbxthick 50mm, 14"nbxthick 50mm, 16"nbxthick 50mm, 18"nbxthick 50mm, supply and apply of inhibited lightly resin bonded machine laid machine stitched rockwool mattresses (lrb) & loose wool (loose fill)having density 128 kg/m3 backed with one side ss hexagonal wire netting of size 3/4" x 22 swg for the vessels / equipments mentioned below.this material shall conform to is: 8183. 31c1,50 mm thick, 14v6,40 mm thick, 14h1,60 mm thick, 14s3,40 mm thick, 14v2,40 mm thick, 12e2,40 mm thick, removal of hot insulation from pipe lines up to 6", removal of hot insulation from pipe lines above 6", removal of hot insuation from equipmet, erection and de-erection of scaffolding at various locations in the plant required for application of paint & insulation., mechanised surface cleaning using flap wheel machine , application of two coats of 30 micron thick each bituminous black/heat resistant aluminium paint for pipelines / equpments prior to application of hot/cold insulation.supply of heat resistance aluminium paint for temperature up to 600 deg *c as per is:3384, wherever insulating the pipe lines which are found to be no u clamps, shoes and saddle supports same shall be fabricated and proveded by smaw welding and shall be fixed with ismc sheets and new fasteners. the required ms plate and fasterners will be supplied by the deaprtment as free issue material. whereever gratings and structrues are foulig for insulation of pipe lienes asmae shall be rectified prioar to insualtion.
Tender For supply of material for flat no. rsf-16 sf at pup - red marindi wood, plain glass app. 4mm thick 4'x2', kail wood, wire netting app. 22x12 gauge, aluminium tower bolt 144 mm, aluminium handle 95 mm, fevicol sh (1 kg pack), m.s. nails 4", m.s. black nails ", m.s. screw 1 " (100 pc pkt), oil bound distemper 10 kg, s/e grey paint (ist quality) 4 ltr pack, t.t. oil (1 ltr pack),. lime (10 kg pack), aldreen t.c. 20% e.c. (1 ltr pack)