Tender For supply of miscellaneous consumables for unit coh and routine maintenance work at emd-2-tg wtps,gsecl. - ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, godrej make 7 lever door lock, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, polyester webbing sling, swl 5000 kg x 3 mtr, impact wrench power/battery operated, cordless screw driver power/battery operated, flat cable 3 corex4 sqmm with copper conductor for submersible motor, painting brush size 3" (75 mm), painting brush size-38 mm, allen key set of size : 1/16" (inch) to 3/8" (inch), allen key set of size 1.5 to 10 mm, rusting clean brush, wire brush round 1.1/2", plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., hand drill machine size 13mm, britelite 1200 meters long rang torch rechargeable led flashlight with charger., drill bit set it/addision,size;2 mm to 10 mm., pvc hand gloves acid/alkali proof size 16" (yelow colour), esab earthing clamp, washing powder ( 1 kg pack ), transparant tumbler 1 ltr, pvc buckets-15ltr, painting brush size 2" (50 mm), self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, dr. back make backtol red in 1 lit. tin varnish, light gray paint size 4 liters light gray paint size >> 1 liter., rotary selector switch capacity-12amp ,3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, test leads (probes) for digital multimeter, auxiliary relay re-300 coil voltage 250v dc, jyoti make re-300 plug in type relay , coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating., plastic tool box with organizer product no.:- ptb 16 (195 x 240 x 435), integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - red., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - green., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - amber., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - white., integral led type solid state indicating lamp with lamp holder & lens for 230 v dc +/- 10 percent panel cutout, 30.4 mm dia colour blue, start push button c & s make type- rb2-ba3+rb2-bz10 (rcb2-ba3)., mushroom head stop pushbutton turn to release c& s make,type- rb2-bs54+rb2-bz10 (rcb2-bs54)., contact element -1no. code rb2be101 make c&s, contact element, 1 nc contact, c and s cat. no. rb2-be-102, 250 v ac/dc control supply switch, capacity-16amp,type-base mount., multifunction multirange timer type:-micon225 0.1 sec -10 hrs., 24/240 vac/dc, cat no: 2a5dt5, 2c/o make:-l&t, manila rope, size: 16 mm dia, manila jute rope size 12 mm, auxiliary relay of jyoti make re-300 with led indication, 4 c/o contacts for 110v ac., jyoti make re-300 plug in type relay , coil voltage 24 v,dc with led indication & 4 change over contact having 10 amp rating.
Tender For supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxiliary contact blo
Tender For corrigendum : tender for supply of closing coil-220v dc , tripping coil - 220v dc , vacuum interrupter stelmec make , breaker control switch(non-lockable) , spring charging motor , 220v ac , breaker auxiliary switch(8no+8nc) , breaker limit switch stelmec make , epoxy housing stelmec , drive insulator stelmec , tulip contact assembly (1250 a) stelmec , spout(1250 a) for r , y and b phases , closing spring assembly with 40ka mechn. , power relay/solid state relay 220 v dc , 32 pin plug and socket , p/n e0000001369
Tender For supply of circuit breaker 25 amp as per abb part no. s203-k-25 with auxiliary contact as per part no. s2c-h20l [ warranty period: 30 months after the date of delivery ]
Tender For supply of power contactor, capacity-70a, no. of poles-3pole, power supply-3 phase, 415v ac,50/60 hz, type-ac-3 type, contr ol voltage-110v ac coil, mounting-individual mounting type, no. of auxiliary contact: 2no+2nc. [ warranty period: 30 months after the da te of delivery ]
Tender For supply of mpcb for (motor protection circuit breaker) of current rating:1.6 amps, thermal release range 1 to 1.6 asmp, class-10, breaking capacity: 50 k a, 3 pole ,voltage rating-415 volt ac with 01 no+01 nc auxiliary contact block similar to catalogue no:ms116-1.6 + hk1-11 of abb make. make:-aeg, l&t, s chneider, abb, siemens (as per bom item 36 of edts 355 rev-1 or latest) only [ warranty period: 30 months after the date of delivery ]
Tender For supply of circuit breaker 3 pole for tm blower and oil cooling unit transformer/converter along wi th auxiliary contact (2 no type) as per clw spec. no. clw/es/3/0096 (alt.-l) (63 amp) [ warranty pe riod: 30 months after the date of delivery ]
Tender For corrigendum : supply of circuit breaker 10a, 3pole, type -18 with auxiliary contact 2 no for 3 phase locos as per clw spec. no.- clw/es/3/0096 (alt.- l) and abb document no. hbtb585552r3013 [ warranty period: 30 mont hs after the date of delivery ]