Latest night vision goggles Tenders | Government night vision goggles Tenders

State Government

CTN :40684471

26 Jun, 2025 18.15 Lacs

Vijayawada - Andhra Pradesh

Tender For procurement of electrical materials for regular electrical maintenance works in all floors of sldc building, ground, first & second floors of main building vidyut soudha and ground & first floors of appcc building in vidyut soudha premises, vijayawada - supply of 36 wrecessed / surface mounting 2' x 2' (600x600 mm) led luminaire made of crca sheet housing with powder coated with acrylic diffuser, constant current driver as per is: 15885 (part 2/ sec 13) : 2012 , with operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens / watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply of 22 w led slim panel round /square suitable for recessed / surface mounting made of diecastaluminum body with powder coating, acrylic diffuser with driver as per is: 15885 (part 2/ sec 13) : 2012, operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens /watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply of 18 w led slim panel round /square suitable for recessed / surface mounting made of diecastaluminum body with powder coating, acrylic diffuser with driver as per is: 15885 (part 2/ sec 13) : 2012, operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of >=100 lumens /watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete crompton make., supply and transportation of150w led street light luminaire made of pressure diecastaluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in-house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. a) luminaire make : wipro(skyline) / philips (greenline extra) / ge- venture / crompton(nexus / hawk series) / bajaj (edge) / halonix (modular/ lumos-super) / havells (endura series)/greenlites(hi-lux) /capart(premium)/polycab/keselec / hpl(city vision)/jaquar (premium) /eveready /surya (pollux) / fortune arrt (leaf) / rhino(gpsl06) b) led make :philips lumileds / cree / nichia / osram / samsung / lg., supplyof 24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts, with high power leds, having system efficacy of >=100 lumens/watt , pf>0.9, surge protection: 2kv, thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, etc., complete crompton make., supply and transportat of led 18 w stylus surface led light slim panel round /square ., , , supplyof 24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts, with high power leds, having system efficacy of >=100 lumens/watt , pf>0.9, surge protection: 2kv, thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, etc., complete crompton make., supply and transportat of led 18 w stylus surface led light slim panel round /square ., ,

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government / Public Sector

CTN :40684597

07 Jul, 2025 NA

Kamrup - Assam

Tender For procurement of smart overspill protection system for tank wagon

Central Government/Public Sector

CTN :40702020

19 Jun, 2025 NA

Hubli - Karnataka

Tender For supply of protection card (item code: 2f00000000398) make:-sanrok enterprises as per the rdso spe c. no. rdso/2013/cg-06 r2. for automatic fire smoke detection and suppression system (fdss). [ warra nty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40701739

23 Jun, 2025 NA

Mysore - Karnataka

Tender For supply of auto levelling instrument - magnification factor of 28x or more ,with compensator setting acc uracy of 0.5second (pendulam compensator with magnetic damping system ), having minimum focus dista nce of 0.3m,minimum ip 56 ingress protection ,1year warranty, with all accessories and carrying case - sok kia b30 or similar [ warranty period: 12 months after the date of delivery ]

State Government

CTN :40709371

27 Jun, 2025 9.60 Lacs

Bicholim - Goa

Tender For supply, installation, testing and commissioning of fire protection system for water resource department at bicholim goa

Central Government/Public Sector

CTN :40702459

22 Jul, 2025 NA

Ajmer - Rajasthan

Tender For supply and installation of personal protection system helmet for ortho surgery as per specificati on with two year warranty period [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :40566422

18 Jun, 2025 NA

Hazaribag - Jharkhand

Tender For corrigendum : providing of custom bid for services - annual maintenance contract of ge sas and protection system supplied at 220kv switchyard, ntpc, chatti bariatu coal mining project jharkhand on oem/oes basis ms ge vernova t&d india limited (oem)

Central Government/Public Sector

CTN :40710030

18 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For biennial service contract for fire detection and protection system at ntpc unchahar.

State Government

CTN :40475052

16 Jun, 2025 23.03 Crore

Chandrapur - Maharashtra

Tender For corrigendum : : providing & fixing of ese [(11kv lighting arrester) (oem)] lightning protection system at highly lighting prone area of midc chandrapur

Night Vision Goggles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors