Tender For supply of water lelvel sensor(tank)withouttlccontr general specifications of mm n0-4 6200011 water level sensor(tank) without tlc controller 1. lengthofwire:8 meters the sensor com es with an 8-meter long wire for connecting to a control system. 2. service: suitableforraw,effluent,a ndwastewater - this sensor is designed to be used in various types of water,including raw water,effl uent,and waste water. 3. floattype:float(floatprotectionasperip68) - the sensor utilizes a float,and it provides protection in accordance with ip68 standards,indicating it is highly resistant to dust and wat er ingress. 4. terminalenclosure:castaluminumip66 - the terminal enclosure is made of cast aluminu m and has an ip66 rating, which means it is protected against dust and powerful water jets. 5. numb eroffloats:three - this sensor employs three floats for accurate levelmeasurement. 6. switchtype:t wo-part(probe+remotecontroller) - the sensor's switch system consists of two parts: a probe and a r emote controller. 7. probe enclosure x conduit connection: cast aluminum ip66 xpg11 cable gland - the probe enclosure is made of cast aluminum and has an ip66 rating. it is equipped with a pg11 ca ble gland for secure cable connection. 8. process connection moc : cs(carbon steel) - the material of construction for the process connection is carbon steel. 9. process connection size & type: other s - the specific size and type of the process connection are not detailed in the provided information.t his should be clarified with the manufacturer or supplier. 10. electrode type : flexible - the sensor u ses flexible electrodes for levelmeasurement. 11. electrode moc x insulation: ss316(stainlesssteel3 16)x pvc - the material of construction for the electrodes is stainlesssteel316, and they are insulate d with pvc. 12. number of electrodes : four(3levels) - the sensor employs four electrodes to measur e three different levels within the tank. 13. pressure connection (pr.cn) : 40nbbs-10tdflange-cs - the pressure connection is a40mm nominal borebs-10 table d flange constructed from carbon steel. 14. material of construction (moc): ss316(stainlesssteel316)xpvc - the primary material ls used in t he construction of the sensor are stainless steel 316 and pvc. 15. pressurerating(prrtg):5 kg/cm2 - the sensor is designed to withstand a pressure rating of 5 kilograms per square centimeter. 16. ma ximum temperature : 70 c - the sensor can operate in environments with a maximum temperature of 70 degrees celsius. 17. switch: cns probe - the switch used in the sensor is referred to as the cn s probe. 18. l:8000, l1:8000, l2: 8000, l3 :8000 - these values indicate the length of wire or cable used in the sensor, which is 8 meters. ]
Tender For supply of measuring steel tape , combination plier insulated , screw driver insulated , electrician screw driver thin stem , heavy duty screw driver insulated , punch centre , knife double bladed electrician , neon tester , steel rule graduated both in metric and english unit , hammer, cross peen with handle , electrical symbol and accessories charts , pipe vice cast iron with hardened jaw open type , hand vice , hacksaw frame - with blade , file flat , file half round , file round , pliers long nose insulated , pliers flat nose insulated , pliers, round nose insulated , d.e. metric spanner double ended , gauge, wire imperial stainless steel , portable electric drill machine , crimping tool , pliers side cutting , wire stripper adjustable length , hammer, ball peen with handle , scriber - knurled centre position , tool kit box or bag portable , allen key - mm , allen key - inch , scissors blade , electrical loads- set of incandescent lamp, tube light, cfl, led light, heater and geyser , wire cutter and stripper , earth plate - copper plate , earth plate - gi plate , earth electrode , tap set , trolley for transportation of batteries , die for threading , electrical wiring and switch gear rack , protective relays and contactors rack , mccb , elcb , rccb , fuses , cables - 1 mtr each , three core wire , battery cable , hacksaw blades , bolts, nuts, washers , solar insulation meter , pyranometer , pyrheliometer , lux meter , magnetic flux meter , temperature controlled soldering iron , sun shine recorder , weather monitoring station , solar cell based sunlight radiation meter , cut models of photo voltaic cell assembly , cut model of lead acid battery , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstrator kit , solar pv e-learning software using animations for training , motorized bench grinder , solar photovoltaic module , solar charge controller with dusk to dawn automatic switching , array junction box , solar lantern with suitable solar panel , home light system , solar cell kit , clinometer for angle measurement , anemometer , a.c. voltmeter , volt meter , ammeter mc , ammeter mc centre zero , power factor meter , a.c. energy meter , kilo wattmeter , digital wattmeter , frequency meter , dc led lamp , dc pump , pwm controller , mppt charge controller , solar pcu off grid , solar street light , solar, wind and hybrid power plant , solar traffic light , used water treatment solar plant demonstrator kit , solar dc pump , rechargeable battery , led lights , rubber gloves , cotton gloves , gum boots , safety goggles , safety helmet , first aid kit , working bench , wiring board , metal rack
Tender For bid to ras corrigendum : supply of wireless datalogger for temperature measurement , wired datalogger for temperature measurement , teflon coated thermocouples , low temperature measuring probes ( range up to 150 degree c) , high temperature measuring probes ( range 100 degree c to 400 degree c)
Tender For supply and installation of an upgrade of cryogen free variable temperature cryostat from cryogenic limited u.k. to a cryogen free measurement system.
Tender For supply & testing of thermal imaging camera with all accessories. the thermal imager with la ser pointer shall have following features: i) measuring range: -20'c to 550'c (or higher range) ii) quick start, fast temperature measurement, automatic signaling of exceeded alarm threshold, saving ir images to sd c ard, built-in li-ion battery with 5-hour working time (or higher capacity). iii) power supply: li-lon battery, (o perating time >16 hours), built-in charger, (charging time <2.5 hour), ac adapter 110-230 v, 50/60 hz. iv) interfaces: usb type c, sd slot. v) detector resolution: 256 x 192 /12 um vi) sensitivity: 45 mk vii) frame r ate: 25 hz built-in features: visual camera 5 m.pix, led flashlight, laser pointer measurement adjustment: a djustable distance, ambient temperature (reflected) viii) image file format: jpg ix) housing: ip54 x) accesso ries: usb charger, type c usb cable, 16 gb microsd card, wristband, declaration of verification. xi. calibra tion certificate with accreditation (category reference -sonel kt 165), make- sonel, bosch, fluke, testo [ w arranty period: 30 months after the date of delivery ]
Tender For supply of instruments as per nit documents-, lcr-series- resonant frequency impedance at resonance -quality factor and band width, , make: de tech, , to study the response curve of a series lcr circuit and determine its (a) resonant frequency, (b) impedance at resonance, (c) quality factor and (d) band width, , to measure the voltage across the inductance (l), capacitance (c) & resistance (r) of a series lcr circuit for different frequencies of the input voltages with the help of an ac millivoltmeter & hence 1) to study the variation of impedence of l & c with frequency of the impressed voltage, 2) to draw the resonance curve of the series lcr circuit & to determine the q factor of the circult., , complete with audio oscillator sine wave 0-10v p-p 10khz with digital frequency counter, digital ac voltmeter, digital ac ammeter or voltmeter, digital frequency counter, different values of l, c & r. complete in all respect with detalled manual., , multimeter, digital. low cost heavy duty reliable for student use, , make: imported, , to measure v, i, ohms, transistor hfe, continuity check, diode check. low cost student model., , digital multimeter, lcr model:451, , peak hold facility, , display: 3-1/2 digital 1999 counts backlit lcd low battery and overload indication confirms to iec1010 standards, , auto power off, , dc voltage: 0-200mv/2v/20v/200v/1000v accuracy: +0.5%, , ac voltage: 0-200mv/2v/20v/200v/750v accuracy: 0.8%, , dc current: 0-2ma/20ma/200ma/20a. accuracy: 0.8%, , ac current: 0-2ma/20ma/200ma/20a. accuracy: 1.0%, , resistance: 0-200/2k/20k/200k/2m/20m/2000m.ohms accuracy: 0.8%, , capacitance: 0.20nf/200nf/2uf/20uf/200uf accuracy: 2.5%, , frequency: 0-2k/20k/200k/2m/10mhz accuracy: 1.0%, , inductance: 0-2m/20m/200m/2/20h accuracy: 2.5%, , temperature: -40c-1000c accuracy: 1.0%, , diode test, transistor test and audible continuity test facility., , apparatus for determining variation of thermo emf of, , thermocouple using temperature difference of two junctions, , make: de tech model: dt-temf, , potentiometer with jokey[10 no wire] power supplies:, , dc supply ic regulated +2/4v dc, 500ma. meters: digital voltmeter dc (dual range) digital ammeter dc (dual range) digital galvanometer, , as null detector components are mounted on the panels are: 2 dial decade resistor box on board., , salient features:, , front panel built with high class insulated printed circuit board sheet with well printed circuits and symbols., , instruction manual., , connections are brought out through 4mm colored sockets., , patch cords 4mm., , the trainer is housed in abs plastic cabinet. size of the trainer set 12"x10" accessories with trainer:, , 10 wire potentiometer electrical kettle constantan thermocouple glass beaker thermometer, , set up to determine the co-efficient of thermal expansion of a metal by optical lever & traveling microscope., , make: de tech, , complete experimental set. 1.pullinger's apparatus, , two 1 meter long concentric pipes fitted on a wooden bracket with metal base. outer pipe is covered with asbestos rope & has arrangement for thermometer holes & also steam inlet & outlet at upper & lower ends. supplied with 1 meter long aluminum & steel rods of 1/4" dia. to be inserted inside inner tube., , study of vi and power curves of solar cells, and find maximum power point and efficiency, , to draw v and i characteristics of solar cell and find maximum power and efficiency., , the apparatus consists of optical bench with uprights (length: 1 mtr), cell mounted, meters are fitted on panel with power supply and lamp house with power supply., , measurement of stefans constant using black body, , radiation., , make: de tech model: dt-sbbr, , measurement of stefans constant using black body radiation., , complete with stefans conatant apparatus, very high sensitive light spot galvanometer with sensitivity control, high quality thermocouple.3 it cu boller, rubber tube, electrical heater w
Tender For dental equipments / instruments - 3 point articulator/plane articulator (mean value articulator), acryliser programmable preheating time & temperature programmable curing time & temperature analog control unit capacity-6-8 flask digital programming, adson tooth forceps 5 , adsons tooth forceps 8 , advance digital microscope with imaging software (with desktop + printer + ups + mouse) optical system- infinity color corrected optical system observation tube: seidentopf digital viewing head, 3.2 million pixels high resolution camera system resolution ratio 2048*1536 pixels, line by line scan eyepiece: high eye point wide field plan eyepiece pl10x/20mm, with 5 degrees diopter control, ipd: 50-75mm objective: plan achromatic objective 4x plan achromatic objective 10x plan achromatic objective 40x spring plan achromatic objective 100x s, oil nosepiece: backward quadruple nosepiece illumination- main supply 100v-240v, 3 watt led lamp or 6v/20w halogen with intensity control (fixed center focusing adjustment: coaxial coarse and fine focusing adjustment, with limited and tension adjustment coarse adjustment range: 25mm fine adjustment precision 0.002mm. condenser: n.a.1.25 condenser (with socket for phase contrast and dark field sliders) stage: coaxial mechanical stage 140x132mm size and 76 50mm travel range. inbuilt microscopic scientific digital camera with imaging software consisting of: high resolution digital camera with 1/2 cmos chip usb 2.0 pc connection real time live image resolution: 3 mega pixels electronic shutter exposure time: 1ms-0.3s working temperature: -20 c ~ 70 c image analysis software: sportily calibration line measurements for distance, length, width, perimeter, angle, three point radius. area by enclosed line controlled by four arrow keys available on the keyboard arrow with zoomed preview the line measurement is not affected on zoomed images. identification of objects in an image, count them, obtain several features measurements. objects identification by user or automatically. user defined classification on basis of size or intensity. manual, auto bright and auto dark methods to identify intensity range defined object to be measured. various calculation & measurements available for selected particle are; dimensions, area, perimeter, ferrite length, min/ max radius, thread length, thread width, fiber length, fiber width. roundness, shape, orientation, elongation, equal circular diameter, equal sphere volume, data export report generating and print out interactive file format., agate spatula, air conditioner, air purifier, airotor cartridge suitable for nsk airotor hand piece, airotor control box with inbuilt micromotor , 3 way syringe & 02 nos. airotor control with trolly, airotor hand piece (chuck), airotor hand piece noiseless ultra push type with ceramaic bearing super torque head, airotor oiling machine, alcohol torch with adjustable flame, alginate mixing spatula, allis forcep 5 , allis forcep 6 , alloy cutter compact alloy cutter with high speed grinding and dependable trouble free operation with vaccum suction safety glass for glare elimination and visual protection 20000 rpm, amalgam carrier, amalgamator, anesthesia machine (boyle apparatus) 1. ms & aluminum combined structure with polyurethane coated finish for long life. 2. forged body regulators for medical oxygen & nitrous oxide for maintenance free operation. 3. two numbers each forged yokes with ss fittings for medical oxygen & nitrous oxide at the sides. 4. colour coded yoke mounted high pressure gauges. 5. two tube rotameter with oxygen ratio controller with unitized rotameter. 6. magill s breathing system one number in addition. 7. bain s breathing system one number in addition 8. safety features : oxygen failure warning device (ofwd) nitrous oxide cut off in the absence of oxygen oxygen ratio controller 9. large diameter castor wheels with individual brakes at front castors 10. one year standard warranty 11. local s
Tender For wheel diameter gauge model wd-2 (e) with digital display for measurement of wheel diameter in both mounted (in situ) and unmounted wheels of track machines. specifi cation: - (1) measuring range: - 650 to 1250 mm (2) accuracy: +/- 0.2 mm (3) applicability: - b g wheels (4) resolutions: - 0.1 mm/0.01 mm /0.001 mm (selectable) (5) measurement at distance of edge: - 63.5 mm (6) distance between axes of ball base: - 250+/-0.5 mm (7) display: - wireles s display on android 7 segment led/lcd (8) power supply: - inbuilt rechargeable battery (9) operating temperature: -10 degree celsius to 60 degree celsius (10) operating humidity: - 15 -85% (no condensation) (11) storage of data: - wireless data transmission with unlimited d ata storage (12) measurement scheme: - 3 point measurement of curve using linear encoder (13) carrying case: - padded ruggedized pvc carrying (14)case functionability: - measureme nt of wheel diameter is possible for loose wheel set as well as without dismantling wheel set. (15) recording of readings: - optional facility on android/device (16) data transfer: - t hrough wireless. part make: pie/ mitutoyo/ hy tech [ warranty period: 30 months after the date of d elivery ]