Latest non returnable valve Tenders | Government non returnable valve Tenders

corporations/Associations/Others

CTN :40989416

04 Aug, 2025 289.00 Crore

Jaipur - Rajasthan

Tender For corrigendum : e-bid for rate contract cum supply and empanelment of surgical and suture items(rate contract for the period ending on 30.09.2027) -, linear cutter 55mm with six rows, 3d staple formation, option of closed staple height of 1.5mm/1.8mm/2mm in one cartridge only, , linear cutter 75mm with six rows, 3d staple formation, option of closed staple height of 1.5mm/1.8mm/2mm in one cartridge only, , curved green cartridge having close staple height of 2.0 mm, tactile feedback on completion of firing sequence, new anvil, knife with every catridge, , circular stapler 33mm with controlled tissue compression or dst technology with, longer staple leg 4.5 mm to 5.5mm, fixed or tilt top anvil, available in various shaft sizes std. or xl for deeper access, usfada approved, , laparoscopic cartridge for stapler 60 mm blue, 1.5 mm closed staple height with gripping surface technology and six rows compatible with all range of endoscopic linear cutter 60mm, , laparoscopic cartridge for stapler 60 mm green, 2.0 mm closed staple height with gripping surface technology and six rows compatible with all range of endoscopic linear cutter 60mm, , pph stapler 33mm -hemorrhoidal stapler kit consists of 33mm, , hemorrhoidal circular stapler (with fixed anvil, adjustable closed staple height from 0.75 mm-1.5 mm, staple open leg length of 4.0mm -5.5 mm), suture threade, circular anal, , dilator, purse-string suture anoscope, suture for purse string., , optically guided bladeless trocar 12mm with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula to enhance abdominal wall retention, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 150mm length., , optically guided bladeless trocar 12 mm with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer length 100mm., , facial closure device contain -, , optical bladeless trocar with facial closure device comaptible with clear cannula have two side opening meant for uniform port closure, , varied staple height, , reloads/cartridges for 60 mm, , gia instruments with tri-staple technology, with the cutting knife blade incorporated in the reloads itself, with purple varied staple height of 3, 3.5 and 4mm leg length, , varied staple height reloads/cartridges for 80 mm, , gia instruments with tri-staple technology, with the cutting knife blade incorporated in the reloads itself, with purple varied staple height of 3, 3.5 and 4mm leg length, , eea circular stapler purple colour medium thick, triple row with tristaple technology (three row of staple inner to outer row 3.0,3.5 and 4.0 mm with sloped cartridges face in one stapler) diameter 31mm, , linear cutter with varied, , staple height, tri-staple technology-enabled reloads integration with left and right firing knob(both side firing), linear cutter stapler with integrated gap control technology in 80 mm tristaple gia stapler, compatible with tri-staple gia 80 mm open linear cutter reloads/cartridges purpule and black, , wound protector with double ring in medium 5-9 cm, , endo catch specimen removal kit with continuous ring, polyurethane pouch with 34.5 cm shaft length, 10mm with leakproof and impervious material to cancer cells of 0.5 microns/ pretied purse string on pouch usfda approved, , laparoscopic liner cutter without integrated fresh knife with 360*rotation & 0-45* articulation in both direction: for use with cartridges in sizes of 45mm capable of loading all length cartridges on same gun only, , platting for maxillary swing and mandibular fixation surgeries (titanium) plates - 2 mm thickness (2*2) hole drill bit machine with insertion tools would be provided by the rc holder firm as per need of the respective hospital, , platting for maxillary swing and mandib

Central Government/Public Sector

CTN :41275117

11 Aug, 2025 NA

Medak-T - Telangana

Tender For supply of rexroth aventics make valves and cylinders e e - hy8452431856 - 4we-6h73-62-eg24n9k4-a12 dc valve , hy8452440154 - dre 4k-4x-45g24-10n9k4m valve , hy8452431864 - pressure reducing valve zdr6dp2-4x- 75ym , hy8452431872 - pressure reducing valve dr6 dp1-30-75y , hy8452431880 - z2fsk 6-2-1x-2qv check valve , hy8452431899 - relif valve- 0532 002 052 002- 7-67 bar , hy8452431902 - 3_by_2 stop valve 0821 300 932 , hy8452431910 - pressure control valve 0 821 302 404 , hy8452431937 - 5_by_2 valve 0 820 024 085 , hy8452468652 - dir. ctrl vlv 24v dc p.no - 0820027110 , hy8452431945 - short stroke cylinder 0822 010 637 , hy8452431953 - short stroke cylinder 0822 010 697 , hy8452431961 - double acting cylinder 0822 334 509 , hy8452431970 - relief valve 0532 001 006 992-80 bar , hy8452416512 - rexroth pump a10vso 18dfr1 , hy8452440219 - 2frm6 b36-2x-1.5qrv-in0 flow valve , hy8452438907 - 4_by_3 dir. control vlv 4we6d6x- eg24n9k4 , hy8452438923 - 4_by_3 dir. control vlv 4we6j6x-eg24n9k4 , hy8452438893 - nrv-check valve p.no - z2s6-2-6x , hy8452438885 - double throttle valve z2fs6-2-4x-20 , hy8452438915 - 4_by_2 way impulse vlv 4we6d6x-ofeg24n9k4 , hy8442272240 - direction control valve 4we6e6x , hy8452431988 - 4we 6 h62-eg24n9k4 - r900561286 , hy8452431996 - 4we 6 d62-eg24n9k4 - r900561274 , hy8452432003 - 4we 6 e62-eg24n9k4 - r900561278 , hy8452432011 - 4we 6 j62-eg24n9k4 - r900561288 ) /bid number : gem/2025/b/6517435 * /dated: 31-07-2025 & & / bid document 1 / 31

CTN :41242946

08 Aug, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of mt spares =- hose , high pressure hose , direction flasher switch , cable 3250mm , air filter grid , seal rear axle , rear cluster , control repair valve kit , hyd hose pipe , condenser

CTN :41218629

08 Aug, 2025 NA

Bazpur - Uttarakhand

Tender For supply of hydraulic grab spares in sugar mill - spares parst for hydraulic grab - hydraulic hose pipe set, adapter set for grab, bonded seal of all size, hydex coupling no. 48, sleeve for hydex coupling no 48, pin for hydraulic grab complete set, hydraulic cylinder lhs, hydraulic cylinder rhs, bearing of cylinder, bush for cylinder, electrical connector for dcv, seal kit for hydraulic grab cylinder, pressure gauge kit for grab, suction strainer for hydraulic grab, make fhe, air breather for hydraulic grab, make fhe, return line filter for grab make fhe, solenoid coil for dcv of grab 24v dc, direction control valve 24v dc for grab, transformer of hydraulic grab, split pin of grab pin

CTN :41195809

04 Aug, 2025 NA

Sagar - Madhya Pradesh

Tender For supply of copper washer, copper washer 18 dia, silencer, front direction indicator, rubber hose 5-8 id - 100 long, speedometer cable, dual brake valve, mirror assy rear view, shock absorber assy-strut assy, wiper blades, cable assy control, armature motor, relay solenoid eng starter electricals, banjo bolt m26x1.5, banjo bolt, u bolt, door lock assy rh, alternator assy, door full handle-assist handle, pre filter cum fuel water separator, catch assy hood, door trim pannel rh, reservoir assy, air filter primary, fuel hand pump-9001

Central Government/Public Sector

CTN :41227709

05 Aug, 2025 27.0 Thousand

Bikaner - Rajasthan

Tender For supply of ic assy electronic control module , filter assy with head , hose assy filter to supply interface c , o ring direction control valve , relay 12v

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234055

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

Non Returnable Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government