Get complete information related to latest Non Woven Fabrics Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Non Woven Fabrics Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Non Woven Fabrics Tenders.
Tender For supply of furniture at kda office kota (arc) - supply of chair made from ms frame (with powder coated two or more coat painted, 25mm round pipe with 5.300 kg per 20 feet length) with 40 density cushion set & back matty cloth of height 83cm, seat 45 cm x45cm height of seat 45cm without arm as direction of engineer incharge., supply of 4 x2 table with ms frame (with powder coated two or more coat painted pipe frame 6.50kg/per running 20 feet) with 18mm thick mdf board with teak wood beading & edge rounding as direction of engineer incharge., providing revolving chair having following specifications : seat/back assembly : the seat is made up of 12mm thick pressed plywood, upholstered with fabric and moulded polyurethane foam the back is made up of two piece injection moulded form. the inner frame is upholistered with mesh fabric and mounted on the main assembly. the back has adjustable lumber support for achieving comfortable seating posture.back size : 460mm (w) 580mm (h)seat size : 500mm (w) 480mm (d)overall height : 1010mm to 1110mm (h)polyurethane foam : the polyurethane foam is moulded with density = 48+/-2kg/m3.upholstery : fabric/mesh sample and colour to be approved by engineer-in-charges., supply of visitor chair with pu arm ms frame (with powder coated two or more coat painted, 25mm round pipe with 5.300 kg per 20 feet length) with 40 density cushion set & back matty cloth of height 83cm seat 45cmx45cm height of seat 45cm as direction of engineer incharge., overhead rack 3 x15"x12" with 22 gauge sheet partitions with sliding doors as direction of engineer incharge., locker shelf 66" x22"x20" with 22 gauge whole body (4 nos drawers good quality locking system) as direction of engineer incharge., table with glass on top with 4 nos drawer of size 45x45 cm with mdf board (thickness of top of mdf board 30mm, vertical side 18mm, drawer 18mm) 4 nos. drawer height 55 cm on one side, good quality locking system, laminate with teak wood beading & edge rounding, three sided covered top glass 8 mm thick as direction of engineer incharge.8x4, 6x3, side table size 3.5x1.5x2.5 with key board drawer, one side 4 nos drawer with mdf board (thickness of top of mdf 18mm, vertical side 18mm with 1 mm thick laminate with teak wood beading & edge rounding, three side covered with 8 mm thick top glass as direction of engineer incharge., providing & fixing of executive medium back revolving chair having following specification : seat/back, assembly: the seat/back are made up of 12mm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort.back size :520mm (w) 750mm (h)seat size :520mm (w) 520nn (d)overall height : 1270mmpolyurethane foam : the polyurethane foam is moulded with density = 45+2kg/m3upholstery : fabric/leatherettearm rests: the one-piece of armrest in "d" shape made up of polypropylene sample and colour to be approved by engineer-in-charge, supply of 3 x2 computer table with ms frame (pipe frame 6.50kg/per running 20 feet) with 18mm thick mdf board with teak wood beading & edge rounding, provision of cpu, keyboard tray & ups under table three side covered as per direction of engineer incharge., almirah 3x6 (lockable type-1) 78" x36"x18" with 22 gauge whole body (5 nos partitions ) one portion will have provision of two lockers sample and colour to be approved by engineer-in-charge, almirah 3x6 78" x36"x18" with 22 gauge whole body (5 nos partitions ) sample and colour to be approved by engineer-in-charge, supply & installation conference table size 1000l*6000*750h in mm, table top made of 36mm thick particle board round post form top with 2mm thick pvc edge banded finish with as per approved laminate shade, connection tops of conference table made of mdf board of size 600w x 600d x 25mm round postform pasted with 0.4mm thick black pvc membrane on board, gable - ends of the table made of 25mm thick p
Tender For supply of penta work station - 1500 x 600-legs - metal powder coated legs at the end and shared con dition. system shall also have 120 mm high powder coated standalone panel legs to give the system an ele vated look. split tiles on main spine combination of two finishes for the top tiles on the user side shall be s plit fabric tackable along with split white board. wire management through main spine-wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through conce aled conduits inside the blocks. worksurface - out of 25 mm thk prelam particle board with flat pvc lipping e dge banding of size 1500 mm w2 x 600 mm d. [ warranty period: 30 months after the date of delivery ]
Tender For purchase of office furniture and other allied items - mingle modular plt conference table 14 seating head - w:1800mm x d850mm x h:740mm , 2str : w:1350mm x d:600mm x h:740mm, 1str : w:675mm x d:600mm x h:740mm work surface:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. plastic abs access flap is provided for easy access to wires and cables. work top is available in various shapes as shown above understructure:it consist of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 - wp profile is used for connecting panels together. the product has a knock-down construction modesty panel made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it is made of 0.8mm crca as per is 513,epoxy polyester powder coated (dft 40-60 microns). wire management - an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. accessories are provided for adding functionality to the products. document shelf is made of 1.2mm crca ms is:513 and is epoxy polyester powder coated (dft 40-60 microns). it is to be used for storing papers and accessing them quickly. hdmi wire cover is made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). hdmi holder is made of 2mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). the hdmi wire cover along with hdmi holder (part of same packet) to be booked for every provision for hdmi connection as per customer/av team requirement (except in head and corner module). name plate is provided to display the name of person and consists of two plates - inner and outer plate. they are made of 1.2 mm aluminium sheet and 2mm aluminium sheet respectively. they are tack welded to each other using tungsten inert gas welding. the name plate is epoxy polyester powder coated (dft 40-60 microns). product certificates : test certificate, indoor advantage™ gold, griha and greenguard., mingle unitized plt_10 seater st w:3000mm x d:1150mm x h:740mm work top:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. access panels provided with soft closing hinges. understructure:the under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product has a knock-down construction. wire raiser:a wire raiser made of 0.8mm crca ms is:513. it is epoxy polyester powder coated (dft 40-60 microns) for flow of wires and cables. cutout provision below access flap at two locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables (eg.hdmi, vga-a,etc)., thrill mesh plus highback chair seat/back ass embly: the seat is made up of 1.5 ±0.1 cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered with mesh fabric. the back consist of adjustable lumbar suppo
Tender For supply of pvc spiral hose with continuous spring steel wire d d - silicone coated glass fabric with an embedded steel wire helix outer twin glass cord flexible hose of 100mm nominal diameter and 4m length as per specification , silicone coated glass fabric with an embedded steel wire helix outer twin glass cord flexible hose of 150mm nominal diameter and 4m length as per specification , silicone coated glass fabric with an embedded steel wire helix outer twin glass cord flexible hose of 200mm nominal diameter and 4m length as per specification , silicone coated glass fabric with an embedded steel wire helix outer twin glass cord flexible hose of 300mm nominal diameter and 4m length as per specification , pvc spiral hose with continuous spring steel wire reinforcement helix on the outer periphery covered by pvc extruded wear strip of 100mm as per specification , pvc spiral hose with continuous spring steel wire reinforcement helix on the outer periphery covered by pvc extruded wear strip of 150mm nominal diameter and 10m length as per specification , pvc spiral hose with continuous spring steel wire reinforcement helix on the outer periphery covered by pvc extruded wear strip of 200mm nominal diameter and 10m length as per specification , pvc spiral hose with continuous spring steel wire reinforcement helix on the outer periphery covered by pvc extruded wear strip of 300mm nominal diameter and10m length as per specification
Tender For supply of multimeter and other instrument - wire multistrand 1.5 sq.mm., cu, pvc, black, 250102 2.5 mm2 single core pvc wire, pvc tape red, pvc tape yellow, pvc tape black, pvc tape blue, cotton tape, mica tape, glass tape, teflon tape, isophalate varnished polyster fabric tape, fiberglass tape, thickness: 0.13mm, width: 25mm, insulation level: 25kv, suitable for insulation of termination between stator lead and terminal box bushing of ht motors. (1 roll = 50 meter length), isopropyle alcohol, panasonic br-2/3a rechargeable li-battery 3 v, br17335 along with connector (ref no- 990xcp98000), rubber paint, split pin 3x45mm, pin type 10sqmm copper lug, copper lug pin type 1.5 mm2, insulated, 220v dc led indication lamp-green, led indicatin lamp red dc, crc -2-26. 500 ml, crc-co contact cleaner,300 ml cane, crc qd contact cleaner 250ml, ss hose (bellow) pipe with ss brading having ss union socket with end fitting at both sides, dimensions: length-1 meter, hose pipe dia- 20mm (excluding brading), air filter regulator range 0-2 kg/cm2 with pressure gauge 0-2.5 kg/cm2, air filter regulator range 0-7 kg/cm2 with pressure gauge 0-10 kg/cm2, flexible (rubber) hose pipe 14 mm. as per sample, ss male fitting with ferrule 6mm ss tube, 6 mm ss tubes, copper lug pin type 1.5 mm2, insulated, cu lugs (u type) for 1.5 mm2 cu cable, seal kit for id fan actuator (as per sample), seal kit for fd fan actuator (as per sample), seal kit for 12" bore power cylinder of pa fan (as per sample), lead coated bolt opzs battery (as persample), intercell connector lead coated for opzs battery (as per sample)