Latest nylon cord Tenders | Government nylon cord Tenders

Central Government/Public Sector

CTN :45117171

18 May, 2026 NA

Jodhpur - Rajasthan

Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of 07 item 1:-epoxy zinkphosphate primer ( two pack ) to chapter ii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 52 ltrs. 2:- unsaturated polyester based knifing putty colour white ( two pack ) chapter iii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 40 kgs. 3:- pu surface white ( two pack ) chapter iv of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 34 ltrs. 4:- pu paint beige finish ( two pack ) colour shade ral 0708040 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 44 ltrs. 5:-pu paint maroon finish ( two pack ) colour shade ral 0303045 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 05 ltrs. 6:-thinner compatible with pu paint. qty. per kit 50 ltrs. 7:-thinner for epoxy paint compatible with epoxy primer & putty. qty. per kit 20 ltrs.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]

CTN :45091395

13 May, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of kit for injection moulded high performance polyamide (hppa) brake gear bushes to rdso spec. no. rdso/2009/cg -17 (rev. 3) or self lubricating polyester resin based composite brake gearbush to rdso spec. no. c - k605 (rev. 3) to rdso drg. no. sk-81039 alt-15 as per following list. sr. no. 1- size of bushes d = phy 42 x phy 32 x 20 mm item no. of rdso drg. sk-81039 alt.15 item no. 2 qty/kit in nos. 60 sr. no. 2- size of bushes d= phy 42 x phy 32 x 32 mm item no. of rdso drg. sk-81039 alt.15 item no. 3 qty/kit in nos. 26 sr. no. 3- size of bushes d= phy 70 x phy 57 x 25.5 mm item no. of rdso drg. sk-81039 alt.15 item no. 7 qty/kit in nos. 16 sr. no. 4- size of bushes d= phy 32 xphy 23 x 20 mm item no. of rdso drg. sk-81039 alt.15 item no. 11 qty/kit in nos. 04 total no of bushes per kit qty. kit in no. 106. [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :45077863

04 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For manufacture and supply of 10mm thick nylon cord reinforced grooved rubber sole plate for tws 60kg 1 in 12, 25t axle load to rdso drg.no.t-9790 alt-1 for placing beneath rails with latest alterations if any upto the date of tender notice, conforming to irs specification t-55-2025 for rail pads as per item specific guidelines & schedule of technical requirements for manufacture and supply of rail pads (tdg 0042 rev.'0') with latest amendments if any, upto the date of tender notice. the list of items to be supplied in a set is given inannexure-i.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max8 lacs ]

Central Government/Public Sector

CTN :45077849

03 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For manufacturing and supply of 06 mm thick nylon cord reinforced grsp for placing beneath rails at turnout conforming to rdso drawing no. t-4218 for 1:12/60 kg. turnout with or cs to irs specification no. t-55-2025 (revision-01) . the alt. in drawing and specifications issued by rdso up to 30 days prior to tender opening date shall be applicable in this tender. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45077832

25 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of densified thermal bonded polyester block cushion for transverse middle & upper berth of iii tier coaches (bg & mg) to size 1880 x 555 x 25mm to rdso str no.c-k 607, (rev.1) with amendment no.2 of january-2010 except clause 3.1(a) of section -a. note: 1. item to be procured from icf approved vendors. 2. 2nos cushions sample must be supplied for approval before bulk supply. 3. test certificate and related documents must be attached at the time of tendring and supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :42424475

04 May, 2026 NA

Kendujhar - Odisha

Tender For bid to ras supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall dia

CTN :45049533

14 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of kit for injection moulded high performance polyamide (hppa) brake gear bushes to rdso spec. no. rdso/2009/cg -17 (rev. 3) or self lubricating polyester resin based composite brake gearbush to rdso spec. no. c - k605 (rev. 3) to rdso drg. no. sk-81039 alt-15 as per following list. sr. no. 1- size of bushes d = phy 42 x phy 32 x 20 mm item no. of rdso drg. sk-81039 alt.15 item no. 2 qty/kit in nos. 60 sr. no. 2- size of bushes d= phy 42 x phy 32 x 32 mm item no. of rdso drg. sk-81039 alt.15 item no. 3 qty/kit in nos. 26 sr. no. 3- size of bushes d= phy 70 x phy 57 x 25.5 mm item no. of rdso drg. sk-81039 alt.15 item no. 7 qty/kit in nos. 16 sr. no. 4- size of bushes d= phy 32 x phy 23 x 20 mm item no. of rdso drg. sk-81039 alt.15 item no. 11 qty/kit in nos. 04 total no of bushes per kit qty. kit in no. 106 [ [ warranty period: 24 months after the date of delivery ]

Central Government/Public Sector

CTN :44821076

07 May, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : supply of bush 42x32x20mm long for brake gear of icf coaches item 2 of rdso sk-81039 alt.15 rdso spec.rdso/2009/cg-17, rev.1 of june 2011 (hppa) (or) rdso spec.c-k 605, rev.1 of aug.09 with amendment no.1 of mar.10 (self lubricated polyester resin). as per drg.no. sk-81039 specn: c-k605. (rev-1) amend.no.1 of march-2010 (or latest) or spec.no. rdso/2009/cg-17/ (rev-1) of june 20 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44969191

22 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of densified thermal bonded polyester block cushion for transverse lower berth of lhb coaches to size 1814 x 595 x 50 mm as per item no: 6 of rcf drg no: ls61177 alt - nil and rdso spec no: c-k607 rev 2 of dec 2015 amd no: 1 of aug 2016. as per drg.no. rcf drg no: ls61177 alt - nil specn: spec no: c-k607 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45038157

22 May, 2026 NA

Bhavnagar - Gujarat

Tender For supply of densifieed thermal bonded polyester blocks for single seat,as per hq/ccg drg.no.-c/sk-470/h,alt-3 item no.-2 material confirming to rdso specn. -c-k 607 (rev-2)dec.-2015, with amnd.slip no.1 of august-2016, std ir totem, manufactures initials compulsary . specn: tcn-6-1 817no2 [ warranty period: 30 months after the date of delivery ]

Nylon Cord Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors