Latest nylon nut Tenders | Government nylon nut Tenders

CTN :40704392

07 Jul, 2025 NA

Srinagar - Jammu And Kashmir

Tender For bid to ras supply of bowl oil filter element , oil seal (id 155.73.od 182.86 w 15.87 , hydraulic jack with handle 12 ton cap , seal front , horn assy low tone , spanner deac 19x22 , sash door rear rh , unloader valve , cover boot , screw set idle adjust , regulating glass rh , nut , rear protector bumper corner lh , gasket cyl head , assy hose , o ring distributor case , boot , o ring , assy of turn signal rh , nylon nut m8 , bearing angular (drive shaft) , selector shaft , door lock rear gate , assy engine lamp , wheel nut spanner , wooden scotches/block , crank shaft oil seal guide , universal joint assembler , spring brake actuator type 24 lh , yoke reverse shaft , rear axle remover , door operating handle mech right , valve intake , s/a of vane coolant pump , rectifier , bracket (battery cable)

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

Central Government/Public Sector

CTN :40945059

25 Jul, 2025 NA

Vadodara - Gujarat

Tender For vadodara division :- providing and fixing single piece spring inserted reusable self locking steel nuts for sizes (m-25) and (m-27) under the jurisdiction of special repair den south brc. (re-invited) (r-1).

CTN :40491967

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 23bx9c002 asd16 gear box - pin cotter prop twin disc , pin cotter prop twin disc , o ring , transom anode , cable trim twin disc , cable steer twin disc , lvdt trim cyl , clamp , pin cotter , cotter pin , pin cotter , potentiometer , anode transom twin disc , anode t tube for arneson asd11 , drive bearing kit bearing replacement , nylon nut , seal , seal , anode for flaps , trim tabs indicator fixing cable twin disc , bsc trim tabs system including 1 pair of blades flaps hinges , exchanger heat

Central Government/Public Sector

CTN :40872529

18 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of hex head bolt with nylon nut m-24x130x90 to is:1367 s 8.8 steel and nylon 66 with a t hrough hole of 6 mm dia distance of 10 mm from free end. it is used in axle box of wag-7 & wap-4 loco . [ warranty period: 30 months after the date of delivery ]

CTN :40843788

17 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of et3370b 1005927 transom anode , et3370b 1009358 t tube anode , et3370b 1018533 nylon nut , et3370b ia390 20 01 000 controller card

CTN :40567846

08 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of lock washer , seal imperviousness , ball bearing 6309-c3 drive end , shaft seal drive end , seat , nut , plug , v-ring , seat , nut , plug , v-ring , wave washer for axial displacement , single male coupling , drive shaft 417-35/25-575/20-19/19- 107 , bushing d252/32h11x5 , threaded pin m5x10 (d32x15) , shank screw m5x12 , heat protection housing 425x233x245 , heat protection butterfly371x175x12 , distance piece 371x605x23 , butterfly gasket l920 , butterfly gasket 8/8x970 , flange gasket d4xl1290 , flange gasket d7xl1210 , washer head screw m8 l10 , slide disk d36/16x2 , bushing 25e8/32r8x20 , flange bushing 25e8/32r8 , heat protection butterflyd334x12 , distance piece d337/280x23 , heat protection housingd411/345x245 , butterfly gasket l 950 , butterfly gasket 8/8x1020 , flange gasket d7xl1210 , flange gasket d7xl1260 , stop dn350-1000 , flexible sleeve for square duct 00965m2 , standard safety washer de10 , stf33-02-v002e-v-h-m16x60x60 screw m16x60x60 cl8-8 , stf3302/v002/v/h/m8x16x16 screw h m 8x16x16 88 b198 , stf33-02/ve010/tdp/m16x135eq studs rods m16 x 135 with nuts , stf33-02/ve010/tdp/m27x168eq studs rods m27x168 with nuts , lock washer , lock washer , lock washer vs6 , lock washer , stf33-01-01-030-sb-2deb-dn400 circular sleeve diameter 400 , module o-ring , body and bonnet bearing stb nd6 , o-ring 8x2 , ball bearing 6209-z-c3 non drive end , cylindrical pin 12x28 aci , screw h m 10x25x25 steel cl 88 , c-shaped flanged cable guide , closing strip , chain end attachment , bushing , chain support , output cable clamp , input cable clamp , lower cable clamp , intermediate cable clamp , upper cable clamp , cylindrical pin 4 m6x10 , pre-load elastic washer , balls bearing (soc) , balls bearing (cs) , quad ring seal 9000x533 64c8 , oil beri instrumentation birkholz bottle 025l , screw hm24 200-60 cl12-9 , screw h m8 110x33 88 , e25114b140q30qvacmm1-4x30x30 screw h m14x30x30 cl8 , screw h m 5x12x12 88 b198 , screw c m 10x25x25 cl88 , cupro-alu screw h m5x10x10 , chromated nut h m12 6 , washer m 30 u z2cnd17-12 , lock tab washer , en24033m20-10-en12329-zn25-c-fe nut hhm20 (steel class 10) , screw h m16x70x38 cl 8-8 , screw h m 12x100x30 , eniso4017-m12x40x40-8-8-a2c nuth m20 cl8-8 galvanized bichro , steel screw h m 6x20x20 cl 8-8 , screw h m6x30x30 stainless steel a4l-80 , chromated nut h m 16 cl8 , screw chc m16x45x45 stainless steel a4-80 , screw h m12x45x45 ss a4 b197 , screw h m12x60x30 88 b198 , steel screw h m16x60x38 88 , screw h m10x60x60 88 b198 , screw h m4x10x10 ss , screw h m8x30x30 cl8-8 , pin v2-20(2673-020) , bare steel threaded rod m12x1000 , square ruch threaded adaptor , serrated lock washer (soc) m65 , serrated lock washer (cs) m70 , seal od34 id225 , nylon thread d2 , screw hm 16-70/38 , thick washer z16 , rectangular locking plate , pin v4 - 35 , pin v6 - 55 , pear lug cal 6 , polyamid braided rope d6 length 0m700 , nord-lock washer nl8 , lock wire a-l-d , scraper 14 x 155 x 1 , terminal connection , seal imperviousness az6 , serrated lock washer m25 , seal for adaptator od269 , gasket 495x375x3 , finger plate , spring pin d4-16 steel , bonded seal a400-324-a4 , seal aor- 2037pe/75 , seal aor- 21x2 pe/75 , seal aor- 3106pe/75 , gasket nylon 8x55x15 , blanking piece , o-ring , spring , friction ring , o-ring , ring , washer , gasket , washer nd 14 , spring washer stb nd65 , bearingwasherthrust , spring , spring pin e 5-35 , body seal , seat , packing follower , lock washer , o-ring r51 , spring pin e4x40 - cut to 13 mm , pin v15-15 inox (2672-015) , lockwire ald (695011-060) , o-ring 28x265 20a8 (8558-723) , o-ring 600x180 (8531-823) , o-ring 285x265 20a8 (8556-723) , lock plate 12 z3cn18-10 (1780-112) , o-ring 487x180 20a8 (8526-923) , lock plate diam m5 inox (1107-124) , o-ring 7557x533 20a8 gn , lock washer , lock washer , relay 4rt 2a 28vdc (p) , relay2rt 10a 28vdc suppressed devicesaphir code rel005appar , o-ring 600x18 64c8 , safety washer steel nl12-195-25 delta-protekt ,

Central Government/Public Sector

CTN :40773560

09 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with continuous gas w

CTN :40792627

11 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For construction material and structural material of a at shelter c c - 2400 mm , sunshades of size 1500mm x 500mm shall be provided for outside windows oblique doors , eaves board as per requirement will be provided in each shelter as shown in drawing , foundation bolt 25mm dia and 600mm long welded with bottom anchor plate of size 250mm x 250mm x 10mm and fixed with bottom base plate of column using nuts and bolts , anchor fastner as ms tubular hooks of dia 100 mm and thickness 16mm , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , rivet full size , self tapping screw 100 mm long , self tapping screw 75 mm long , star screw 15mm long , star screw 25 mm long , star screw 75mm long , auto rechargable led tube light complete set 20w 4feet long with electronic choke , auto rechargable led bulb 15w , angle holder , modular switch piano and flush type 5 amp , bulk head fittings with 8w short body cfl , pvc switch board 8 x 10 inch isi mark , pvc switch board 6 x 4 inch isi mark , pvc casing and capping of size 25 mm , pvc casing capping tee bend , pvc casing capping l bend , wire single core copper conductor 1 point 5 sqmm , wire two core copper conductor 6 sqmm , mcb 10 to 32 amp sp , pvc square box 4 x 4 inch , insulation tape one and half x 25 mtr with isi mark , ceiling rose , change over switch 32 amp , star screw full thread 20 mm each pkt 320 , gi wire 14 swg , earthing of building will be provided using 4mm dia gi set earth wire connecting to main board to gi earth plate of size 60cmx60cmx6mm thick , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , provision of fire extinguisher 6 kgs abc dry powder stored pressure type , locking arrangements with 16mm iron tubular rings of dia 100mm to be provided and fixed in floor , cgi sheet 3000x900mmx0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , pvc pipe 110 mm dia , pvc tee 110mm dia , pvc elbow 110 mm dia of isi mark , pvc socket 110 mm dia , pvc bend 110mm dia , riveting machine with 100 rivets as per isi specification , pan motor tasala 18 inch dia , showel with wooden handle , axes picks 03 kg head with handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , brick hammer 500 gm with handle , water level pipe for mason 100 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel oblique wood cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , hexa blade 350 mm long isi 1st quality , welding rod , welding goggles , welding gloves

State Government

CTN :40756934

02 Jul, 2025 10.04 Lacs

Agartala - Tripura

Tender For supply and installation of some articles to the residential office of the honble deputy speaker, tripura legislative assembly, bardowali, agartala during the year 2025-26 - providing of split type high wall 2.00 tr (rated cooling capacity should not be less than 6,000 kcal/hr or 24000 btu/hr or 7000 kw) split a.c. machine with inverter compressor technology operating on non-cfc refrigerant (r-410a/r-32/equivalent refrigerants) suitable for wall mounting conforming to is:1391 (part-ii) specification (evaporator & condenser must be of pure copper) not less than 3 (three) star rating (latest standard), operates on single phase 230 volt, 50hz, ac supply maximum current drawn 11.0 ampere, including supply of 3.0 mtr copper pipe (both for suction & liquid line), 3.0 mtr 4 (four) core electrical connecting cable, remote control unit in/c batteries, 16 amps power top etc complete, capable of performing a) cooling b) dehumidifying c) air circulation d) filtering as per direction of the engineer-in-charge., standard installation of 1.5 tr/2.00 tr capacity high wall split air conditioner i/c providing of electrical plug top of required capacity, flling up/ repairing of drilled portions by cement mortar, painting etc. as per direction of the engineer-in-charge., fabrication of m.s. platform for placement of condensing unit by using m.s. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c painting, fitting, fixing grouting by cement mixer as per direction of the engineer-in-charge., providing hard pvc pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the engineer-in-charge., supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line between indoor and outdoor units (for 1.5 tr & 2 tr ac) beyond the standard length as per direction of the engineer-in-charge. (if required), providing and connecting electric control cables between mcb to indoor/outdoor. 3c x 2.5 sq. mm copper cable., supplying & fixing of 1200 mm sweep white color ac ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm pvc insulated copper conductor cable(fr) (isi marked, bee 1 star/minimum service value 4.0 m /min/w): -, supplying and fixing of 20 mm dia extra down rod (gi pipe medium guage) with necessary hole for installation of ceiling fan as required., wiring for light/fan/ exhaust fan/ call bell point with 2x1.5 sq. mm pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ walt complete with 6/10 amps modular type switch, cover plate, gl box including necessary connection etc. as required, supplying and fixing of the following modular accessories including necessary connection etc. as required 3/6 pin 16/20 amps socket outlet (2m), supplying and fixing of the following modular accessories including necessary connection etc. as required4 step fan regulator (1m), supplying and fixing of the following modular accessories including necessary connection etc. as required20/25 amps single phase motor starter switch (2m), wiring for circuit/sub-main with the following sizes pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ wall etc. as required, earthing with 40 mm dia g.i. earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top cl cover plate size 12"x 12" having locking arrangement including cc work, holes on earth pipe etc. as required, proving and fixing/drawing of 4.06 mm dia (8 swg) g.i. 10 wire on surface or in existing g.j/pvc/ polythene pipe for loop earthing as required., executive desk with return unit, size: 2100(w)x 2250(d) x 750 (h) mm, executive revolving chair, visitor chair, godrej 4 door bookcase (1742 h x 914 wx 320 d) mm

Nylon Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government