Latest nylon ring Tenders | Government nylon ring Tenders

corporations/Associations/Others

CTN :45676412

02 Jul, 2026 7.71 Crore

Kolkata - West Bengal

Tender For centralized rate contract for two years for supply of various types of spare parts of ms elecon engg. company limited for chp of different plants of dvc. - dowel, part no.-30, type: k2 gear unit, make: elecon engg. co. ltd., drain plug, part no.-45, type: k2 gear unit, make: elecon engg. co. ltd., breather plug, part no.-56, type: k2 gear unit, make: elecon engg. co. ltd., input pinion shaft, part no.-102, type: k2 gear unit, make: elecon engg. co. ltd., input extension key, part no.-107, type: k2 gear unit, make: elecon engg. co. ltd., locknut, part no.-110, type: k2 gear unit, make: elecon engg. co. ltd., lock washer, part no.-111, type: k2 gear unit, make: elecon engg. co. ltd., flanged bush, part no.-120, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-132, type: k2 gear unit, make: elecon engg. co. ltd., output shaft, part no.-202, type: k2 gear unit, make: elecon engg. co. ltd., output gear, part no.-203, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-206, type: k2 gear unit, make: elecon engg. co. ltd., oil seal, part no.-232, type: k2 gear unit, make: elecon engg. co. ltd., intermediate pinion shaft, part no.-302, type: k2 gear unit, make: elecon engg. co. ltd., intermediate gear, part no.-303, type: k2 gear unit, make: elecon engg. co. ltd., key, part no.-306, type: k2 gear unit, make: elecon engg. co. ltd., roller assembly r-800 drg no- r00673/3, for paddle feeder m/c no. 27-30, make-elecon, roller assembly r-600 drg no- r00686/3 , for paddle feeder m/c no.-27-30,make-elecon, geared coupling ed500, propeller shaft series 1600mm part-m08244/1 for paddle feeder m/c no- 27-30, make-elecon, paddle shaft 88diax477 lg part-m13004/4 for paddle feeder m/c. no.-27-30, make-elecon, paddle shaft 88diax812lg part-m13006/4 for faddle feeder m/c no.-20-30, make elecon, coupling for propeller shaft part-m13005/4 for paddle feeder m/c no.- 27-30, make elecon, wheel drive parto-m11031/3 for paddle feeder m/c no. pf-27-30 , make - elecon, keeper plate part-m08596/4 for paddle feeder m/c no.- 27-30, make - elecon, spacer for bearing 89.8/80diax27thk for paddle feeder m/c no- 27-30, make -elecon, cover for bearing 130diax14 thk for paddle feeder m/c no. 27-30, make-elecon, plain wheel dia 160/90x85thk for paddle feeder m/c no.- 27-30, make - elecon, spindle 40 diax210lg part-m08594/4 for paddle feeder m/c no.- 27-30, make - elecon, deep groove ball bearing single row , part no.- m08593/3 for paddle feeder m/c no.- 27-30, make -elecon, filter return line for hydraulic system of paddle feeder pressure relief valve for hydraulic system of paddle feeder, spring, drg. no. m02728/4spare for vibrating feeder,spring, drg. no. m02728/4spare for vibrating feeder, paddle hub with arm, part no. m08456/2 (spares for paddle feeder plough drive assembly of elecon make paddle feeder, m/c no. pf: 27-30), locking plate(spare for paddle drive assy.), locking assy. d0b1kon1012140x190 for paddle drive assy., ci cast housing for extra bearing housing (spare for paddle drive assy. of paddle feeder), spacer 75 od x 55 id x 48 lg (for paddle drive assy.), spacer part no. m13062/4(for travel drive assy.), torque arm for travel drive, spacer part no. m13007/4(for travel drive assy.), boss p no. dc0269414, deep groove type ball bearing (for spacer for d.s. trolley), nylon ring 3thk 125od x80 id for spare of ds trolly assy., pin 80 dia x 235 lg(spare for ds trolly assy.), cover 20/80 dia x 20 thick(spare for ds trolly assy), wheel dia 315 mm(spare for ds trolly assy.), drive gear box (type-c082111)make;pbl without electric motor for ilms, planetary gearbox input sun pinion for elecon make planetary gear box type and size pav 45 ratio-5:1, planetary gearbox set of oil seal for elecon make planetary gear box type and size pav 45 ratio-5:1, annulus (part no.5), of planetary gearbox type:pav-45, ref drg no.7741891/3, planet bolt (part no.8) of planetary gearbox type:pav-45, ref drg no.7741891/3, planet carrier cum output shaft(part n

CTN :45672294

15 Jul, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply of rope cover , corner pads , ring cover nylon , ring stair , ring padding , rope spacer , turn buckle cover set of 16 pieces , ring skirt , ring canvas cover , ring gong , turn buckle long , turn buckles 1 small , ring rope , boxing timer , head guard , cup protector , gum shields , training boxing gloves , free standing bag punch box master usi , boxing shoes , boxing gloves 609m 120z , punching pad leather , punching bag leather with inner chain and swivel , wall pad leather , speed ball platform set , bandages , computerized scoring system cpu monitor and ups , pa system , digital fat analyzer weighing machine , body composition and health analyzer , replacement of wooden planks set , installation of boxing ring , floor mat size 20 x 20 1000 sq ft , standard warranty

Central Government/Public Sector

CTN :45405511

15 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For corrigendum : running contract for manufacture and supply of 10125 mm thick web curved switches with check rails for 25t axle load with complete fittings as per rdso drg. no. t-9791 (alt-02) and spring setting device as per drg. no. t-6216 with latest alteration, including metal liner, pocket type ncr-grsp (10mm thick) but excluding standard fish plates, standard fish bolts & nuts, elastic rail clips, hvn insulating liners. pre-curving of tongue rail & stock rails for turnouts of similar & contrary flexure shall be done whenever required, without additional payment, in accordance with rdso's guidelines of pre-curving issued vide letter no. ct/ptx/tws design dated 27.07.2018. the stock rail shall be in 60e1 rail profile of r-260 grade and tongue rail shall be in 60e1a1 rail profile of r-260 grade as per irs specification no. t-12 and irs specification no. t 10 2025 and irs no. irs no. t 62 2025. " as per note sl no. 27 of rdso drg. no. t-9791, alt-02, "10% quantity (i.e. 1/10th of the quantity of purchase order of 1 in 12 60e1a1-tws) of breakage prone and wear prone spare parts (shown in part-c of rdso/t-9791, alt-02, annexure-b. ) shall be supplied with every purchase order of 1 in 12 60e1a1-tws for replacement of these spare parts as per need during service life of the 1 in 12 60e1a1-tws ".note:- (i) the rate includes cost of stock rails, tongue rails and check rails. note:- (ii) ncr grsp shall be procured from rdso approved vendors only as per irs specification no. t- 55-2025 (revision-1) and with process inspection by rites (non-tpi) note:- (iii) spring setting device shall be procured from rdso approved vendors only as per irs specification no. t- 54 (revised - 2024) note:- (iv) list of fittings is enclosed as annexure-a . note:- (v) list of breakage prone and wear prone spare parts is enclosed as annexure-b. note:- (vi)the lh & rh quantity bifurcation is as under- lh = 400 sets & rh = 400 sets. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45643354

21 Aug, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at fish plated joints to rdso/drg. no. t-10233 & t-10234 (alt.-1) use with psc sleepers (t-2496) suitable to 52 kg rail, and conforming to irs specification no. t-44-2025 (third revision) [ warranty period: 30 months after the date of delivery ][ rate of supply 30000 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45643512

31 Aug, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at glued joints to rdso/drg. no. t-10236 & t-10237 (alt.-1) use with psc sleepers (t-2496) suitable to 52 kg rail, and conforming to irs specification no. t-44-2025 (third revision). [ warranty period: 30 months after the date of delivery ][ rate of supply 15000 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45548622

20 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : fabrication and supply of 6400 mm over riding curved fan shaped switches 1 in 8.5, bg, 60kg. (uic) on psc sleeper as per rdso drawing no. t-4966 with latest alteration and specifications irs:t-10-2025 (with latest amendment i.e. 30 days prior to date of tender opening), complete with all parts including check rails & excluding standard fish plate and bolts, plate screw, e.r. clips, liners, gr pads and insulating liners (list of fittings attached as annexure- c). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] [ rate of supply 30 units per month , commencement time allowed -1 month ]

CTN :45453802

29 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of nylon ring grade 6.6 size- od-174mm , id-151 mm, width-50mm, as per blw drg no-sk23el0971 alt'b' (item no-2, ring) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45603947

29 Jul, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at glued joints to rdso/drg. no. t- 10228 (alt.- 1 ), use with wider psc sleepers suitable to 60 kg(uic)/60e1 rails , and conforming to irs specification no. t-44-2025 (third revision). [ warranty period: 30 months afterthe date of delivery ][ rate of supply 10000 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45184301

08 Jul, 2026 NA

Jaipur - Rajasthan

Tender For corrigendum : manufacturing and supply of 6400 mm over riding derailing switches 1 in 8.5, bg, 60 kg. (uic) on psc sleeper as per rdso drawing no. t-6068 (alt-5) complete, but excluding grsp, insulating liners, ercs, fish plates and fish bolts & nuts, and ir specification: t 10-2025. note-1: this includes cost of all the rails required for manufacturing of this item.note-2:the bifurcation of rh and lhquantity will be advised in coverage purchase order. [ warranty period: 30 months after the date of delivery ][ rate of supply 24 units per month , commencement time allowed -1 month ]

Central Government/Public Sector

CTN :45567253

20 Jul, 2026 NA

Jaipur - Rajasthan

Tender For manufacturing and supply of end cut hvn-66 insulating liners for provision at glued joints to rdso/drg. no. t-10235 (alt.-1) use with wider psc sleepers suitable to 60 kg(uic)/60e1 rails, and conforming to irs specification no. t-44-2025 (third revision). [ warranty period: 30 months afterthe date of delivery ][ rate of supply 20000 units per month , commencement time allowed -1 month ]

Nylon Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors