Latest nylon roller Tenders | Government nylon roller Tenders

Central Government And Public Sector

CTN :45727586

17 Jul, 2026 NA

Bangalore - Karnataka

Tender For linear motion (lm) guideways for x axis of new scrap wheel cutting machine to model no.shs45 of thk or exactly equivalent in hiwin , ina (schaeffler),rotolinear or nsk. specifications: rail length :2050mm; mounting hole pitch (p) : 105 mm ; g dimension : 35 mm. note: (a) the above rails are used in combination. hence, the butting ends shall be properly ground and finished, perpendicularity to be maintained for all the rails; (b) the lm guide rail shall be fully compatible with the lm block model shs45c of thk make. (c)only oems or their authorized dealers shall quote. a valid authorized dealership certificate (adc) must be submitted along with the offer. (d) a sample of one number of lm guide to be supplied for approval prior to dispatch of the entire po qty. (e) warranty certificate to be furnished along with the supply for a period of 18 months from the date of supply or 12 months from the date of fitment. (f)non-compliance with any of the above conditions will lead to rejection of the offer. [ warranty period: 18 months after the dateof delivery ] ]

CTN :45704004

17 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of suction hose , dagger drill bit , laminating resin , hardner for araldite , araldite , carbon fabric , bagging film , porous release film , sealant tape , adhesive tape masking , nomax honeycomb , aluminium honeycomb core , needle file set , glass fabric , nylon roller , sanding belt grit , sanding paper grit , peel ply , apron , breather sealing

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

CTN :45631920

11 Jul, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of ht breaker spares bhel - sc050010932 closing unit assembly , sc050010933 tripping unit assembly , sc050010934 motor cutoff limit switch assembly , sc050010935 mechanism shaft assembly , sc050010936 tripping spring assembly set , sc050010937 closing spring set , sc050010938 top pole head , sc050010939 bottom pole head , sc050010942 vcb support insulator 118 , sc050010944 lever for vi , sc050010945 drive link , sc050010946 d lever assembly , sc050010947 centering ring , sc050010948 spherical rod end , sc050010949 spacer tube , sc050010950 support rod , sc050010951 compression spring , sc050010980 emergency tripping assy , sc050010978 slow closing handle , sc050010955 motor charging handle , sc050010953 flexible connection for 1250a to 1600a , sc050010956 flexible connection for 2000a to 3150a , sc050010957 bearing , sc050010958 rollers , sc050010959 dashpot , sc050010960 1 set of clips , sc050010961 indicator , sc050010962 truck nylon wheels , sc050010963 nylon rollers for shutter lifting , sc050010964 bolt for truck wheel , sc050011207 1 set of pins , sc050010968 jaw contact square cu packer , sc050010969 manual knob push button , sc050010970 damping rubber pad , sc050010971 auxiliary rod , sc050010972 swing bolt , sc050011200 rack in rack out handle modified , sc050010975 52cd auxiliary bracket , sc050010976 vcb interphase barrier , sc050010991 pvc material vcb pole shroud , sc050010974 lead screw assembly , sc050010981 polycarbonate shroud for 3150a, above , sc050011203 plunger , sc050011202 plunger pin , sc050010990 door gasket 4.4mtr or panel , sc050010983 door glass , sc050011209 fixed contact set 2500a 1 set , sc050011210 fixed contact set up to 1600a , sc050010985 fixed contact set 2750 or 3150 or 3500a 1 set , sc050010205 seal off bushing r,y, b , sc050010992 interpanel seal off bushing , sc050010982 door lock assy , sc050010995 tripping lever or knob , sc050010996 cleat , sc050010998 insulating screw m6x22 , sc050010999 rear cover polyamide handle , sc050011000 packer round , sc050011001 al spacer round , sc050011003 support channel , sc050011004 busbar screw special- m20 bolts for support insulator , sc050011005 shim , sc050011006 steel stud , sc050011007 clamp plate , sc050011008 packer , sc050011016 barrier , sc050011015 sealing cover , sc050011014 busbar joint pvc shroud , sc050011013 support channel round packer , sc050011012 earthing connection , sc050390168 thol or con 220vdc thermal overload relay , sc050011020 smc barrier for top fixed contact , sc050011019 smc barrier for bottom fixed contact , sc050011018 smc large barrier between ct , sc050011017 vcb cover box , sc050011216 pvc sleeve l or f 0.4x240 for 200wd busbar , sc050011215 pvc sleeve l or f 0.4x128 for 100wd busbar , sc050011214 pvc sleeve l or f 0.4x104 for 75wd busbar , sc050011206 instrument panel door lock , sc050011205 instrument panel door lock steel rod 1 no and catcher 1no , sc050011204 lead screw hole covering padlock , sc050011201 polyamide support for instrument panel lock //bid details 2 / 65

Central Government/Public Sector

CTN :45449522

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of cross linear motion guide ways

CTN :45233277

08 Jun, 2026 NA

Doiwala - Uttarakhand

Tender For supply of spares and annual maintenance contract of bag stitching machine - spares for bag stitching machine model 80000 dx, needle g.b.250 (long size), needle bar guard, looper, looper thread cast of hook assembly, needle bar with nut, looper ball joint assembly, needle bar connecting link, feed bar, feed drive eccentric assembly, stitch regulating stud assembly, feed bar shaft, throat plate, bush set, threat tension assembly complete, feed dog, feed rocker assembly, screw set, feed lift eccentric fork, feed lift eccentric fork assembly, looper avoid eccentric assembly, needle bar connection, crank connecting rod, needle bar connecting assembly, needle bar clamp nut, looper shaft, looper rocker assembly, collar for feed rocker, pressure bar(left), pressure bar(right), pressure foot, guide fork, looper drive lever, shell for crank shaft, needle lever ball link, needle lever, looper drive connecting assembly, main crank shaft assembly, ball bearing for main crank shaft, needle thread guide, pressure bar spring, pressure bar link, pressure foot lifting lever with stud,hanger & spring, rocker for looper drive lever shaft, frame thread guide, needle lever shaft, looper drive lever shaft, pressure bar collar, driving pully for stitching head, bearing housing, bolt for driving pully, feed rocker shaft, pressure bar regulator, thread eylet, cover set(aluminium), looper stud complete holder, shaft for looper rocker stud, take up complete assembly, looper shaft fork, needle lever bolt, crank connecting rod with shell and needle lever ball link, ball looper carrier rod joint assembly, looper rocker holder, shaft for looper holder, shell assembly for rocker, feed lift came, feed lift u fork, connecting bearing, connecting assembly for chain outer drive, needle connecting rod, wood ruff key, connection assembly, needle holder, union elbow, stopper assembly, lubricator/oiler, thread cut off assembly, lever handle, pressure bar column, pressure bar holder complete with column, sleeve assembly complete, repairing/overhauling & amc for bag stitching machines during crushing season 2023-24, spares for bag stitching coveyor, chain slates, idler shaft with collar, teflone roller for chain slates, m.s rivit with split pin for nylone roller, split pin for conveyor chain, conveyor chain complete fitted with slates, driving chain for stitching conveyor, c.i. sprocket 7 teeth, m.s sprocket 16 teeth, m.s sprocket 20 teeth, m.s sprocket 28 teeth, end bracket shaft (front side), end bracket shaft (rear side), end bracket complete with sprocket,shaft & bearings, ball bearing for end bracket, idler, oil seal for gear box, adjusting spendle for end bracket, reduction gear box for stitching conveyor, slate screw with nylock nut, v belt a-35 for gear box, double action foot switch, foot switch element, conveyor chain (nacked) without slates

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

Central Government/Public Sector

CTN :44932337

04 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of linear motion guide way bearing block - h 25c- as per item# 1 of attached specification

CTN :44969627

02 May, 2026 NA

Panvel - Maharashtra

Tender For supply of mechanical spares and works - 1" u clamp bolt, 1" union, 1"x6m jindal gi pipe, 1.5" barrel nipple, 1.5" brass ball valve, 1.5" gi elbow, 1.5" gi tee, 1.5" gi union, 1/4x12 pu connector, 100x75 allen key bolt, 10mm drill bit, 10x75 gi nut bolt washer, 16mm tap, 16x200 anchor fastener, 212 bearing, 220 gear oil, 25x5 ms flat, 2.5" gasket, 2.5mm ms plate/17 sheet, 2500x470x50 water drop tray, 300x25x5mm ms flat, 3mmx4ftx8ft ms plate, 4x8x5mm acrylic sheet, 5/8x6 ms nut bolt with washer, 5mmx5ftx8ft ms plate, 6 inch bench vice, 6mm hex lock nut with washer, 6x65 allen cap screw, 8x25 bolt, 8x75 bolt, allen m10x75mm hex central column, ambika o ring, appu cake 10 kg event, barrel hand pump, bearing bush, bearing pin, brass bush 1/2x1/4, cake 1 kg for event, clutch drive, cylinder transportation bangalore/ram sir, df oil, momento for events and visitors, dpt conveyor load head, dpt conveyor load head hook, dpt conveyor overhead load head, dpt conveyor u clamp head, dpt shed air compressor local box, festo cylinder 40/300, file 6 inch, gas cutting torch, gasket 48 central column, gd lower bell, gear and shaft 4 inch, gi elbow 1", gi elbow 1.5", gi elbow 1x1/2", gi long bend 1/2", gi nipple 1.5"x2", gi nipple 1.5"x4", gi pipe 1.5" jindal, gi reducer 1x1/2", gi reducer tee 1x1/2", gi reducing elbow 1x1/2", gi saddle cleat 1.5", gi sheet 4x8x1mm, gi socket 1", gi tee 1", gi tee 1.5", gi union 1", gi union 1.5", gm ball valve 1.5", gm float valve with ball 1 inch, gm nrv horizontal 25mm, gm nrv isi screwed 1.5", ht full threaded rod 1m, ht lock nut 16mm, ht nut m16, hydraulic 68 oil, hydraulic hex nipple, hydraulic hose 3/4"x1m, hydraulic hose pipe, hydraulic jack 25 ton, ice pick, joy l150 coupling, l95 coupling with bore, lerc cylinder courier charges bangalore, m seal, metal gasket, ms elbow 150 class, ms reducer 150 class, ms sch 40 b/w elbow 50mm, ms sch 40 reducer, ms socket forged 3/4", nilkamal pallet trolley, nut bolt 6x20, nut bolt 8x40, orange helmet karam, ovcm machine cylinder new, ovcm machine cylinder rod modification, ovcm shaft length work, pneumatic long head silencer 3/4", polish paper, ps paper, pu connector 1/2", pu connector 1/2"x12, pu connector 1/2x1/4, pu connector 1/4x8, pu connector 3/8x8, pu pipe 8mm, pump motor shaft straightning and impeller repair, quarter pin, rubber hydro testing seal, rubber sheet 5mm, rubber washer o packing, sealing unit hose pipe ss grade 2m, seamless pipe 50nb sch 40 js, skf bearing, skf bearing 32206, skf bearing 6012, skf bearing 6024, skf bearing 6026, skf bearing 6303 zz, skf bearing 6304 2z, soap, spider l95, ss ball 150mm od, ss ball valve 1/2" threaded, ss blind flange 6 inch, ss cfb ball valve 1.5", ss cfb ball valve 2", ss nipple 1.5"x6", ss nipple 2"x6", ss rod 8mm, ss sheet 4x8x1mm, ss sheet 4x8x3mm, ss water bottle, sumo o ring, t 8mm, tap handle, taparia 450mm adjustable pipe wrench, teflon trolley wheel 6 inch, tyre coupling, v seal 16/24/5, v seal 22/16/4, washing unit sprinkler, lpg conveyor chain (carbon steel), solenoid valve 1/2" 24v dc, ptfe thread sealant tape 12mm, pressure gauge 0-10 bar 63mm, temperature gauge bi-metal 0-120c, limit switch conveyor roller type, proximity sensor inductive 12mm, stud bolt m20x100 ss316, hex nut m20 ss316, copper crush washer 1" lpg rated, teflon bush 50mm od, nylon roller 100mm dia, torque wrench 1/2" dr 40-200 nm, chain block 2ton, old head guide rod supply, media converter, omron smps, wire rope sling 5t 2m, drill machine check nut, jk drill bit high speed, 4' polish wheel, 10x45 alenkey nut bolt 48 corsol, tube(pu) od4 (blue), tube(pu) od6 (blue), tube(pu) od8 (blue), 1 1/4 5/2 single ext. pilot valve, 1/4 5/2 double ext. pilot valve, or valve g1/4

Central Government And Public Sector

CTN :44979936

14 May, 2026 NA

Bangalore - Karnataka

Tender For supply of linear motion guide rail (lm guide rail) to model no. shs 45 of thk make or exactly equivalent in other makes of m/s. lsk / ina / hiwin / roto linear, to the following specifications: length of the guide= 3045 mm, pitch= 105 mm , g dimension = 52.5; note: (a) the above rails are used in combination. hence, the butting ends shall be properly ground and finished, perpendicularity to be maintained for all the rails; (b) the lm guide rail shall be fully compatible with the lm block model shs45c of thk make. (c) only oems or their authorized dealers shall quote. a valid authorized dealership certificate (adc) must be submitted along with the offer. (d) a sample of one number of lm guide to be supplied for approval prior to dispatch of the entire po qty. (e) non-compliance with any of the above conditions will lead to rejection of theoffer. [ warranty period: 12 months after the date of delivery ]

Nylon Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector