Latest nylon tip Tenders | Government nylon tip Tenders

Central Government / Public Sector

CTN :44307080

11 Mar, 2026 NA

Multi City - Telangana

Tender For auction sale of others - description of lot: 74044-26-02-173-hyb-gwd-bldg: auction sale of scrap condemned, unserviceable, and abandoned predominant masonry structure i.e. railway station building- gadwal consisting of: 1] canteen and kitchen 2]pay and use toilets, master cooler drinking water 3]emergency tool room 4]rpf out post and retiring room 5]stairs 6]booking office and concourse area located at railway station building gadwal. anticipated released materials quantities approximately- (1)wooden doors & windows =0.170 mt (2) aluminum doors &windows=0.125 mt (3) ms steel=1.250 mt (4) gi steel=0.042 mt, (5) tar steel=14.00 mt (6) stainless steel=0.213 mt total units: 01 offered is for sale and for dismantling and demolition. available under the jurisdiction/custody of sse/works/mbnr. please check the lot image for the details of anticipated release materials from this building and images of railway station. location: gadwal ds-8 no: 740440007 dt: 17.02.2026. delivery by lot basis only. state: telangana. pl no. 98417538 hsn code: 73082019. refer to depot conditions for gstin of state railways, list of holidays, and other conditions. conditions: 1. the offered railway station building is located adjacent to railway platform. hence, utmost care should be taken during the dismantling/demolition process to avoid any untoward incidents. 2. if debris falls on the railway platform while dismantling the building, it should be cleared immediately by the purchaser to avoid inconvenience to the passengers.

Central Government/Public Sector

CTN :44287727

11 Mar, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets , dust bin stand , tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs,cut pieces of ms cupboards,rack etc , plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire , electric point , shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx

CTN :44064600

04 Mar, 2026 NA

Dimapur - Nagaland

Tender For bid to ras supply of hand held grinder cutter proffesional 1800 w , grinder cutter blade 125mm dia , wood cutter blade 125mm dia , welding machine portable 220a , foldable aluminium platform ladder type a 10 ft long , crow bar 6 feet long 40mm dia round dia , plaster trowler 6 inches wooden material , plaster trowler 8 inches wooden material , safety harness standard ansi z359 acp 140 kg , safety helmet light weight polythene hdpe , hand gloves masonary work , extension cable electric 2 sqmm hvy dty 240 v , 16 amp socket rated voltage 240 current , spirit level 3 feet long , spanner set size 6 to 22mm conf to is 2008 to 2028 , plumbbob with kanda and 2 mtr thread mild steel , iron tasala 10 kg capacity , iron bucket 15 ltr capacity

Central Government/Public Sector

CTN :43923932

07 Mar, 2026 48.00 Lacs

Pune - Maharashtra

Tender For corrigendum : renovation of building no p-696 of sncos mess at viman nagar and provn of hard platform in place of damaged wooden platform at base ops (twcc) under ge (af) lohegaon at af stn pune.

CTN :44249084

20 Mar, 2026 NA

Porbandar - Gujarat

Tender For excavation for foundation upto 1 and half meter depth including sorting out and stacking of useful materials and disposing of the excavated staff 50 meter lead , providing and laying cement concrete 1 cement 3 coarse sands 6 hand broken stone aggregate 40 mm nominal size and curing complete including cost of formwork , filling murrum select earth in trenches plinth sides of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering , white stone bela masonry block in course in suoerstructure sub structure with stone of approved quality in cement mortar 1 as to 6 , providing and laying ordinary cement concrete for rcc beam slab including finishing smooth with curing incomplete including the cost of form work but excluding the cost of , providing and laying ordinary cement concrete coarse sand graded stone aggregates 20mm nominal size for rinforced concrete chhajas lintel not exceeding 10cm thickness floor , providing of hysd bar reinforced for rcc work including bending binding and placing in position complete upto floor two level , providing and fixing 35mm thick shutters for doors windows and celestory windows including indian take wood frames 12cm x 7cm size including anodized aluminium fixtures and , providing and fixing ms grills of required pattern to wooden frames of windows etc with ms flatsat required soacing and frame around squarer round bars with round headed bolts , providing 15mm thick cement plaster in single coat on brick concrete walls for interior plastering upto floor two level and finished even and smooth , providing and fixing colored anodized aluminium section frame outer size 95 x 24 x 1 and point 17 of jindal section number 2459 , providing 20mm thick sand faced cement plastron walls upto height 10 meters above ground level consisting of 12mm thick backing coat , providing and laying vitrified tiles 10mm thick and 600mm x 600 mm size in flooring treads of steps and landing laid on a bed of 10mm thick , providing and laying white glazed tiles 6mm thicken skirting risers of steps and dado on 10mm thick cement plaster , paiting with plastic paints on wall surface to give an even shade including thoroughly brooming the surface to remove dirt dust mortar drops and loose scales of lime wash , paiting two coats on new wood and wood based surface with enamel paint interior to dirt dust and other foreign matter sand papering and stooping , charring out plinth treatment to post construction existing structure by spraying chemical solution for consistent with isi specification using chlordane and copurifies 20ec , providing and laying granite stone slab platform sill steps over 10mm base of cement mortar , providing and fixing 304 grade steel railing for stair and balcony as required by eic , sewage and water supply , electrification //bid details2 / 20

Central Government/Public Sector

CTN :44213627

19 Mar, 2026 37.01 Lacs

Gurgaon - Haryana

Tender For supply of arm of electrical installation of residential building mmc i supply of material c c - exhaust fan conforming to is 2312 -1967. , metallic louvred shutter suitable for 300 mm sizes exhaust fan. , metallic louvred shutter suitable for 380 mm sizes exhaust fan. , 1822 watt led surface mounted batten light. , 40 watt led surface mounted batten light. , 5-7 watt led recessed orsurface down lighter. , 12 -15 watt led recessed or surface down lighter. , 18 watt led recessed or surface down lighter. , led batten emergency ,inverter, luminaire minimum system lumen output of 2000 lumen. , utility knife tapaia uk-3 , spare blade ub-10 for utility knife uk-3 taparia , flexible connection pipe 450mm long, metal braided hoses . , measuring tape, length of the tape is 30 m. the width of the blade is 13mm. , casing capping clip , pvc nail clip 20 mm double nail. , aluminium paint . , red oxide metal primer. , paint thinner. , paint brush 2 inch , paint brush 3 inch , wooden screw 35 x 8 , wooden screw 50 x 8 , dry wall gypsum screw 0. 75 inch , dry wall gypsum screw 1inch , dry wall gypsum screw 1. 5 inch , 10 amp, 12 way, pvc strip connector. , 15 amp, 12 way, pvc strip connector. , iron drill bit set having 25 pcs . , self supported frp platform step ladder , multifunction testers . , 400 amp 04 pole power contactor. , 16 sq mm aluminium flat thimble , 25 sq mm aluminium flat thimble , 50 sq mm aluminium flat thimble , 70 sq mm aluminium flat thimble , 95 sq mm aluminium flat thimble , 120 sq mm aluminium flat thimble , 150 sqmm aluminium flat thimble , 185 sq mm aluminium flat thimble , 240 sq mm aluminium flat thimble , 300 sq mm aluminium flat thimble , 400 sq mm aluminium flat thimble , 16 sq mm aluminium ferrule , 25 sq mm aluminium ferrule , 35 sq mm aluminium ferrule , 50 sq mm aluminium ferrule , 70 sq mm aluminium ferrule , 70 watt flood light, powder coated pressure die cast aluminium body with driver . , 150 watt flood light, powder coated pressure die cast aluminium body with driver. , 45 watt street light led fixture powder coated pressure die cast aluminium body with driver . , 72 watt street light led fixture powder coated pressure die cast aluminium body with driver. , 90 watt street light led fixture powder coated pressure die cast aluminium body with driver. , 150 watt street light led fixture powder coated pressure die cast aluminium body with driver as per the requirement with driver. , 10 to 11 watt, 0. 6 metre nominal size led bollard light fitting complete with led module. , 25-watt led-based post-top luminaire, ip 65, with die-cast aluminium spigot housing, complete with diffuser, led module, driver with surge protection . , 10 watt to 12 watt spike led light with aluminium housing, ip66 having tiltable feature to throw light in the desired direction. , straight through cable jointing kit with heat shrinkable kit with ferrules for 1. 1 kv grade cable. size 2 x 16 sq. mm sq. mm 1. 1 kv grade cable. , straight through cable jointing kit with heat shrinkable kit with ferrules for 1. 1 kv grade cable. size 2 x 25 sq. mm sq. mm 1. 1 kv grade cable. , straight through cable jointing kit with heat shrinkable kit with ferrules for 1. 1 kv grade cable. size 3. 5 x 35 sq. mm sq. mm 1. 1 kv grade cable. , straight through cable jointing kit with heat shrinkable kit with ferrules for 1. 1 kv grade cable. size 3. 5 x 300 sq. mm 1. 1 kv grade cable. , cable junction boxes, ip 66 weather proof, size 205 mm x 255 mm x 112 mm, with terminals suitable for 16 sq mm cable. , 4 inch cutting wheel for metal suitable for 4 inch angle grinder. , 1. 5 volt alkaline nonrechargeable, type battery, size- aaa. , 1. 5 volt alkaline non-rechargeable, type battery, size- aa. , 9 volts alkaline non-rechargeable battery. , 23a, 12v alkaline battery. , led //bid details2 / 109rope light, 10 watt per metre or 120 led per metre, in various colors, ip65 rating, with adopter. , supplying of adapter for led rope light. , led rope light, 6 w per m

corporations/Associations/Others

CTN :44135265

07 Mar, 2026 17.21 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of repl of main rails and raising of rails , tightening, repl. of all bolts, clits. , repl,re fixing of bushes , repl of spur gear assembly , repl of rack pinion , oh of reduction gear box , replacement of sector gear , alignment, grouting of tippling base rollers , repl,repairing of hopper grill , alignment of tipplers , repl,repairing of outboard stool , dismantling,repl of top pivot housing , repl of wooden block , matching of teeth of sector gear , re-fixing lock lever , repl of top stop locking gears assly , side beam fixing of tippler , alignment of motors of wagon tippler , servicing of spray line valve size 4 inch , servicing of spray line valve size 3 inch , servicing of spray line valve size 2 inch , oh of overhead spray pumps , servicing of spray nozzles , lifting, proper fixing of vf tray , changing, fixing of side packing , to provide the patches , repl of plates of vf tray, chutes , removal of foreign , fillings oil in gear box , servocoating,tightening, repl of damaged bolts , greasing of all the nipple point , repl of break shoe liner , repl of main rail beam of wagon tippler , provision of backup in main rail beam , work on central platform , repairing of main rail beam , repairing of rollers of coal spill plates , fab, erection of back support of vf mouth chute , fab. , installing of vf tray supports , repl of coal spill plate , repairing of pit platform of main rail beam , repl of damaged beam of vf , repairing of counter balance beam , repairing of mdu base structure , repairing of damaged split spur gear , fab. , of mouth piece of vf , erection of new fabricated mouth piece of vf , oh of hoisting system , oh of hopper spray pump, line , provision of hopper liners, in coal hopper of vf , fab. erection of coal hopper partition stool , raising and re-fixing of mouth piece of coal liner chute of vf , repl of back,side plate of mouth piece , to attend the coal leakage from top mouth piece , re-fixing,repositioning of side and back supports , repairing,reposition of side guards of mouth piece , repl of buffer block and buffer pads of counter balance beam , repl of brake drum of thruster brake assly , repl of input,output,intermediate pinion of gear box , fab. and erection of counter balance beam , repairing of wagon tippler plate form by cutting and welding , removing the fallen loaded wagon in pit , inserting the side beam pins in bracket , dismantling,removing the broken shafts of wagon tippler , installation of drive and adjacent intermediate shaft , cutting, fabricated and installation of resting outer rail beam bottom plate