Latest nylon tube Tenders | Government nylon tube Tenders

State Government

CTN :45316015

01 Jun, 2026 NA

Dumka - Jharkhand

Tender For quotation for rate of materials - stone boulder of size 150 mm and below at quarry , supply of quarried stone 150-200 mm size for hand , broken at quarry , boulder with minimum size of 300 mm for pitching at quarry , gravel/quarry spall at quarry , gelatin 80% , jute netting, open weave, 2.5 cm square opening for seeding and mulching , random rubble stone , sand bags (cost of sand and empty cement bag) , square rubble coursed stone , stone bricks of size , (i) 250mm * 125mm * 100mcs , (ii) 250mm * 125mm * 125mm , (1) g.i. wire (8 to 10 swg) , (ii) black annealed (8 to 10 swg) , binding wire , (i) annealled wire (20 to 25 gauge) , (ii) black annealed (20 to 25 gauge) , expanded metal (18 gauge) 40mm * 25mm * 75 mm wid , bituminastic board (for use as per expansion joint 1.8.183 1938 filter) , (1) 25 mm thick , 150mm dia r.c.c.np2 perforated pipe , pressure release valve , (i) safety valve , (ii) pocket valve , cost of burnt clay pipe of internal dia 31.70 mm ( 11 /4^ prime prime ) external dia 38 mm ( 11 /2^ prime prime ) , (1)100 mm long , (ii)225 mm long , fuse coil , bolts 20 mm dia 25 cm long , coal tar , nuts and bolts 16 mm dia375 mm long with washer etc , palm leaves , check valve 38 mm dia. , 38 mm dia. water hose 30m long , nx core bit 48 cts(imp) , nx core bit 38 cts(imp) , nx tc bit , bx tc bit , nx st reamer cell 6.5 cts(imp) , bx st reamer cell 6.5 cts(imp) , good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

Central Government And Public Sector

CTN :45332724

08 Jun, 2026 5.37 Lacs

Ahmedabad - Gujarat

Tender For supply of supply of 3 tr non inverter ductable ac as per bsnl specifications , itc of 3 tr non inverter ductable ac as per bsnl specifications , supply and fixing copper piping of 0.75 inch with nitrite foam insulation as required , supply and fixing copper piping of 0.625 inch with nitrite foam insulation as required , supply and laying 4 core 4 sq mm pvc insulated copper cable as required. , supply and laying 4 core 2.5 sq mm pvc insulated copper cable as required. , supply and fixing 1 inch dia pvc pipe for water drainage as required , s fixing ms structure of suitable size as required , making covering of extra oper space of leakge as required , supply and fixing 8way double door 4 and 24 nos tpn mcb db , supply and fixing 5a to 32 a tpn c curve mcb in extg db as required , supply and fixing 60a four pole isolator in extg db as required , supply and fixing single ploe blanking plates , supply and fixing 8 swg gi wire for loop earthing as required , supply and fixing 150mm x 50mm x 1.5mm perforated ms cable tray

Central Government And Public Sector

CTN :45296336

13 Jun, 2026 41.66 Lacs

Guwahati - Assam

Tender For supply of supply of ductible split ac , itc of sac , pdg. and installing copper pipe , sitc of rigid u pvc piping , providing and fixing of outdoor unit stand , supplying and installing perforated m s cable tray , supply copper armoured power cable , supply copper unarmoured power cable , supplying and fixing spn sheet steel enclosure , providing and fixing gi wire

Central Government/Public Sector

CTN :45338644

01 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For supply of set of nylon tube 6mm outer diameter for gauge pipe lines, as per clw spec. no. clw/ms/03/079, alt-5 or latest, drg. no. 1209-18-406-056 or latest, (set consist 5 item 39 mtrs.) (1) green color tube=6mtrs per set, (2) red color tube=6mtrs per set, (3) yellow color tube=6mtrs per set, (4) white color tube = 6 mtrs. per set (5) blue color tube=15mtrs per set. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45338656

01 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For supply of set of double ferrules & insert, set consists of 2 items as given below: 1) ste of double ferrules (front & back) suitable for 6mm od nylon tube as per clw specification no. clw/ts/99/cf/5 with latest revision-1 set. 2) insert 6mm od as per clw specification no. clw/ts/99/cf/5 with latest revision-1 no. /set. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

Central Government/Public Sector

CTN :45301216

11 Jun, 2026 19.3 Thousand

Panchkula - Haryana

Tender For procurement of lubrication items - meter catridge d1-0-16 m/s cenlub or equivalent, teee block ft-6 with connectors m/s cenlub or equivalent, cenlub benjo f-b-6 with connectors, nylon tube dia 4 cenlub or equivalent or nylon tube dnt 4 dropco make, dropco motorised lubrication unit model dmc-ls-2800 dx

Central Government/Public Sector

CTN :45117006

01 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of nylon tube for 3 phase locomotives as per clw specification no. clw/ms/3/079, alt-5 consisting (1) nylon tube id 4mm od 6mm; colour - blue; length - 15 mtrs. (2) nylontube id 4mm od 6mm; colour - yellow; length - 08 mtrs. (3) nylon tube id 4mm od 6mm; colour - red; length - 15 mtrs. (4) nylon tube id 4mm od 6mm; colour - green; length - 08 mtrs. and (5) nylon tube id 4mm od 6mm; colour - natural; length - 08 mtrs. one set consists of nylon tube id 4mm od 6mm of 05 different colours of toatl 54 meters length. (item to be procured from clw approved sources only). [ warranty period: 30 months after the date of delivery ]

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Nylon Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors