Latest nylon washer Tenders | Government nylon washer Tenders

Central Government/Public Sector

CTN :45337178

15 Jun, 2026 NA

Delhi - Delhi

Tender For supply of hex head bolt 24x140 threaded 65mm, pitch 3mm, grade 8.8. with machined washer id-25, od-50 thickness 10mm and lock nut is:1367, thread is:4218 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335574

01 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of machined washer a25 as per drg.no. is:2016-67 table-1, coating as per mdts-057, packing instruction - pi042 as per drg.no. is:2016-67 table-1, coating as per mdts-057 specn: is:2016-67 table-1, coating as per mdts-057 specn: specn: is:2016-67 table-1, coating as per mdts-057 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45335286

11 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply m.s. plate ( locking bar assembly ) required for 1:8.5 tws turnout , it consist 2 nos ms plate as per rdso drawing no :-rdso/s-3462a & rdso/s 3404a, as per drawing attached along with all the insulation required (02 nos insulation plate,4 nos nylon washer & 4 nos nylon bush). approval of material sample should be taken from consignee before bulk supply. material should supply at consignee depot sse/s/m/jbp. this item is not available in gem [ warranty period: 30 months after the date of delivery ] ]

CTN :45303123

16 Jun, 2026 NA

Ajmer - Rajasthan

Tender For tender for supply of machinery fastners : -comp spring c7 0 41x6h14x20 , dust cover sy rubber , hose 100r3 10x300 , spl spring 27 c7 , comp spring , comp spring , comp spring h0002131 , comp spring , comp spring 27 c7 , hex soc set screw flat point m8x16 , stud b m6x85 , stud b m10x25 , sl ch hd scr m3x18 , sl ch hd scr m6x16 blackened , hex screw m8x16 , hex nut a m12 soft , hex nut m16 soft , hex nut m14 hard hex face surface hard , ring nut a m14x1 , lock nut m65x2 , machined washer 8 4 , hard washer m14 , spring washer b 8 , c1rclip ext a 4mm , int circlip b 120 , pin sr dia6x10 , thd taper pin dia 8x50 , filister hd rive dia 2 1 , taper handle e14xm10 , ball grip d 28 , eyeletpeg m6x25 , steel ball 7 by32 inch , steel ball 1 by4 inch grade v , plastic hose 1 by2 inch , hose 100r3 6x2000 , red elbow 1inch x1 by2 , stopper a bsp1 by4 inch , cyl plug dia4 , union g 1 by4 inch , taper male stud elbow coupling bsp ex18l , through cock bsp 1 by2 inch , through cock bsp 3 by4 inch , washer 16x22x2 , washer 21x27x2 , packing cu asb 22x30x2

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

Central Government/Public Sector

CTN :45303250

02 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of washers lock with lug - washers , lock with lug , steel 10.5 (for rb-089.t) -- as per specn. aa7169003 rev.00 , scru cap soc p-12.9 m20x160 (for rb-089.t) -- as per specn. aa7123123 rev.07 , hex bolt cl.8.8 m8x60 (hw-279.97) -- as per std. aa7111122 rev.08 , hex bolt cl.8.8 m8x85 (hw-286.79) -- as per std. aa7111122 rev.08 , screw cap soc. hd. m20 x 80 - cl.12.9 (hw-286.89) -- as per specn. aa7123123 rev.07 , soc. hd cap screw m10 x 20 - cl.8.8 (hw-286.75) -- as per specn. hw7123196 rev.01 , hex nut cl.8.8 m20x1.5 (hw-165.27.55) -- as per specn. aa7151210 rev.08 , soc. hd. cap sc. cl.8.8 m10x20(hw-187.108) -- as per specn. aa7123125 rev.05 , pin taper 5x28 (hw-298.34) -- as per drg. 4-11427-01107 rev.00 with matl. specn. aa7171041 , pin taper -st 3x40 (hw-356.95)-- as per specn. aa7171041 rev.07 , scru hex a -8.8 m8x45 (hw-354.03) -- fully m/cd item as per specn. aa7121123 rev.08 , lock washer with lug 8.4 (hw-288.32) -- as per is-5554 , scru cap soc p-12.9 m20x100 (hw-165.27.9.a) -- item as per specn aa7123123 rev.07 , hex screw m8x35 cl. 8.8 -- as per specn. aa7121123 rev.08 , scru hex a- 8.8 m8x60 (hw-396.17) -- item as per specn. aa7121123 rev.08 , soc. hd. cap sc. thin hd cl.8.8 m20x60 (hw-187.175) -- as per specn. aa7123125 , soc.hd.cap screw cl 12.9 m20 x 140 as per specn. aa7123123 , machined washer m16 (hw-187.61) -- as per specn. aa7161001 rev.04 , pin taper 4x26 (hw-285.45) -- item as per drg. 41140202209 rev.00 & spec. aa7171041 rev.07 , scru cap soc th hd a-8.8 m8x16 (hw-187.29) -- as per specn. aa7123125 rev.05

Central Government/Public Sector

CTN :45136901

01 Jun, 2026 NA

Avadi - Tamil Nadu

Tender For supply of set of nylon washers grade 66 consisting of 2 items to is 13464:1992. (1) od 14 mm xid 6.5 mm x thickness 3mm - qty - 1 no.. (2) od 18 mm x id 10mm x thickness 3mm - qty - 1no [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45049830

28 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of set of high pressure air hose for pneumatic equipments of emu rakes size-3/8" sae 100r1 fitted with female adopters and nylon washers length: (1) 50 cm qty = 28 nos. (2) 1 mtr qty = 72 nos. (3) 1.5 mtrs qty = 48 nos.(4) 2.5 mtrs qty = 04 nos.(5) 3 mtrs qty= 08 nos. (6) 4 mtrs qty = 08 nos. set consists of six ems = 168 no nos. (2) 1 mtr qty = 72 nos. (3) 1.5 mtrs qty = 48 nos.(4) 2.5 mtrs qty = 04 nos.(5) 3 mtrs qty = 08 nos. (6) 4 mtrs qty = 08 nos. set consists of six ems = 168 no [ warranty period: 30 months after the date of delivery ]

State Government

CTN :45042798

28 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of trw materials under electric supply area medininagar - electrical items :, nylon washer lt 30x18x12, nylon washer lt 22x11x12, nylon washer lt 1/2", nylon washer ht1/2", nylon washer lt 3/4", r.c strip 45x5/50x5, r.c strip 40x5, b.t.c strip, r.c washer 109x78x5, r.c washer 89x45x5, r.c washer 70x45x5, r.c washer 70x45x2, r.c washer 63x35x2, r.c washer 50x28x5, r.c washer 50x28x3, r.c washer 50x28x2, r.c washer 45x25x5, r.c washer 32x14x5, c.i cap 1 1/2"

Central Government/Public Sector

CTN :45118226

08 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of "machined washer a-25 to is: 2016/1967 (rev-1) reaffirmed 2021, table-1, coating as per mdts-057." [ warranty period: 30 months after the date of delivery ]

Nylon Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors