Latest oars Tenders | Government oars Tenders

State Government

CTN :45519882

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat chimbali. - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole 1-3-3, supplying and e

CTN :45516775

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of oars not copperd 17' long (n2040-000082) , oars not copperd 16' long (n2040-000083) , oars 15' long (n2040-000084)

Central Government/Public Sector

CTN :45512018

02 Jul, 2026 9.76 Lacs

Dakshina Kannada - Karnataka

Tender For supply of tennis ball - pet can,cricket ball - 4 piece,badminton shuttlecock nylon,football,table-tennis ball,tennis cricket ball - red,football corner poles and flags,football sideline referee flags,lawn tennis net,knee caps,ankle support - anklet stretchable,football stockings,hockey stockings,high jump crossbar - fiberglass,starting blocks - athletics,ball badminton racket - carbon fibre,hurdles - adjustable,football goal post net - polyethylene,handball goal post net,hockey goal post net,plastic stumps,carrom board striker,hockey sticks - carbon fiber,cricket mat - full-size mat,swiss ball,skipping rope,loop resistance bands,wobble balance board,foam roller,football keeper gloves,agility hurdles,sprint training parachute,agility ladder,mini space marker cones,throwing hammer wire steel,score board - wooden,lifebuoy,marker yellow floats,marker red floats,marker blue floats,stop watches,double sound chamber whistle,swim hand peddles,fins,mad wave long safety cord with waist belt,resistance band,resistance loop band,k

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45260577

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of metallic bench with wooden plank on top , a shaped metallic structures , v shaped metallic structures , t shaped metallic structures , h shaped metallic structures , y shaped metallic structures , l shaped metallic structures , u shaped metallic structures , plus shaped metallic structures , metallic circles , metallic semi circles , metal poles with circular or square plate on top , goal post shaped metallic structures , circular disc attached to poles with chains , metallic drum 1mx60cm , small swings , miscellaneous metallic structures as per diagrams , inclined ramp with support four ramps on one support , figure 8 structure metallic , spider web structure with ropes , ramp and slide set of 4 structures , barrels , balancing beams , screen jump , rope bridge , tarzan swing goal post with platform , double platform set , double ditch goal post , commando walk , tiger leap goal post with platform , rope climbing goal post , grout points , cement pcc blocks , gst 18 percentage ) /bid number : gem/2026/b/7427728 * /dated: 20-05-2026 & & / bid document 1 / 31

CTN :45465971

29 Jun, 2026 2.50 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of sport goods - sports equipments, cricket bbat (light weight), tennis cricket ball (red) nivia, stumps set, badminton shuttle cock box (synthetic), badminton net, badminton racquet, football (nivia shining star), handball goal net, basketball (nivia,vector), basketball net, volleyball (super volley), volleyball net (nylon), table tennis balls (gt 3star , 40+), table tennis bat, tennis ball, tennis net (sportiva, garware), air filling pump, chess board with chess man (wooden), college flag with poles, shot put, discus throw, long jump take off board, start clapper for race, official table as per specification, chairs as per specification, grass cutting machine

CTN :45399525

08 Jun, 2026 19.80 Lacs

Pulwama - Jammu And Kashmir

Tender For providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27 - providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27.

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45173402

04 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : survey, supply, transportation, carriage, erection, testing and commissioning for bifurcation/improvement and stabilization of ht of garhi samnabanj, kulwanta, satyalta, old and new, katwalt, replacement of rotten wooden poles under sd ramnagar

CTN :45351208

17 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For upgradation of school -solar lights with poles , desktop computers , ups microtek 1.5 kva , interactive panel , cctv survillance system ptz , music instrument , class room desk benches wooden with metal fram , book shelves , projector , inverter 15 kva 240 v with eight batteries , water purifier , computer table and chair

Oars Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector