Latest obstacle work Tenders | Government obstacle work Tenders

CTN :41043498

21 Jul, 2025 2.05 Crore

Delhi - Delhi

Tender For providing of safety and emergency response training services (version 2) - offline; weekdays

CTN :40908075

31 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for mechanic electric vehicle trade under craftsman training scheme (cts)at consignee locations - steel rule - 300 mm, graduated both in metric and english unit, steel rule - 600 mm, graduated both in metric and english unit, gloves - rubber, industrial/ safety shoes, industrial helmet, v block - 75 x 75 x 50 mm with clamp, v block - 150 x 100 x 75 mm with clamp, micrometer - outside, 0 mm to 25 mm, lc = 0.01 mm, micrometer - outside, 25 mm to 50 mm, lc = 0.01 mm, vernier caliper - 0 mm to 180 mm, lc = 0.02 mm with fine adjustment, micrometer: inside, 5 mm to 30 mm, engineer s square - 150 mm blade, engineer s square - 300 mm blade, angle plate - adjustable - 250 x 250 x 300 mm, spirit level - 150 mm, file - warding, smooth, 150 mm with handle, file - knife edge, 150 mm with handle, file - cant saw, smooth, 150 mm with handle, file - feather edge, 150 mm, file - triangular, smooth, 150 mm with handle, file - round, second cut, 200 mm with handle, file - square, second cut, 150 mm with handle, file - square, second cut, 250 mm with handle, file - triangular, second cut, 200 mm with handle, file - flat, second cut, 250 mm with handle, file - flat, bastard, 200 mm with handle, file - flat, bastard, 300 mm with handle, file set - needle, 160 mm, set of 12, file - half round, second cut, 250 mm with handle, file - flat, bastard, 250 mm with handle, file - round, bastard, 250 mm with handle, file - flat, second cut, 150 mm with handle, file - car body, bastard cut without tang, 300 mm with handle, oil stone - 150 mm x 50 mm x 25 mm, plier - combination, 200 mm, blow lamp - 0.5 liter, spanner set - double ended, 6 mm to 32 mm, set of 12, spanner - adjustable, 150 mm, spanner set - box type, 6 mm to 32 mm, set of 12, magnifying glass - 75 mm, clamp - toolmaker, 50 mm, clamp - toolmaker, 75 mm, clamp - c, 50 mm, clamp - c, 100 mm, scraper set - 200 mm, triangular, half round and flat, chisel - diamond point, 9 mm x 150 mm, chisel - cold, 20 mm x 150 mm, chisel - cold, round nose, 9 mm x 100 mm, motorized tenon saw, hammer - ball peen, 800 grams with handle, hacksaw frame - adjustable, 250 mm to 300 mm, hacksaw blade - length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, hammer - nylon, 30 mm with handle, precision screw driver - set of 6, screw driver - insulated, 10 x 250 mm, screw driver - insulated, 4 x 150 mm, screw driver - insulated, 6 x 150 mm, screw driver - insulated, 8 x 200 mm, screw driver - insulated, 8 x 300 mm, screw driver - philips, set of 5, neon tester - 500 v, portable electric impact drill machine, metal cut-off circular saw: floor standing, portable electric hand grinder: straight, portable electric air blower, portable electric jigsaw, portable electric random orbital sander, digital torque wrench - 20 nm to 280 nm, lifting tackle/ sling: 1 ton, 2 meters, air impact wrench with impact sockets, laser light pen: green, surface plate - cast iron, 600 x 600 mm with stand and cover, screw pitch gauge set - metric and british, 0.25 to 6 mm, 21 leaves, laser distance measuring instrument, palm scale: table top, 1000gm, allen key set - hexagonal, 1.5 mm to 10 mm, set of 9, universal quick adjustable multi-function wrench spanner set, 1/2 inch socket set, two post car lift - capacity 4 ton, electric operated, two wheeler scooter assembly set, transmission gearbox trainer, demonstration board: electric vehicle cooling system, mini commercial electric vehicle chassis, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, multifunction installation tester, electric vehicle service equipment test adapter kit, ac ev charger setup, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, instructor/ office chair - non-revolving, mid back, mesh, instructor/ office table, green board - 4 x 6 feet, stool - height 600 mm, working table - 8 (l) x 4 (w)

State Government

CTN :41012724

19 Jul, 2025 NA

Lunavada - Gujarat

Tender For providing of safety and emergency response training services (version 2) - offline; weekend

Central Government/Public Sector

CTN :41010705

30 Jul, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of sports items requirement at iitk - water polo balls men , discus 2kg , hammer 5kg , javelin , training javelin , feather shuttle cock , balls , football , hockey ball , squash ball , tt ball , tennis ball , volleyball , finger paddle lime punch , water polo training weight belt , unisex adult endurance pull kick training aids green , speedo fast skin speed socket mirror lens goggles , speedo unisex digital printed swim cap m and w multicolour , speedo womens printed long hair swim caps violet and ecstatic , finis long floating fins , water polo goal post net , swim parachute , fox 40 sonik blast cmg official whistle with break away lanyard , floor rubber mats for gym or yoga , frisbee , nylone net , dryland powercord with paddles swimming arm strength trainer professional freestyle swimming resistance exercise bands set , handball men , foot air pump with double cylinder , weightlifting barbell refer sheet , fox 40 pearl safety refer sheet , mini resistance band , heavy resistance band , thera band , gym belt , wrist band , knee caps , foam roller , balance foam pad , hand gripper , plyometric boxes , shoes throws 1 , shoes throws 2 , throwing net , javelin practice balls 1 , javelin practice balls 2 , hammer gloves for left hand , running spikes 1 , running spikes 2 , running spikes 3 , running spikes 4 , running spikes 5 , running spikes 6 , running spikes 7 , running spikes 8 , running spikes 9 , running spikes 10 , badminton synthetic shuttle , badminton grip , badminton racket , cosco exercise band , ankle weight , badminton string , balance ball , ankle weight , theraband , tables , cricket bat english willow 1 , cricket bat english willow 2 , cricket bat english willow 3 , cricket bat english willow 4 , cricket bat kashmir willow , batting pads 1 , batting pads 2 , thigh pads 1 , thigh pads 2 , thigh pads 3 , batting gloves 1 , batting gloves 2 , batting gloves 3 , batting inners , keeping pads , keeping gloves , keeping inners , helmet 1 , helmet 2 , helmet 3 , abdomin guard , bat grip 1 , bat grip 2 , bat gripper , mallet , flexi stump , plastic stump , synthetic ball , kit bag , ball armer , rebound net , ball counter , fiber tape roll , back roller , resistance band , footbal goalpost net , resistance band , practice poles for training , speed resistors refer sheet , football shoes 1 , football shoes 2 , football shoes 3 , football shoes 4 , football shoes 5 , football shoes 6 , football shoes 7 , football shoes 8 , football shoes 9 , hockey stick 1 , hockey stick 2 , training marker cones , training disc cone , hockey goalkeeper kit , training ladder , training agility hurdle , training bibs , goalkeeper kit refer sheet , hockey left hand gloves , training rubber refer sheet , hockey ball dimple std , hockey goal net garware , squash string 1 , squash string 2 , squash racquet 1 , squash racquet 2 , squash racquet 3 , squash grip , squash racquet protection tape , massag rollers , tt rubber 1 , tt rubber 2 , tt rubber 3 , tt rubber red , tt rubber black , tt rubber 4 , tt rubber 5 , tt blade 1 , tt blade 2 , tt blade 3 , tt blade 4 , tt side tape , tt clampped spinner , small cone markers , tt metal bat , tennis racket 1 , tennis racket 2 , tennis racket 3 , tennis overgrip , tennis string , volleyball net , volleyball pole , skiping rope , cone hurdles with refer sheet , volleyball training pratice , kit bag

State Government

CTN :41010878

21 Jul, 2025 NA

Valsad - Gujarat

Tender For providing of safety and emergency response training services (version 2) - offline; weekdays

State Government

CTN :41002414

23 Jul, 2025 3.50 Lacs

Botad - Gujarat

Tender For providing of safety and emergency response training services (version 2) - offline; weekdays

State Government

CTN :40985789

28 Jul, 2025 3.50 Crore

Mohali - Punjab

Tender For purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connec

State Government

CTN :40826581

14 Jul, 2025 3.30 Lacs

Himatnagar - Gujarat

Tender For corrigendum : providing of safety and emergency response training services (version 2) - offline; weekdays

Central Government / Public Sector

CTN :40962436

25 Jul, 2025 24.61 Crore

Panipat - Haryana

Tender For custom bid for services - rprc256204-rate contract for rotary equipment maintenance in p-25 units at panipat refinery-1. personal protective equipment (total marks - 80), i). whether p.e.e. used as per the contract standard., ii). p.p.e. compliance at site (% marks will be deducted as per the violation of each worker), iii). during the working period, at least 20% additional ppe by the contractor stock has been kept., iv). p.p.e. given to the worker by the contractor is recorded in a ppe monitoring register. contractor shall, have a detailed register., 2. training (total marks - 50), i). tool box talk has been provided to the contract workers and record maintained., ii). arrangement of safety training for contract workers (induction fire and safety training / on the job safety, training), iii). does the contractor ensure that all the workers are skilled as per the job given?, iv). does the contractor ensure that all contract workers are supervised directly by the competent person., 3. incident / injury / incidence of hair loss (total marks - 70), i). incident of near miss reporting by contract workers (1 point for each 20 under-miss reported, maximum, 20 points)., ii). unsafe act / unsafe condition noticed against contractor / contract employee., iii). first aid / fire incident / injury (10 for every first aid / injury), iv). major accident / major fire (100 every accident), 4. work permit (total marks - 100), i). all works done with valid work permit and clearance., ii). work permit violation (2 every work permit violation), iii). during the work, standard operating procedure (sop) was followed., iv). whether the standard equipment is used by the contractor., 5. safety incentives and awareness (total marks - 100), i). did the contractor motivate his employees on the basis of safety performance? whether the contractor, held a safety meeting with his employees and engineer in charge., ii). whether the contractor has promoted safety on the site to make the contract employees aware about, safety., iii). whether the contractor appointed a safety supervisor., iv). did the contractor or its worker get any appreciation award from the iocl management?, v). whether all the contract employees have been medically examined and their documents have been, submitted to the engineer in charge., .

State Government

CTN :40490525

16 Jul, 2025 NA

Multi City - Telangana

Tender For corrigendum : supply of safety training kiosk (stk)

Obstacle Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors