Latest ocb panel scrap Tenders | Government ocb panel scrap Tenders

Central Government/Public Sector

CTN :43593482

09 Feb, 2026 NA

Chittaranjan - West Bengal

Tender For supply of igbt based 3-phase drive propulsion equipment with physical medium i.e. esd/emd/ ofg for multi - functional vehicle bus (mvb) as per iec 61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and tractionconverter, auxiliary converter, interfacing connectors, cables and cable loom required for connection from vcu1/2 to sb1/2 panel. as per spec. no. i) rdso/2008/el/spec/0071, rev.5 for igbt based 3-phase drive propulsion equipment, ii) clw/es/3/0458 alt.e for cont rol cables, iii) clw/es/3/0459 alt. c for screened cable, iv) clw/es/3/0124 alt. o . in additio n to above description, the propulsion system should also comply requirementmentioned in "schedule of requirement" (sor), copy attached with tender documents. annual maintenance for three (03) years will be as per comprehensive annual maintenance specification no. clw/amc/c-d&d/01 issued in march 2016 [ warranty period: 72 months after the date of delivery ]

CTN :43581716

30 Jan, 2026 NA

Dantiwada - Gujarat

Tender For supply of hammer ball peen -0.25 kg , plumb bob -115 grams , wooden mallet 1 kg 75mm 15mm , conduit pipe cutting and threading machines adjustable -for 15 mm to 30 mm , conduit pipe bending machine, suitable -for 15 mm,18 mm, 25 mmand 30 mm pipe , hot wire ammeter -0-15 amps. , wheatstone bridge - , voltmeter m.c. -0-300 volts , voltmeter mc multi range 0.70- 150 -300 - 600 v , voltmeter m.c. multi range -0-15 30-50 and 75 v , voltmeter centre zero -15-0-15 volts , voltmeter m.i. multi-range -0- 150- 300-600 v , voltmeter m.i. multi-range -0-50- 75- 150 v , ammeter m.i. -0-30 amp panel board , ammeter mc -0 - 500 ma , autotransformer , solid state solar based single phase energy meter , ammeter m.c. centre zero -5-0-5 amp , ammeter mc -0 - 1 amp , single phase kwh meter analog -5a - 250 v ac , single phase kwh meter digital -5a 250 v ac , three phase kwh meter analog -25a - 415 v a. c , three phase kwh meter digital -25a - 415 v a. c , watt meter dynamo meter type -5 amps. and 250 v- 1.25 kw , magnetic flux meter -0-500 tesla , meter reading instrument , hydraulic crimping tool for ug cable crimping with bits -20 sq. mm to 250sq mm , crimping tool -heavy duty , small crimping tools , rubber matting -2 meter x 1 meter x 9 mm , wiring board on stand -3 meter x 1 meter with 0.5 meter projection on the top , set of wall jumper octagonal -37mm x 450mm and 37 x 600mm , pliers flat nose insulated -150 mm , pliers round nose insulated -200 mm , screw driver heavy duty -200 mm , screw driver heavy duty -300 mm , firmer chisel -1 inch , hammer ball peen -1.0 kg , hammer cross peen -0.5 kg , rawal tool holder and bit , scriber -150 mm , file flat -300 mm rough , file flat round -150 mm smooth , file round -300 mm 2nd cut , file triangular -150 mm 2nd cut , spanner set of 6 - double ended 18x18 - 20x22- 21x23- 24x27- 25x27- 30x32 , foot print grip -250 mm , hand vice -50 mm jaw , cut out relay -16a- 440v , reverse current relay -16a- 440v , insulators including hardware fitting -egg type , insulators including hardware fitting -suspension type , knife switch dpdt fitted with fuse terminals -16 amp , various lamps with fittings -halogen incandescent lamp , various lamps with fittings -fluorescent tube , various lamps with fittings - hp mercury vapor lamp , various lamps with fittings -high- pressure sodium lamp , various lamps with fittings -low- pressure sodium lamp , various lamps with fittings - floodlights , bus bar with brackets -1 mtr each , solar dc pump -24v, 1 hp , led lights -12v- dc- 5w , led lights -6 v- dc- 5w , solar charge controller with manual switch day lighting -6v-5 a , star delta starter -manual , star delta starter -semi-automatic , star delta starter -automatic , automatic reverse forward starter - , soft starter -1 phase , field regulator -0 - 1000 ohmic -2 amps , transformer single phase -1 k.v.a. 250 -100 v , d.c. compound motor -3 h.p 250 v with 4 point starter and field regulator , d.c. shunt motor -3 h.p 250 v with 3 point starter and speed regulator , d. c. series motor -3 h.p 250 v with 2 point starter and speed regulator , mg set consisting of squirrel cage induction motor 5 hp , immersion heater -1500 watt- 240v , mixture and grinder -750 watt- 240 v , dmx controller - dmx 512 , rewinding machine -manual , control panel -5 x 3 x 1.5 -foot , working bench -2.5 m x 1.20 m x 0.75 m //bid details 2 / 64

CTN :43219926

17 Jan, 2026 NA

Kamrup - Assam

Tender For supply of a panel with 6nos. of 63a mccbs & appropriate bus- bar arrangement

Central Government/Public Sector

CTN :43303939

21 Jan, 2026 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : repair maint of lt panel , bus bar, cable end jointing kit, lt cable, replacement of mccbs, relay, acb, feeder pillar and certain allied works at af stn nathatop

Central Government/Public Sector

CTN :43273997

19 Jan, 2026 50.00 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : spl repair/replacement of over head lt line to ug cable, lt bus bar panel, street lights and connected items under age e/m at babina cantt under ge babina

Central Government/Public Sector

CTN :43520287

19 Jan, 2026 NA

Bardhaman - West Bengal

Tender For supply of bus bar for sienens make 8pu-s1 panel.

Central Government / Public Sector

CTN :43406620

23 Jan, 2026 NA

Medchal-T - Telangana

Tender For corrigendum : supply, erection, commissioning and testing of igbt based 3-phase drivepropulsion equipment with physical medium i.e. esd/emd/ofg for multi-functional vehicle bus (mvb) as per iec 61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and traction converter, auxiliary converter, interfacing connectors, cables and cable loom required for connection from vcu 1/2 to sb1/2 panel. as per specification no. i)rdso/2008/el/spec/0071, rev.5 for igbt based 3-phase drive propulsion equipment, ii) clw/es/3/0458 alt.e or latest for control cables iii) clw/es/3/0459 alt.c or latest for screenedcable iv) clw/es/3/0124 alt.o or latest. the detailed scope for erection isenclosed at annexure-a. note: -the scope shall also include the removal of allexisting gto-based equipment, viz. burs, srs, and vcus etc., directly related to the provision of the igbt-based 3-phase drive propulsion system withphysical medium, as required for the integration of the new equipment. thedetailed scope for erection is enclosed at annexure-a. associated equipmentremoved during the replacement from gto to igbt shall be refitted (as per thesite engineer's guidelines), as necessary, to ensure proper functioning of the igbtpropulsion system. the firm shall ensure that, upon completion, the propulsionsystem is fully functional in all respects. all works and accessories necessary toachieve this objective, whether explicitly mentioned herein or not, shall be deemedto be included in the scope.(documents attached)

Central Government / Public Sector

CTN :43544867

23 Jan, 2026 NA

Medchal-T - Telangana

Tender For supply, erection, commissioning and testing of igbt based 3-phase drivepropulsion equipment with physical medium i.e. esd/emd/ofg for multi-functional vehicle bus (mvb) as per iec 61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and traction converter, auxiliary converter, interfacing connectors, cables and cable loom required for connection from vcu 1/2 to sb1/2 panel. as per specification no. i)rdso/2008/el/spec/0071, rev.5 for igbt based 3-phase drive propulsion equipment, ii) clw/es/3/0458 alt.e or latest for control cables iii) clw/es/3/0459 alt.c or latest for screenedcable iv) clw/es/3/0124 alt.o or latest. the detailed scope for erection isenclosed at annexure-a. note: -the scope shall also include the removal of allexisting gto-based equipment, viz. burs, srs, and vcus etc., directly related to the provision of the igbt-based 3-phase drive propulsion system withphysical medium, as required for the integration of the new equipment. thedetailed scope for erection is enclosed at annexure-a. associated equipmentremoved during the replacement from gto to igbt shall be refitted (as per thesite engineer's guidelines), as necessary, to ensure proper functioning of the igbtpropulsion system. the firm shall ensure that, upon completion, the propulsionsystem is fully functional in all respects. all works and accessories necessary toachieve this objective, whether explicitly mentioned herein or not, shall be deemedto be included in the scope.(documents attached)

CTN :43155219

21 Jan, 2026 NA

Durgapur - West Bengal

Tender For corrigendum : supply, installation and commissioning of 5 no 6.6kv vcb panel - job of:- i) supply, installation and commissioning of 11(eleven) no. 6.6kv vcb and ii) supply, erection, commissioning and restoration of 2750a 6.6kv aluminium bus duct of 30m length with support insulators and 3-phase aluminium alloyed bus bar (square shaped c.s.) at 250 mw u#8/dpps .

Central Government / Public Sector

CTN :43042189

16 Jan, 2026 NA

Medchal-T - Telangana

Tender For corrigendum : supply, erection, commissioning and testing of igbt based 3-phase drivepropulsion equipment with physical medium i.e. esd/emd/ofg for multi-functional vehicle bus (mvb) as per iec 61375, terminal bracket, bus bar link and cu braid required for connection between main transformer and traction converter, auxiliary converter, interfacing connectors, cables and cable loom required for connection from vcu 1/2 to sb1/2 panel. as per specification no. i)rdso/2008/el/spec/0071, rev.5 for igbt based 3-phase drive propulsion equipment, ii) clw/es/3/0458 alt.e or latest for control cables iii) clw/es/3/0459 alt.c or latest for screenedcable iv) clw/es/3/0124 alt.o or latest. the detailed scope for erection isenclosed at annexure-a. note: -the scope shall also include the removal of allexisting gto-based equipment, viz. burs, srs, and vcus etc., directly related to the provision of the igbt-based 3-phase drive propulsion system withphysical medium, as required for the integration of the new equipment. thedetailed scope for erection is enclosed at annexure-a. associated equipmentremoved during the replacement from gto to igbt shall be refitted (as per thesite engineer's guidelines), as necessary, to ensure proper functioning of the igbtpropulsion system. the firm shall ensure that, upon completion, the propulsionsystem is fully functional in all respects. all works and accessories necessary toachieve this objective, whether explicitly mentioned herein or not, shall be deemedto be included in the scope.(documents attached)

Ocb Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector