Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.
Tender For auction sale of others - u/s scrap of different t&p machine items lying near ss-iv,oil godown, office,r-1,r-2......etc ,kur under ssee/p,ac & tl/kur as per attached annexure. [total deliverable qty. in 1.0 by lot] [ the lot contains 1. ferrous= 9280.22 kgs appox. 2. copper= 1020.45 kgs appox. & 3. aluminium= 137.65 kgs approx.]
Tender For auction sale of metallic, non-metallic - the includes disposal of unserviceable & obsolete items such table, chair and old photocopy machine etc. these items have been discarded and are no longer usable by this office. the details of unserviceable and obsolete items to be disposed is attached as annexure-a: the bids are invited for the entire lot on consolidated basis only. no bid for part quantity/items shall be accepted. the lot shall be awarded to the bidder quoting the highest consolidated rate for the complete lot. the disposal of stores shall be strictly on �as is where is basis� and no complaint regarding quality, quantity or condition of the items shall be entertained after submission of bid/sale
Tender For auction sale of depot miscellaneous scrap - scrap condemn kirloskar make diesel oprated 180 kva diesel generator set with alternator diesel tank etc.model no. nt 743g alternator machine no.xx2052023 in dismental condition.not fir for railway use. road access is available. this diesel generator set is approx 3090 kgs location:- in sse-elect-south office compound. remark- 1 ¿ no changes will be made in the said lot 2 - lot will be sold on as is where basis 3 - the said lot is under the charge of sse-elect-south-gkp 4.ensure delivery while complying with all aplicable rule and condition lbpl, dbn, gst-18%, tcs -1% , hsn code-840810 allocation-20714208
Tender For auction sale of depot miscellaneous scrap - sc ms/ci cond high speed industrial washer cum extractor supper sine machine cap-60 kg each without motor. released from sse/c&w/ muv. not fit for railway use. approx weight-3065 kgs location; - south-east side of dy cmm office. near bargad tree lbpl, dbn, gst-18%, tcs -1% , hsn code- 84502000 , allocation-20714208
Tender For auction sale of scrap rubber glazing, scrap clutch plate diaphragram type, scrap clutch plate tata star type, scrap pressure plate back plate tata/ley/eicher,scrap auto electrical items,scrap diesel tank 250/280 litre,scrap empty oil barrel 210 ltr capaicity,scrap empty grease barrel 182 kg capacity,scrap empty oil barrel 210 litre capacity dented or rusted,scrap fip spare hydralic head,scrap front /rear break shoe with or without linings,scrap gear parts syncro cone,scrap ms scrap(civil section ms angle),scrap nozzles,scrap rubber scrap (including cut tube+flaps others),scrap ac head assy,scrap air compressor,scrap air conditioner 1.5 mt,scrap air cooler 20 ltr capacity,scrap armature,scrap battery charger machine,scrap bearing,scrap belt tensioner,scrap break drum tata/ley/eicher,scrap bvc tin 20 litre capacity including dented or rousted,scrap centre joint shaft,scrap crankshaft(tata-2&ley bs-ii old model),scrap crown wheel assy,scrap curing bags 1000x20 torned,scrap curing envelops 1000x20 torned,scrap cut/damaged flap size 1000x20 ,scrap dd unit body,scrap diesel smoke meter dsm-2000 model,scrap drive assy,scrap engine or gb bell housing,scrap exhaust manifold,scrap fire extinguisher 2kg/5/kg/9kg,scrap flywheel rings tata/ley/eicher,scrap front or rear axle,scrap grease barrel 182 kg capaciry dented or rusted,scrap grease pump lg make 200kg capacity,scrap hub leyland/tata/eicher,scrap hydraulic /mechanical jack 10 mt capacity,scrap king pin bushes,scrap m s,scrap paint tin 4litre (metal),scrap pole housing,scrap poly plastic,scrap pop revit gun,scrap push rod assy,scrap radiator core,scrap radiator core with bracket,scrap rear housing assy,scrap rotar,scrap seat frame with luggage carrier,scrap silencer muffler,scrap spring leafs all size,scrap stator,scrap stub axle assy,scrap tierod assy,scrap tread rubber powder and cut pieces,scrap tubeless tyre disc,scrap tubes full round with/without neck,scrap viscous with or without fan,scrap welding machine,scrap wheel disc welding(including two disc) with or without ring,scrap wheel tyre disc with or without ring,scrap wiper motor tata/ley/eicher,scrap automatic slack adjuster,scrap pressure plate tata/ley/eicher,scrap steering box scrap,scrap tata-3 retarder,scrap waste paper(office old paper+cotmt),scrap water pump (ley/tata/eicher),scrap bell housing,scrap auto grade ii items
Tender For auction sale of others - empty barrels- 296 nos-sale on number basis only. lot no. 5455 26 05 13 gtl tim eb ap available with sse tm gtl scrap condemned and un-serviceable empty barrels consisting of ¿ (1) 210 lit capacity oil barrels with or without lids ¿ 279 nos (2) 182 kgs capacity grease barrels with or without lids ¿ 17 nos. total qty: 296 nos. available at timmanacherla, near guntakal, inside sse/track machine office. ds-8 no. 545502526008 dt.10.03.2026. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.