Latest office tables scrap Tenders | Government office tables scrap Tenders

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

Central Government/Public Sector

CTN :45280966

15 Jun, 2026 NA

Hajipur - Bihar

Tender For at hajipur :- improvement to gm office complex by provision of modular work station.

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

CTN :45284241

28 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

CTN :45114452

30 May, 2026 4.57 Crore

Delhi - Delhi

Tender For corrigendum : supply of furniture e e - revolving executive high back chair , revolving executive high back mesh chair , revolving high back mesh chair with headrest , revolving high back chair with headrest , revolving full back chair , revolving high back chair , mid back revolving chair , revolving mid back chair , executive table with eru attached pedestal , table with eru attached pedestal , executive table with eru , table with eru , modular table , conference meeting table 8 seater , meeting table 8 seater , conference meeting table 12 seater , conference meeting table 10 seater , library table , executive mid back revolving chair , full back revolving chair , full back revolving mesh chair , 3 seater sofa leather , 3 seater sofa fabric , 3 seater sofa wooden , 3 seater sofa leatherette , 2 seater sofa fabric , wooden centre table , glass top centre table , glass top with drawer centre table , wooden corner table , glass top corner table , side table , corner side table , modular work station 1500 x 750 x 750 , modular work station 1350w2 x 1350w2 x 750 , 24 seater conference table , low height metal storage unit , metal storage unit , slotted angle rack , 4 bay optimizer , 1 seater recliner , steel dustbin , cafeteria table , cafeteria chair , reception table , desklet chair ) /bid number : gem/2026/b/7506371 * /dated: 07-05-2026 & & / bid document 1 / 38

CTN :45246392

22 Jun, 2026 NA

Purnea - Bihar

Tender For establishment of clean room (iso-07, garde-c) 1. renovation/conversion of unclassified room into grade-c & iso-7 at purnea semen station nh-31 maranga, purnea, bihar-854303work includes: commissioning & validation of hvac works, modular partition, electrical utility piping work.

CTN :45240601

03 Jun, 2026 NA

Jamshedpur - Jharkhand

Tender For supply and installation of t-shaped modular work station with integrated cable management (double seater) as per specification as enclosed annexure. [ warranty period: 24 months after the date of delivery ] ]

CTN :45214237

25 May, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked , shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked , rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent marked , ms plate 20 swg /1 mm thick as in wall (outer body) , ms plate 18 swg /1.22 mm thick as in roof (outer body) , ms plate 26 swg /0.46 mm thick as in secondary outer body. , 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong) , hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side , hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa) , 19mm thick ply make: kitply / green ply / century ply , steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories. , steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories. , detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal , pop rivet 3m x ½” , pop rivet 4m x ½” , welding rod n. 10 , primer paint , ir absorbent paint camouflage pattern , metal putty , rubber solution , hydraulic jack with rubber hoses and fittings , electrically operated winch assy , jack side support 2 ton , map boards 6' x 6' with all accessories , vps / projector system stand , canvas cover 30'x30' , 3 kg fire extinguisher & fire ball , self screw 25x1 , multi spectral camoflauge net , led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton) , entrance light (bucket light) , ac starter with fittings and mcb , single core wire 2.5mm , single core wire 1.5mm , single core wire 1 mm , insulation tape , modular s/w with cover on/off 5/15 , socket 5 amps 3 pin , socket 15 amps 3 pin , switch boards 10 “ x 10” , switch boards 6” x 6” & 6” x 3” , exhaust fan 300mm , work station/ partition , wall mounted fan 450mm , focus / spot light for mapboards , hdmi cable for projector , led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony , de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic. , electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska , shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :- , ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells . , iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded coppper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza , iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells , v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells. , vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells. , cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm ,

Corporations/Associations/Others

CTN :45217725

16 May, 2026 NA

Patna - Bihar

Tender For upgradation with modular work station structure of block -a & block - b of 1st to 3rd floor as per drawing of total built-up area of 11652 sft (approx) of bihar police building construction corporation, patna with furniture.

CTN :42939355

16 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of provision of database with pcs d d - desktop computer , all in one pc , ups 1 kva , tower server t550 power edge , info kiosk , interactive panel 85 inch with stand , colour printer with scanner , printers , multi functional device , multimedia projector , scanner with printer , hy duty scanner , digital camera , external cd dvd writer , wireless presenter , hdmi splitter , hdmi cable 20mtr , printer data cable 10mtr , cat 6 lan cable 305 mtr , 8 port switch , keyboard , mouse , modular it infra work station

Office Tables Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Corporations/Associations/Others