Get complete information related to latest Official Equipment Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Official Equipment Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Official Equipment Tenders.
Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.
Tender For auction sale of others - u/s scrap of different t&p machine items lying near ss-iv,oil godown, office,r-1,r-2......etc ,kur under ssee/p,ac & tl/kur as per attached annexure. [total deliverable qty. in 1.0 by lot] [ the lot contains 1. ferrous= 9280.22 kgs appox. 2. copper= 1020.45 kgs appox. & 3. aluminium= 137.65 kgs approx.]
Tender For auction sale of depot miscellaneous scrap - scrap condemn kirloskar make diesel oprated 180 kva diesel generator set with alternator diesel tank etc.model no. nt 743g alternator machine no.xx2052023 in dismental condition.not fir for railway use. road access is available. this diesel generator set is approx 3090 kgs location:- in sse-elect-south office compound. remark- 1 ¿ no changes will be made in the said lot 2 - lot will be sold on as is where basis 3 - the said lot is under the charge of sse-elect-south-gkp 4.ensure delivery while complying with all aplicable rule and condition lbpl, dbn, gst-18%, tcs -1% , hsn code-840810 allocation-20714208
Tender For auction sale of depot miscellaneous scrap - sc ms/ci cond high speed industrial washer cum extractor supper sine machine cap-60 kg each without motor. released from sse/c&w/ muv. not fit for railway use. approx weight-3065 kgs location; - south-east side of dy cmm office. near bargad tree lbpl, dbn, gst-18%, tcs -1% , hsn code- 84502000 , allocation-20714208
Tender For auction sale of scrap rubber glazing, scrap clutch plate diaphragram type, scrap clutch plate tata star type, scrap pressure plate back plate tata/ley/eicher,scrap auto electrical items,scrap diesel tank 250/280 litre,scrap empty oil barrel 210 ltr capaicity,scrap empty grease barrel 182 kg capacity,scrap empty oil barrel 210 litre capacity dented or rusted,scrap fip spare hydralic head,scrap front /rear break shoe with or without linings,scrap gear parts syncro cone,scrap ms scrap(civil section ms angle),scrap nozzles,scrap rubber scrap (including cut tube+flaps others),scrap ac head assy,scrap air compressor,scrap air conditioner 1.5 mt,scrap air cooler 20 ltr capacity,scrap armature,scrap battery charger machine,scrap bearing,scrap belt tensioner,scrap break drum tata/ley/eicher,scrap bvc tin 20 litre capacity including dented or rousted,scrap centre joint shaft,scrap crankshaft(tata-2&ley bs-ii old model),scrap crown wheel assy,scrap curing bags 1000x20 torned,scrap curing envelops 1000x20 torned,scrap cut/damaged flap size 1000x20 ,scrap dd unit body,scrap diesel smoke meter dsm-2000 model,scrap drive assy,scrap engine or gb bell housing,scrap exhaust manifold,scrap fire extinguisher 2kg/5/kg/9kg,scrap flywheel rings tata/ley/eicher,scrap front or rear axle,scrap grease barrel 182 kg capaciry dented or rusted,scrap grease pump lg make 200kg capacity,scrap hub leyland/tata/eicher,scrap hydraulic /mechanical jack 10 mt capacity,scrap king pin bushes,scrap m s,scrap paint tin 4litre (metal),scrap pole housing,scrap poly plastic,scrap pop revit gun,scrap push rod assy,scrap radiator core,scrap radiator core with bracket,scrap rear housing assy,scrap rotar,scrap seat frame with luggage carrier,scrap silencer muffler,scrap spring leafs all size,scrap stator,scrap stub axle assy,scrap tierod assy,scrap tread rubber powder and cut pieces,scrap tubeless tyre disc,scrap tubes full round with/without neck,scrap viscous with or without fan,scrap welding machine,scrap wheel disc welding(including two disc) with or without ring,scrap wheel tyre disc with or without ring,scrap wiper motor tata/ley/eicher,scrap automatic slack adjuster,scrap pressure plate tata/ley/eicher,scrap steering box scrap,scrap tata-3 retarder,scrap waste paper(office old paper+cotmt),scrap water pump (ley/tata/eicher),scrap bell housing,scrap auto grade ii items
Tender For auction sale of others - empty barrels- 296 nos-sale on number basis only. lot no. 5455 26 05 13 gtl tim eb ap available with sse tm gtl scrap condemned and un-serviceable empty barrels consisting of ¿ (1) 210 lit capacity oil barrels with or without lids ¿ 279 nos (2) 182 kgs capacity grease barrels with or without lids ¿ 17 nos. total qty: 296 nos. available at timmanacherla, near guntakal, inside sse/track machine office. ds-8 no. 545502526008 dt.10.03.2026. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.
Tender For auction sale of depot ferrous scrap - scrap ms mix consist of pantograph parts like lower arm, base frame, upper frame, pushrod, steady tube, balancer, longitudinal tube, push rod, carbon strip, , chisel bar, chisel rod, chipping machine, clamp bailer, pavement breaker, coupling with rod, hand ratchet, jack rod, pipe cutter, plumb bob, punch rod, punch rivet, spanner, , chainhook, valve wheel, drill rod, hydraulic, valve wheel, drill rod, hydraulic jack, drill rod, plates trolley, cupboard note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location:c by1, near office
Tender For auction sale of depot ferrous scrap - old used and u/s signaling items i.e. complete signal units, electronic lifting barrier, signaling pole latice with ci attached, cable termination rack, location box full &half, armed wire, sliding boom complete, operating panel, padestal, ristrictor wearing plate, gi boom for elb, nbt block instrument, point machine chasis with accesaries with minor nf attached, lock lever, stop disc for lb, winch m/c, ground connection, rail attached ms board, ms board with angle, ms rusted bars, rods, fire bucket, electric lifting barrier and other signaling items with minor nf attached, c&w items i.e. various types and sizes broken springs, inner springs, released bogie beams offsized outer springs, broken cbc body, striker casting wear plate, man hole cover, pull rod, push rods, plates, knucle pin, brake beams, cp top, knuckle, draft gear box, adeptor, push rod, safety bracket, brake shoe, pin, nut bolts, top side liners, stricker, primary verticlal damper, yaw damper, vertical shock absorber, vertical sec damper, lateral damper, axel end cover, centric disc, fastners, fire extingyishers offsize & type, beater, pick axe, shovel heat, mechanical jack, hydraulic jack, pad lock, hammer, gi wire, basket, tin case, offsize rack ballast, bucket gi, pan iron, ohe items i.e. offsize and type insulators, ohe high mast cut pieces and other ohe items, ms bond patti, blow lamp, structural clamp, isolator assembly, various boards, retro reflactive number plates, junction box, small chain, anti climbing device, hot rolled steel flat, fuse switch assly, padestal, cantilever assly, da-2, caution board, guy rod with mast & guy attached bolt items of electric and power department i.e. pawrah, el box, switches, etc items of works department i.e. ms angle, plates, ms patra, ms i sections, gi gater, parline, tmt bars, gate post, gate flap and other ms items with some rail pieces attached, items of tele department i.e. cgdb pole, ms boxes, items of p way department i.e. rail dolly, push trolly, self propelled motor trolly, hand cart, gi case, broken tiebars, ms engineering boards, rail cum road trolly, ms clamp for joggle fishplate, rail tongue, st slipper, all types of lc boards, ms pipe, ms fishplate, hs lamp, rail toung, whistel thunder, hand operated cutting m/c, hydraulic jack, office clock, dubber for gate lamp, gi bend, broken bdds rsp tool kit, broken bomb blank vehicle search mirror, lock pad, skv welding set, rusty cst 9 port, ms sheets, chequered plate, cc cribs, may have some ss items (the above items may be with minor nf attached or may not be) (the above items may have rusty and dusty or may not be) ( cuting allow for easy loading before delivery) mode of delivery- by weight location - scrap yard & i/f of godown 6
Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units ,unit no. 19 - small shed near dome , unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. in lot abandoned condemned buildings consisting of released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar , gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian is sse (w) bvp, mode of delivery by weight, deliverable lot qty - 7.683 mt, loading by purchaser. note: 1. delivery of only ferrous material as mentioned qty. in lot will be given. purchaser is not allowed to take leftover ferrous material. 2. all wooden material including released door with chowkhat, released window with chowkhat, zaffry or any other wooden items are reclaimable and needed to submit to the custodian at reclaim area marked in mg workshop. 3. delivery of the material will be given only after submission of reclaimable material 4. purchaser needs to remove debris, bricks, masonary, rubble, ac sheets, manglore tiles from the dismantling sites untill ground is fully clear before taking the delivery. 5. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 6. after removing/ clearing the rcc/ brick masonary rubbish from the spot only, the delivery of iron material will be affected. 7. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 8. part delivery is not allowed. 9. any mg/bg rail lines or pway scrap with or without attachments lying under or beneath of building/sheds/structures are not deliverable. 10. purchaser need to first dismantle the all buildings/sheds/structures then only delivery will be permitted. fdp 50 days.