Latest offset printing paper Tenders | Government offset printing paper Tenders

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45511691

18 Jun, 2026 5.06 Lacs

Halli - Karnataka

Tender For supply of teaching and learning material, bala facility and nutrition kit to the schools of 1 hps badanahatti, 2 ghps valmiki nagara badanahatti, 3 gmhps emmiganur, 4 ghps genikehal, 5 ghps guthiganur, 6 ghps kurugodu, 7 ghps indira nagar kurugodu, 8 ghps ghs kolur, 9 ghps ghs somalapura, 10 ghps ghs soma samudra, 11 ghps ghs vaddatti, 12 ghps devasamudra, 13 ghps honnalli, 14 ghps kanavi thimmalapura, 15 gmhps rama sagara, 16 ghps uppara halli metri, 17 ghps muddapura no 10 total 17 ecce schools. in ballari taluk and dist

CTN :45511694

18 Jun, 2026 9.89 Lacs

Halli - Karnataka

Tender For supply of teaching and learning material, bala facility and nutrition kit, outdoor play materials to the ecce schools of ghps belagal,ghps ghs belagal thanda,ghps fort ballari west 3 schools, ghps bisilahalli,glps ramaiah colony,ghps benakallu hosa badavane,gmhps chalburki,ghps gotur,ghps ibrahimpura,ghps kakkabevina halli,ghps kammarchedu,ghps ghs kuntanahal,ghps rayapura,ghps rupanagudi,ghps sanganakalu,gmhps sidigina mola,ghps & ghs sindhuvala,ghps siriwara,ghps yalpi,ghps yettina budihal east 17 schools total 20 schools in ballari taluk and dist.

CTN :45511690

18 Jun, 2026 3.47 Lacs

Multi City - Karnataka

Tender For supply of teaching and learning material, bala facility and nutrition kit to the schools of ghps bhatri, ghps havambhavi, ghps guggarahatti west 3 schools, ghps mundrigi, gmhps kambli bazar, ghps 13th ward bellari, ghps andral east 4 schools. total 7 ecce schools in ballari taluk and district.

CTN :45511695

18 Jun, 2026 4.16 Lacs

Kurugodu - Karnataka

Tender For supply of teaching and learning material, bala facility and nutrition kit to the schools of 1 ghps sn pet kampli, 2 ghps ittigi, 3 ghps devalapura, 4 gmhps kurugodu west, 5 ghps basarakodu, 6 ghps dammur, 7 ghps gudadur, 8 ghps hire hadligi, 9 ghps ghs kappagal, 10 ghps kalkutukinhal, 11 ghps korlagundi, 12 glps ambedkar nagar korlagundi, 13 ghps ghs sindhigeri, 14 ghps byloor east. total 14 ecce schools in ballari taluk and dist

Central Government/Public Sector

CTN :45429089

30 Jun, 2026 NA

Hisar - Haryana

Tender For providing of 1.stationary & examination material 2. (laboratory/office equipment) 3. (material for cleaning & sweeping) 4. (furniture) 5. (ro/water purifier) 6. (air conditioners) 7. (musical instruments) 8. (pa system) 9. (computer software, hardware equipment's, cctv/lcd projectors/printer-xerox toner cartridge) 10. (water coolers) 11. (photocopier) 12. (electric items) 13. (building material cement, barjri reta, saria, bricks hardware items) 14. (sanitary items) 15. (sports items) 16. (fire safety equipment's) 17./(audio video teaching aid items) 18. (medicines & medical first add equipment). 19. banner/flex printing 20/library books & magazines.21. (id card printing). 1. (printing) 2. (gardening) 3. (house-keeping) 4. (security) 5. (electric-maintenance) 6. (carpentry) 7. (plumbing) 8. (civil-repairing) 9. (pest-control) 10. (white washing, painting work of building) 11. (data entry operators services) 12. (computer-printer/cctv/xerox machine/ro/air-conditioners etc, amc, printer xerox tonner refilling) 13. (transport bus/taxi services) 14. (catering service for sports meet)15. (boarding/lodging/tent services for sports meet). 16. vidyalaya canteen service. 16. (ragman services). 17 authorised firm to collect e-waste. 18. hire of fancy/other dress.

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45379154

10 Jun, 2026 NA

Arakandanallur - Tamil Nadu

Tender For for mechanical engineering department lab equipments are required as per new syllabus - upgradation of labarotariesmechanical department, bearing with shaft assemblytype: dismantling and assembly teaching unitshaft diameter: 30 mmshaft material: en8 steelbearings: deep groove ball bearing (6205 / 6206)housing: cast ironlocking arrangement:circlipslock nutsend coversmounting:bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unitthe plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm.shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish.coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven).

CTN :45363413

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels

CTN :45326589

09 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items - dc motor:type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder: bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel supply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv):type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly :type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit :the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven).

Offset Printing Paper Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector