Latest offshore fabrication work Tenders | Government offshore fabrication work Tenders

Central Government / Public Sector

CTN :45388425

18 Jun, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of flowserve make control valve spares c c - assy, sliding seal, actuator, size 100/200, rotary, 4 stroke, backup ring, 15.50 od, dash #459, bearing, 1.25 stem, vldsk2, 2.50 l, metal, bearing, thrust, maxflo 4/3, 1"/1.50"/2", cl 150/600, bearing, thrust, maxflo 4/3, 3"/4", cl 150/600, bearing, shaft, maxflo 4/3, 1.50/2", cl 150/600, bearing, post, abd, 1.02 stem, maxflo 4/3, 3"/4", bearing, post, abd, maxflo 4/3, 1.50/2", cl 150/600, bearing, shaft, 1.18 stem, maxflo 4/3a, 3/4", dwgrev: 00; bearing, 0.75 stem, vldsk2, 1.63 l,, disk, vldsk2, 4", cl 150/300, disk, vldsk2, 10", cl 150/300, dwgrev: 00;kit, spare part, actuator, size 50, dwgrev: 00; kit, spare part, actuator, size 50, dwgrev: 00;kit, spare part, actuator, size 25, rotary, end post, maxflo 4/3a, 1.50/2", cl 150/600, 2 piece, press fit, 2 bolt, eco 16239, eco 16523, 18883, post assy, p, end post, maxflo 4/3a, 3/4", cl 150/600, 2 piece, press fit,, gasket, elastomer, 2.12 x 1.50, 0.06 thick, gasket, ptfe, 1.55 x 1.14, 0.12 thick, gasket, spiral, 11.12 x 10.38, 0.18 thick, gasket, spiral, 12.00 x 11.25, 0.18 thick, gasket, maxflo 4/3, 37mm x 27mm, 3.50mm thick, gasket, maxflo 4/3, 57mm x 45mm, 3.50mm thick, gasket, maxflo 4/3, 24mm x 18mm, 3.50mm thick, graphite, gasket, maxflo 4/3, 40mm x 30mm, 3.50mm thick, gasket, ptfe, 5.94 od, 5.38 id, .15 thick, gasket, ptfe, 5.345 od, 4.905 id, 0.094 thick, kit, shim, maxflo 3, 2", 150/300, kit, shim, maxflo 3, 3", 150/300, o-ring, dash #024, eco 15655, rubber, buna-n, o-ring, dash #459, eco 15655, rubber, buna-n, o-ring, dash #914, 1.28 dia, 0.12 wall, o-ring, dash #275, o-ring,, dash #159, packing set, twin, sureguard, packing set, twin, square, 1.25 stem, 1.75 od, vldsk2, packing set, single, sureguard xt, maxflo, 3"/4", packing set, twin, sureguard xt, maxflo, 1.50/2", plastic, pin, 3 deg taper, vldsk2, 4", cl 150/300, pin, taper, vldsk2, 10", cl 150/300, plug, maxflo 3, 2", cl 150/300, plug, maxflo 4/3, 3", cl 150/600, seal, grafoil, ribbon, 40" l, seat ret, maxflo 3, 2", cl 150/300, seat ret, maxflo 3, 3", cl 150/300, seat ret, vldsk2, 4", cl 150/300, seat ret, vldsk2, 10", cl 150/300, seat ring, maxflo 3, 2", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, maxflo 3, 3", cl 150/300, seat ring, vldsk2, 4", cl 150/300, seat ring, vldsk2, 10", cl 150/300, shaft, maxflo 4/3, 1.50/2", cl 150/600, shaft, maxflo 4/3, 3"/4", cl 150/600, shaft, vldsk2, extd, 4", cl 150/300, shaft, vldsk2, 10", cl 300, flowserve/logix 500 md+(520md+37-w1d300-000-0000), 3200md-28-d6-e-04-40-05-00, valtek lin.act., 25 sq.in with logix500 (actuator set), bare vlv sub asmbly 2",300w, maxflo 3, bare vlv sub asmbly 3",300w, maxflo 3, bare vlv sub asmbly 1.5" 300#, maxflo 3, bare vlv asmbly,p/n:817774.009,flowserve, bgl sphtm;dwgrev: 00;kit, spare part, actuator, size 50, rotary, hd spring, 3.25 stroke, mtl code n/a: se, dwgrev 000-ring, dash #237, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 00bearing, thrust, 1.00 stem, shrstrm, 6/8, a or sa-479-521800, nitronic 60 bar 8-inch centerless gro, dwgrev 000-ring, dash #257, rubber, viton a, 75/-5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 6, cl 150/600, inconel 625, work hardened to minimum tensile strength of 195 k, bgl me_fgdwgrev 04bearing, 1.12 stem, shrstrm, 2.00 l, metal, stellite #6 casting r30006 or wrought stellit, dwgrev 01pin, grooved, 0.19 dia, 0.50 l, a or sa-479-520910 xm-19 nitronic 50 strain hardened, up to 2.25 dia, dwgrev 000-ring, ...., dash #244, rubber, viton a, 75/- 5 durometer, indefinite shelf life purchase an, dwgrev 01seat ring, shrstrm, 3, cl 150/300, inconel 625, work hardened to minimum tensile strength of 195 k, ;dwgrev: 00; kit, spare part, actuator, size 200, rotary, 4 stroke, vr, mti code n/a: see drawing, p.o., or bo, dwgrev 00gasket, spiral, 1.44 x 1.06, 0.12 thick, gasket, spiral wound 316l windings, flexible graphite filler in, dwgrev 000-ring, .., dash #033, rubber, viton a, 75

corporations/Associations/Others

CTN :45510381

23 Jun, 2026 55.24 Lacs

Navsari - Gujarat

Tender For construction of fencing on c wall, control room building renovation, rcc road, yard pcc, metal spreading & ancillary civil work at 66kv morai-ii ss dist. valsad under navsari circle.

Central Government/Public Sector

CTN :45512816

23 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 45 )items as given below ,[1] scrapping,moorum over wbm surface 100.000 m2,[2] earth wrk,box cutg,175m 1400.000 m3,[3] dressing and chilchalling road flanks 100.000 m2,[4] disposal,debris 1000.000 m3,[5] lay bitumin macadam,hotmix plnt,15-20tph 1250.000 m3,[6] layg thk20mm premix carpet,hotmix palnt 84000.000 m2,[7] layg 6mm nominal thick premix carpet 84000.000 m2,[8] layg tack coat,wbm surface,4kg/10m2,m/c 20100.000 m2,[9] providing & laying tack coat over wbm 5000.000 m2,[10] layg tack coat,wbm surface,3kg/10m2,m/c 84000.000 m2,[11] providing & laying tack coat bituminous 168000.000 m2,[12] supply,sand including spreading 250.000 m3,[13] supply of moorum including stacking 20.000 m3,[14] labour f/spreading moorum to proper lvl 20.000 m3,[15] supply approve quality stone metal&stack 600.000 m3,[16] applg,thermoplastic paint 3600.000 m2,[17] instln 3m microprismatic lens cats eye 3000.000 ea,[18] scrapping, cleaning etc. 50000.000 m2,[19] supply approved quality slag metal&stack 180.000 m3,[20] extra over premix carpet for plastic use 21000.000 m2,[21] extra over seal coat for plastic use 21000.000 m2,[22] supply and installation of bumps 70.000 m,[23] dismantling of brick work 5.000 m3,[24] disman of pcc 5.000 m3,[25] disman,rcc 5.000 m3,[26] prvdg&placing,steel reinf 2.000 to,[27] rcc,w/down stone chips,1:1.5:3 10.000 m3,[28] flyash br wrk,230mm,m7.5,super sturcture 5.000 m3,[29] plaster,cement mortar,thk12mm 50.000 m2,[30] nmnl mix,m-15 cc w/grd stone,f/basement 5.000 m3,[31] ctrld cc grd m30 mix,gnd flr 20.000 m3,[32] supply,hume pipe,dia300mm 5.000 m,[33] prvdg,layg,jtng,r.c.hume pipe,450nb 5.000 m,[34] supply,hume pipe,dia500mm 5.000 m,[35] microsurfacing type-ii 7000.000 m2,[36] microsurfacing type-iii 3500.000 m2,[37] providing and laying 25mm thick mastic 10500.000 m2,[38] providing and laying dense graded bm 1260.000 m3,[39] providing and laying bituminous concrete 940.000 m3,[40] providg bituminous concrete with plastic 300.000 m3,[41] wet mix macadam base course 630.000 m3,[42] labour for spreading stone 630.000 m3,[43] labour for spreading slag metal 189.000 m3,[44] sweeping,road mechanically 10500.000 m2,[45] prvdg,shuttering 200.000 m2

corporations/Associations/Others

CTN :45302782

16 Jun, 2026 1.78 Crore

Dhanbad - Jharkhand

Tender For corrigendum : supply of godrej_arrive premium suite_back unit , godrej_gain pro_4 door personal locker unit , godrej _stylo computer table , godrej_versa neo mid back chair , godrej beat_non revolving chair , godrej_unitized mingle range av conference table_6 seater , godrej _cross revolving chair with large seat depth , godrej_versa neo visitor chair , godrej_beat high _ back revolving chair , godrej_la sede high back chair , godrej_cignus table 1800w with eru_main desk , godrej_pisa 3-seater sofa , godrej- kalista- 2 door wardrobe with drawer , godrej-premium lounge metal sofa _steel - l43 for waiting area , godrej_hero - mattress - single bed , godrej_adriana single bed _wooden , godrej _grande dinning chair , godrej - adriana - bedside table , godrej - adria work desk cum study table_wooden , godrej - la sede - visitor chair , godrej - adriana - 2 door wardrobe _wooden , table dressing, zurina_ wenge_ dressing table with stool , godrej - arrive previum suite - main desk , godrej - unitized mingle range av conference table _14 seater , zurina 3 door wardrobe _ code- 5116877-13116845814 , godrej -parto plus 3-seater sofa , godrej - unwind cafe chair_ss understructure for dining table , godrej luft 3-seater terminal chair for waiting area , godrej - cignus premium suite , godrej - unitized mingle range av conference table_10 seater , godrej-topaz table_2350w-main desk with side unit and pedestal , godrej time out 8 seater pu coated canteen table , godrej pisa 1-seater sofa , godrej pisa center table , godrej - radiance single sided book rack , godrej topaz premium suite - main desk with side unit and pedestal , godrej - topaz premium suite back unit - 4 , godrej - posture perfect high back chair , godrej - gain pro_2 door personal locker unit , godrej - restomatic single mattress , godrej - radiance double sided book rack , godrej - adriana double bed - wooden , godrej - opulent advanced dinning chair , godrej - ascent - main table with eru and pedestal , godrej - fiona single bed _steel , godrej - elixir round dining table _4 seater , godrej - ray - bedside table , godrej - grande pro 6 -seater dining table , godrej - marvel high back chair , godrej - marvel visitor chair , godrej - elegance av-modular conference table_large - v1 head module_part , godrej elegance av-modular conference table _large , godrej - table height storage unit , godrej - emerald high back chair , godrej - bloom centre table , godrej - parto plus 1- seater sofa , godrej - parto plus 2- seater sofa , godrej - bloom corner table

corporations/Associations/Others

CTN :45524776

29 Jun, 2026 3.85 Crore

Bhavnagar - Gujarat

Tender For work of metal grouting of 18 meter tp scheme no.06, road in kaliyabid sidsar adhevada ward

corporations/Associations/Others

CTN :45524782

29 Jun, 2026 59.18 Lacs

Bhavnagar - Gujarat

Tender For metal grouting work from virani circle to nachiketa school in kaliyabid-sidsar-adhewada ward.

CTN :45532704

25 Jun, 2026 8.24 Lacs

Indore - Madhya Pradesh

Tender For metal patch work after laying of mooram and crushed stone for solution of mud problem on necessary places in rainy season in ward no. 16 under zone no. 01

CTN :45532710

25 Jun, 2026 9.80 Lacs

Indore - Madhya Pradesh

Tender For metal patch work for solution of mud problem on various places in ward no. 35 under zone no. 22

CTN :45532712

25 Jun, 2026 10.44 Lacs

Indore - Madhya Pradesh

Tender For metal patch work for solution of mud problem at kumedi village, narval village, ramdutt ka bhatta and other listed places in ward no. 19 under zone no. 17

CTN :45532714

25 Jun, 2026 3.66 Lacs

Indore - Madhya Pradesh

Tender For metal patch work after laying of mooram and crushed stone for solution of mud problem on necessary places in rainy season in ward no. 10 under zone no. 01

Offshore Fabrication Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others