Latest oil level gauge Tenders | Government oil level gauge Tenders

State Government

CTN :45730108

08 Jul, 2026 NA

Khaperkheda - Maharashtra

Tender For procurement of various valves for unit no 1 during aoh. - non return valve (kirloskar) 50 mm flang, oil level gauge assy for gearbox, blr cm xrp803 drive/gb union orifice, ball valve cs comp asly, ball body cs comp vlv, ball body ss 65 mm valve assy.

corporations/Associations/Others

CTN :45419802

04 Jul, 2026 1.03 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of id fd pa lube oil system - press relief valve-dg mc 3 pt bw b 41 , suction strainer ss 30 , strainer ss 60 l 1inch bsp 125 micron , 01040502 filter element 2.32 gm25.2p fdf , filter element for du40 hc voith , 01020801 oil level gauge sg-10 , oil level gauge sg-5 make-hydax

Central Government/Public Sector

CTN :45728154

15 Jul, 2026 NA

Kalyan - Maharashtra

Tender For supply of set of oil level gauge r-2 complete for wag-9/ wap-7 locomotive as per clw drawing. no. 1209.01.313.016. each unit consists of 04 items in 07 nos. as per 1) body, clw drawing. no. 1209.01.413.017. qty.= 01 no. per set (2) perforated thread piece, clw drawing. no. 1209.01. 413.018. qty.= 01 no.per set (3) glass disc clw drawing. no. 1209. 01.413.019. qty.= 01 no. per set (4) rubber seal, od/id/thickness = 44.5/40/2.5 mm qty. = 04 nos. per set ]

Central Government/Public Sector

CTN :45709858

20 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of fuel oil level gauge assembly to dlw drg. no. tpl-0379, alt. f (sheet 1 of 5, part no. 11440028/for line-1) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45148157

13 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of sight glass 1 as per atc , sight glass 2 as per atc , sight glass 3 as per atc , sight glass 4 as per atc , sight glass 5 as per atc , sight flow indicator 1 as per atc , sight flow indicator 2 as per atc , oil level indicator 1 as per atc , oil level indicator 2 as per atc , oil level indicator 3 as per atc , oil level gauge galss 1 as per atc , oil level gauge galss 2 as per atc

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45682021

03 Aug, 2026 NA

Asansol - West Bengal

Tender For supply of spares for slip gauges consisting of range 3.0mm, 3.1mm, 3.2mm, upto 5mm (in incremental of 0.1 mm), total of 21 nos, along with calibration certificate.thickness 10 to 20 mm, length 200 mm, material: en19, hardness 55-60 hrc, all gauge surfaces to be ground, sharp corner to be removed. [ warranty period: 30 months after the date of delivery ] ]

CTN :45689893

25 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of 45 types of gauges for extractor - chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , chamfer gauge for extractor , gap limit gauge , gap limit gauge , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge for extractor , gap limit gauge , hole depth gauge for extractor , plug gauge for extractor , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge , plug gauge for extractor , plug gauge for extractor , position gauge , position gauge for extractor , position gauge for extractor , position gauge for extractor , profile gauge for extractor , radius gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , slip gauge for extractor , slot depth gauge for extractor , slot depth gauge for extractor , support for extractor , chamfer gauge for extractor , position gauge for extractor , position gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor , receiver gauge for extractor