Oil Pan Tenders

Tender For supply of gasket for flange welded joint (pipe to equipment) for 20 mm nb pipe on air brake system to rdso drg. no. wd- 83062- s- 07, alt. 6, item-1 and rdso spec. no. 04-abr-2002 (rev. 01 of nov'2017). [ warranty period: 30 months after the date of delivery ]

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government/Public Sector

Tender For auction sale of depot non ferrous scrap - scrap condemned released various types mix aluminum parts released from electric locos. consisting of piston , ac cooling parts, cp, air brake cylinder of truck, filter of truck, radiator etc. (released form mw ii section ) parat, measure 01 litre, 100 ml, cooker, (released from canteen items) pneumatic valve body, wind screen frames, pan class="text-red-selected">oilpan> cooling component of main transformer (radiator) ,axle box housings,split,earth,dummy cover, & outer labyrinth ring, pan class="text-red-selected">oilpan> seal , horn, and various miscellaneous locos and non-locos items with minor ferrous attachment in sort and sizes & other broken part of aluminum equipment, panto pan, blower & parts, filter plate, crank & other miscellaneous items.

Central Government / Public Sector

Tender For corrigendum : auction sale of depot ferrous scrap - 12274ms26a, 98050175, quantity- 93.975 mts scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms bpan class="text-red-selected">oilpan>er cpan class="text-red-selected">oilpan> cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater cpan class="text-red-selected">oilpan>,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 273 to 276, left side of road no- 2 hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988

Central Government And Public Sector

Tender For auction sale of depot ferrous scrap - fms of loco/non loco pan class="text-red-selected">oilpan> pan machining assembly (04 no.) and other similar items . weight is in approx. . if gas cutting is required it is allowed for loading purpose only subjected to the following conditions: purchaser should ensure that availability of fire extinguisher, water bucket etc at delivery point. witnessing staff should be present while gas cutting is in progress. photographs available on ireps note: purchaser to submit power of attorney (poa) in uploaded format on ireps portal (purchaser can reach the said poa format in ireps through " document -> view & publish depot condition -> click for blw /gsd dlw document list -> action (view condition) ")

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, undersling water tank, sand box, flat, trough sheet, coach cut up parts, ms tank, grill gate, rolling shutter, bench test, wheel with plate, bins, roller of shutter, regulator empty box, sliding doors, dolley,platform shelter, engine base rail of demu, collapsible gate, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam with composite brake blocks, gi sheets, pipe 8"(ductile)inside thin layer of concrete in full pipe&negligible quantity of rubber beeding, square &rectangular tubes & galvanised sheets, ms grill gate,grill window &stair case handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering, cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, s&t panels, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 5 & 6

Tender For supply of ek3000b-3011712 screw captive washer cap , ek3000b-3011713 screw captive washer cap , ek3000b-3017572 lever rocker , ek3000b-3019204 bearing main , ek3000b-3020187 seal pan class="text-red-selected">oilpan> , ek3000b- 3020189 seal pan class="text-red-selected">oilpan> , ek3000b-3022209c2 element connection , ek3000b-3026797 motor air starting , ek3000b-3029847 seal o ring , ek3000b-3034986 seal rectangular ring , ek3000b-3035198 cap dipstick , ek3000b-3040837 screw capative washer cap , ek3000b-3042745 guide valve , ek3000b-3049332 clamp injector , ek3000b-3060613 hose plain , ek3000b- 3063809 clamp t bolt , ek3000b-30363810 clamp bolt for intake manifold , ek3000b-3065944 screw capative washer cap , ek3000b-3066914 seal o ring , ek3000b-3069103 gasket fuel pump , ek3000b-3069177 gasket turbocharger , ek3000b-3076522 gasket water pump , ek3000b-3077199 gasket hand hole , ek3000b-3077200 gasket rocker lever housing , ek3000b-3077201c5 gasket aft housing , ek3000b- 3078124 gasket hand hole , ek3000b-3089056 seal water pump , ek3000b-3096685 piston , ek3000b- 3099083 gasket pan class="text-red-selected">oilpan> pan , ek3000b-3168267 pressure gauge s w 0-60 psi , ek3000b-3200316 hose plain , ek3000b-3231403 hour meter , ek3000b-3231408 tachometer , ek3000b-3238194 kit piston ring set v- 28 , ek3000b-3240573 valve solendid , ek3000b- 3331472 switch coolant level , ek3000b-3392992 gear , ek3000b-3401544 element lub pan class="text-red-selected">oilpan> filter , ek3000b-3406702 sleeve injector , ek3000b- 3413682 nipple plain hexagon , ek3000b-3414587 hose flexible , ek3000b-3519827 gasket turbo charger , ek3000b- 3634390 hose flexible , ek3000b- 3637209 indicator restriction , ek3000b-3678925 seal o ring , ek3000b- 3803615 seal kit , ek3000b-3873915 cap air cleaner , ek3000b-3873989 gauge pressure , ek3000b-3875221 coupling plain hose , ek3000b-3875359 harness wiring , ek3000b-3878763 pulley idler , ek3000b- 3879488 kit super by pass filter element , ek3000b- 3880383 set gasket upper engine , ek3000b-3880384 seal gasket lower engine , ek3000b-3902460 screw hex flange head cap , ek3000b-3908615 cartridge lub pan class="text-red-selected">oilpan> filter , ek3000b-3909696 manifold fuel , ek3000b-3916065 tube sea water pump , ek3000b- 3918257 gasket filter head , ek3000b-3937613 clamp hose , ek3000b-4025645 pump fuel tln , ek3000b- 4058965 resistor corrosion , ek3000b-4071823 gauge temperature , ek3000b-4071825 gauge temperature , ek3000b-4073133 camshaft , ek3000b-4073134 camshaft , ek3000b-4083951 camshaft , ek3000b- 4105567 isolator vibration , ek3000b-4105897 gauge sight , ek3000b-4345098 diode , ek3000b-4345114 diode , ek3000b-43828 b clamp hose , ek3000b-4892795 bearing connecting rod , ek3000b-4911528 pump water , ek3000b-4911777 pump sea water , ek3000b- 4912321 gasket cylinder head , ek3000b-4912771 pump sea water , ek3000b-4943979 rod engine connecting , ek3000b-4959089 gasket cylinder head , ek3000b-4962857 switch temperature , ek3000b- 4963202 plug zinc electrod , ek3000b-4963231 gasket heat exchanger , ek3000b-4963232 gasket heat exchanger , ek3000b- 4963243 transceiver , ek3000b- 4979720 pump lubricating pan class="text-red-selected">oilpan> , ek3000b-504544 belt vee , ek3000b-504544k0 v belt b51 b1340for seawater pump , ek3000b-5264569 gasket pan class="text-red-selected">oilpan> drain , ek3000b- //bid details 2 / 130 64775 hose plain , ek3000b-67185 hose plain , ek3000b-69654 gasket water inlet connection , ek3000b-ak1002740ss hose flexible , ek3000b- ak10050ms hose flexible , ek3000b-ak10052ss hose flexible , ek3000b-ak10065ss hose , ek3000b-ak10120 hose flexible , ek3000b-ak10120ss hose flexible , ek3000b-ak160236ms hose flexible , ek3000b- ak16030ss hose flexible , ek3000b-ak4008ms hose flexible , ek3000b-ak4012ms hose flexible , ek3000b- ak4016ss hose flexible , ek3000b-ak4030ms hose flexible , ek3000b-ak4065ss hose flexible , ek3000b- ak5030ss hose flexible , ek3000b-ak5080ss hose flexible , ek3000b-ak6065 ss hose flexible , ek3000b- ak8065ms hose flexible , ek3000b-am1003000sss hose assembly , ek3000b-am10036ss hose flexible , ek3000b- am10048ss hose flexible , ek3000b-am6018ss hose flexible , ek3000b-ar324761400 elbow , ek3000b-ar8630 flo