Get complete information related to latest Oil Absorbent Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Oil Absorbent Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Oil Absorbent Tenders.
Tender For supplying of fire fighter instrument - dry chemical powder 6 kg a.b.c., type stored pressure isi mark fire extinguisher stos pressure type bis-15683, co2 type fire extinguisher 4.5 kg, isi mark as per bis:15683, chlorine gas detector alarm with battery operated, stand alone type smoke detector alarm with battery operated, refilling of following fire extinguisher(inciluding all charges like transportation,receiveng,delivering,installation,etc), hydrotest of following fire extinguisher (abc 6kg & co2 4.5 kg), canvas hose fire; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 15 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 15m with ss coupling., canvas hose fire; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 30 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 30m with ss coupling., reinforce rubber line hose fire ; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 15 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 15m with ss coupling., reinforce rubber line hose fire; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 30 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 30m with ss coupling., synthetic hose fire ; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 15 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 15m with ss coupling., synthetic hose fire; 63 mm , 15, is636-1988, type b hose, fire; inside diameter:63 mm, length: 30 m, standard: is 636-1988; fft: type b, with ss coupling hose fire; 63mm, 30m with ss coupling., afff form compound isi mark 20 litre packing, personal protective equipment, gum boot steel toe type, fireman safety helmet (frp open type) flame retardant rubber outsole, fuei oil resistant sole suilable for inimical environment, with stand 18 kv of life current at dry condition, cold insuilation sole construction, (in with standerd, ansi, ce, fda, etc.)nfpa - 1971 - 2013, spectacles, frameless with 99.9 percentage uv protected scratch 7 impact resistant polycarbonate clear lens (isi or ce marked), supported hand gloves having black polyester liner 13 gauge with black pu coating smooth finish and yellow elastic., 11 kv electrical hand gloves (with certificate), disposble surgical gloves, 150 gms ifr coverall with collar, front zipper closere with flap, two chest pocket with fr velcro closure flap, one hip pockets with fr velcro closure flap, one tool pockets on right leg, two lateral pockets, plain straight cuff and elasticated waist, pen holder and spectable holder, color-navy blue,, led search lights range 1 km rechagable, ba servicing, hydrotest of ba cylinder 300 bar 6 ltr, refilling of ba cylinder 300 bar 6 ltr, chlorine kit isi marked, rope rescue kit, 1 ton capacity rope (synthatic fire export quality), full body harness, half body harness, karabiner, fiture of 8, d sender, a sender, single pully & double pully, prisek loop, red sealling & blue sealling, breathing apparatus (ba set) 300 bar pressure 6 ltr, breathing apparatus (ba set) 300 bar pressure 6.8 ltr with composite cylinder, fireman axe (is:926), celling hook, ba set servicing & maintenance, ba set repairing, spare parts f ba set & fire extinguisher, life jacket mmd approved, ring boya mmd approved
Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn
Tender For procurement of personal protective equipment for officers and employees of stps, sarni. - personal protective equipment for officers and employees, industrial safety shoes mechanical, industrial safety shoes electrical, industrial safety helmet white colour, safety hand gloves for heat resistance, safety hand gloves for chemical work (acid-alkali proof), safety goggle for dust particles protection, safety mask for coal dust, electrical hand gloves (0.4kv), electrical hand gloves (6.6 kv), electrical hand gloves (11 kv), caution danger ribbon / barricading roll, full face mask with cartridge, safety eye wear for chemical handlng, hand gloves for handling oily surface, ear muff, safety net (10 x20 sq meter), electrical arc flash protection face shield, chemical protection suit
Tender For procurement of personal protective equipment - aluminium proximity hood only , full face respirator , nitrile hand gloves , rubber hand gloves , heat resistant hand gloves , nitrile coated cut resistene hand gloves , electrical hand gloves , aluminised para aramid hand gloves , para aramid apron without sleeves , aluminised apron with sleeves , aluminised apron without sleeves , pvc chemical protective apron , para aramid full suit , aluminized proximity full suit , alumaster aluminised molten metal shoes , alumaster aluminised aramid leg guard , para aramid sleeves , personal electrical lockout tagout tool box kit , safety dangri
Tender For corrigendum : design engineering manufacturing testing inspection as per approved qap supply delivery of personal protective equipment first aid equipment safety instrument as per oisd 117 and approved documents for our coit project nrl paradip and odisha