Web Analytics Made Easy - StatCounter

Oil Chiller Tenders

Get complete information related to latest Oil Chiller Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Oil Chiller Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Oil Chiller Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :43865512 Due date: 25 Feb, 202625 Feb, 2026 NA
Tender For bid to ras supply of contact for 11 kv god and 200 or 400 amp rashtriya or jb or l and t set of 3 , louver shutter for 400 or 450 mm exhaust fan as per sample , louver shutter for 250 or 300 mm exhaust fan as per sample , backlite sheet 4 inch x 4 inch prelaminated , bakelite sheet 10 inch x 12 inch prelaminated , batten holder make anchor or c and s or ge lighting or havells or cg , cold shrinkable type outdoor termination joint kit for 11 kv size 95 sqmm 3 core make denson , heating element for geyser cup thread type 2000 w make aristo or thomson or bajaj , jumper or washer 20 mm , thermostat for geyser 25 or 35 or 50 ltr capacity make ae or bajaj or havells as per sample , tape insulation 20 mm x 20 mtr long make steel grip or anchor , door bell ding dong 240v 50hz , fan capacitor 2 point 5mfd 240v , fan capacitor 3 point 15mfd 240v , fuse wire 60 amp or 100 amp or 200 amp , gas r 134a 450 gm per can , geyser heating element triangular shaped isi marked incoloy material with glass lined coating 1500w , decorative post top lantern for 360 degree indirect light resistant to impact and corrision ip 65 protection of cap 40watt , distilled water 1 ltr pack , epr ht insulation tape 50 mm wide 09 m long , fan blade for desert cooler 450mm , gland dori 14 mm , gland dori 6 mm , aluminium lugs 120 sqmm , aluminium lugs 150 sqmm , aluminium lugs 185 sqmm , aluminium lugs 35 sqm , aluminium lugs 50 sqm , aluminium lugs 70 sqm , copper alloy thimbles 1 sqmm pin type pkt of 200 nos , copper alloy thimbles 1 point 5 sqmm pin type pkt of 200 nos , copper alloy thimbles 2 point 5 sqmm pin type pkt of 200 nos , copper alloy thimbles 4 sqmm pin type pkt of 200 nos , copper alloy thimbles 6 sqmm pin type pkt of 100 nos , aluminium thimble or lugs long barrel of size 95 sqmm , aluminium thimble or lugs long barrel 100 mm of size 300 sqmm , aluminium thimble or lugs of size 16 sqmm , cable joint kit cold shrinkable 185 sqm 3 core , aluminium thimble or lugs long barrel of size 120 sqmm , aluminium thimble or lugs of size 25 sqmm , aluminium thimble or lugs of size 50 sqmm , copper lugs long barrel 100 mm size 185 sqmm make dowells or action or ascon , copper lugs long barrel size 150 sqm make dowells or action or ascon , copper lugs long barrel size 240 sqm make dowells or action or ascon , copper lugs size 16 sqm make dowells or action or ascon , copper lugs size 25 sqm make dowells or action or ascon , copper lugs size 35 sqm make dowells or action or ascon , copper lugs size 50 sqm make dowells or action or ascon , copper lugs size 95 sqm make dowells or action or ascon , copper lugs size long barrel 100 mm 120 sqm make dowells or action or ascon , copper lugs size long barrel 100 mm 300 sqm make dowells or action , alumn cable lugs 150 sqmm , alumn cable lugs 240 sqmm , copper cable lugs 150 sqmm make havells , copper cable lugs 35 sqmm make havells , copper cable lugs 70 sqmm make havells , flexible copper cable 2 point 5 sqmm twin core for geyser 100 mtr roll make kalinga or plaza or havells , coolant for dg set , heating element for geyser cup or thread type 2000w make aristo or thomson or bajaj , heating element geyser 1 point 5 kw make usha or bajajlead ring suitable for 150 mm dia , lead ring suitable for 200 mm dia , lead ring suitable for 80 mm dia , tinned copper fuse wire 60 amp, tinned copper fuse wire 30 amp, tinned copper fuse wire 20 amp, tinned copper fuse wire 10 amp, submersible pump spec as per boq document, sleeve for copper pipe, batten holder make anchor c and s ge lighting havells cg, battery lead 1 mtr long spec as per boq document, battery lead 2 mtr long spec as per boq //bid details2 / 69

State Government

CTN :44172608 Due date: 28 Feb, 202628 Feb, 2026 NA
Tender For annual maintenance contract for servicing & maintenance of indoor, outdoor air conditioner & water cooler maintenance at colony & em-ii, 250mw tps, parli-v

Central Government/Public Sector

CTN :44132058 Due date: 02 Mar, 202602 Mar, 2026 2.56 Lacs
Tender For providing of customized amc/cmc for pre-owned products - servicing & repairing of oil chillers, electrical & operator panel a/cs installed on cnc, plc & drive retrofitted critical machines; as per nit; annual maintenance contract (amc); as per nit; no

Central Government / Public Sector

CTN :44151561 Due date: 02 Mar, 202602 Mar, 2026 NA
Tender For auction sale of depot miscellaneous scrap - hec surface wheel lathe machine: (pl-98325012) cond. u/s. hec surface wheel lathe machine in dismantled condition. model no: lw140-b4, sl. no:727-013, m&p no.3112193. quantity- 01 no. machine contained following electrical items :1) hydraulic power pack motors 7.5 hp -02 nos; 2) main spindle motors 73.7 hp-02 nos; 3) head stock lh&rh movement motors 10 hp-02 nos; 4) motor copper cables. with/without spare parts/attachments. total gross weight- 47700.00 kgs. approx., (copper content:163.000 kgs approx. and other ferrous weight:47537.000 kgs. approx.). ds8 no.095266-25-01894 date:14.10.2025. custodian- sse/mw/crs/tpty, controlling officer- cwm/crs/tpty. note: 1) excluding items [1) control panel-02 nos,2) servo voltage stabilizer-01 no,3) oil chiller unit-01 no, 4) lubrication motor- 04 nos, 5) linear encoder with dro-01 no, 6) hmi panel-01 no, 7) hydraulic pump of power pack-01 no, 8) gear box lubrication pump-01 no, 9) spindle lubrication pump-01 no, 10) flexible coupler -01 no.] to be returned to railways by the purchaser/representative. 2) delivery on number basis only. 3) gas cutting permitted to facilitate loading. hsn code-84589990, gst-18%. special note:1) custodian should make the premises clear to facilitate easy loading of the material. he should allow the vehicle inside, up to the location without any hindrance to the movement of vehicle of the purchaser; 2)purchasers are advised to physically inspect the lot before bidding as the lot is located inside the workshop and the sale is on "as is where is basis"; 3) purchaser is advised to bring all the required equipment for gas cutting & loading. 4)purchasers are responsible for providing adequate fire extinguishers & safety equipment on the spot at the time of cutting & delivery of the lot. 5)purchasers should make necessary arrangements to load the sold lot without causing interruption to day-to-day maintenance activities of the shop. 6) physical weighment is not done and not possible, weighment assessment has done by custodian as per old files and condemnation records available with him. location: in open yard west side of wheel shop-crs/tpty.

CTN :44140307 Due date: 27 Feb, 202627 Feb, 2026 5.89 Lacs
Tender For maintenance of electrical installation & fans repair maintenance of booster p/sets, ro, swhs, ac appliances , refrigerators, desert cooler & water coolers etc. in the r/o hmps bungalows under ferozshah road sub division-1, ded-201. (sh: supply, installation, testing and commissioning of decorative outdoor luminaries)subwork/packages:sitc of decorative outdoor luminaries.

CTN :43901457 Due date: 26 Feb, 202626 Feb, 2026 NA
Tender For corrigendum : supply of tables of size 1 , tables of size 2 , tables of size 3 , conference room table , almirah of size 1 , almirahs of size 4 , almirahs of size 5 , drawer units of size 1 , drawer units of size 2 , drawer units of size 3 , chairs size 3 , chairs of size 5 _conference room chairs , chairs of size 5 _visitors chair set of 3 , sofa of size 4 , lcd units of size 3 , lcd units of size 4 , lcd units of size 5 , lcd holders , fridge , water cooler , ro unit , coffee dispenser , microwave , stove , locker , steel box containers , air conditioners split ac indoor unit , air conditioners split ac outdoor unit , window ac , window curtain blinds , hall partition wooden frame , ups system , battery bank , diesel generator , telephonic electronic system , network and cables , cctv system , co2 extinguishers _4. 5 kg , dcp extinguishers _10 kg , xerox machine , miscellaneous items , transit insurance , liasion services , restoration services , optimiser , desktop computers

Corporations And Associations And Others

CTN :43854131 Due date: 26 Feb, 202626 Feb, 2026 NA
Tender For corrigendum : for the disposal of unserviceable material - list of unservicable material lying in the store, poly film pouch scrap, gatta scrap, polythene liner 25 kg smp old, kraft paper bags smp25 kg old, plastic trays old, transport scrap, iron scrap, aluminum can old, aluminum lid scrap, ball bearing assorted size old, electric scraps, gun metal scrap, plastic rubber scrap, battery assorted size scrap (big), battery assorted size scrap (small), empty ghee tin ltr, 1 ltr, 2ltr, 5 ltr, wmp tin 1/2 kg, 1 kg, ghee ceka carton (500 ml and 1000ml), empty ghee tin 15 kg / wmp tin 10 kg, jerry can plastic cap. 50 ltr. / 70 ltr./ 25 ltr. / 35 ltr., plastic bag (empty), ghee pouch polyfilm upto 100ml, steel can capacity 40 litre. scrap, stainless steel scrap, tyre 1000-20 & tubes flaps assorted size, tyre 825-20, 700-15, 215/75 r75 motor cycle tyre etc.& tubes flaps assorted size, compressor assorted size, deep freezer/ice candy/chest cooler, computer spare parts/scrap, weighing scale cap 200kgs, dahi cup/ kheer cup broken, visi cooler, freeze, centrifugal machine, polypropylene bottle scrap, no need to enter rate, ceiling fan /wall fan, motor (20 hp), moisture analyser, bag closer machine, glass scrap, air cooler, thermo coil, muffle furance, sfm shrink tunnel machine, crown capping machine, weighing scale assorted size, white butter liner, plastic water storage tank, solar system, can scrubber machine, commercial ro, iron press, strapping machine, geyser cap 25ltr, dg alternator, remi centrifugal, washing machine, air conditioner split, air conditioner (window), gear box, fan motor, indoor & outdoor fan, inverter, exhaust fan

CTN :44104389 Due date: 19 Mar, 202619 Mar, 2026 1.14 Crore
Tender For providing of cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; floor cleaning by dry sweeping and collecting & dumping the waste; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; floor cleaning by mechanized/manual scrubbing, collecting the waste & dumping; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; floor cleaning by mechanized/manual scrubbing , collecting the waste & dumping; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; floor cleaning by dry sweeping followed by wet moping; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; washing of canteen floor by applying detergent; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed bandel; washing of toilet (total 20 nos) and drinking water cooler; both indoor

CTN :44051391 Due date: 10 Mar, 202610 Mar, 2026 1.23 Crore
Tender For providing of cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; floor cleaning by dry sweeping and collect & dump the waste; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; floor cleaning by mechanized/manual scrubbing; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; floor cleaning by mechanized/manual scrubbing; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; floor cleaning by dry sweeping followed by wet moping; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; washing of canteen floor by applying detergent; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome based - emu carshed howrah; washing of toilet (total 18 nos) and drinking water cooler; both indoor and outdoor,cleaning, sanitation and disinfection service - outcome ba

CTN :44024090 Due date: 07 Mar, 202607 Mar, 2026 NA
Tender For non comprehensive maintenance of panel ac and oil chiller of cnc machines as per scope of work no. 11
 Loading, Please wait...

Connect us via What's Up