Latest oil cylinder Tenders | Government oil cylinder Tenders

State Government

CTN :42952262

22 Dec, 2025 37.00 Lacs

East Nimar - Madhya Pradesh

Tender For procurement of various size of knife gate valves with pneumatic cylinder actuator for ash handling plant of 2x660 mw, sstpp, mppgcl, dongalia. (on open offer basis with limited make)

corporations/Associations/Others

CTN :42568222

05 Dec, 2025 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of 80nb ash discharge valve assembly with pneumatic cylinder , 50nb ash discharge valve with pneumatic cylinder

CTN :42922643

10 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment:chromatographic workstation with capillary injector, packed injector, and auto-sampler should be quoted. chromatography workstation instruments should be built with self-diagnostic features and active-time management tools for better productivity, general features of chromatography workstation: column oven can accommodate two columns with maximum temperature range up to 400 c with set point resolution of 0.1 c. it should support 20 ramps & maximum temperature ramp rates of 100 c /min. cool down of oven from 400 c to 50 c in less than 5 min. fully automated with electronic pneumatic control afc / ppc / epc (digital control) for injector gas afc/epc/ppc should provide optimum performance with all types of capillary columns. system should have the capability to install a minimum of three injection and four detector ports. capable of detecting h and o across 0.01% 100% ranges (i.e., both trace in a matrix and bulk near-pure streams) column oven: operational temperature range: ambient +10 to 400 c overheat protection: programmable up to 420 c injector port: split/spitless injector 1 no packed injector 1 no, maximum temperature: 400 c, pressure setting range 0 100 psi with control setpoint of 0.01psi for specified pressure range., carrier gas flow control should have constant flow, constant pressure modes and constant linear velocity. auto injector: automatic sample injector up to 15 vials 2 ml vial with crimp set 100 nos, detector: flame ionisation detector (fid) 1 no, minimum detectable quantity: 3 pgc/s or more liner dynamic range: 1 107, maximum acquisition rate: 4 ms (250hz), thermal conductivity detector, sensitivity: >40000 mv maximum acquisition rate: 4 ms, maximum operating temp: 400 cgas cylinders & fittings, gas sampling: zero air, h2, n2 and helium gas cylinder with 2-stage regulators, each 1 no. four-stage gas purification panel and gas tubing. quote a suitable gas sample injector apparatus for the analysis of co2 gas, gas standards and a suitable packed column quote a 6-port gas sampling valve suitable for both manual (through syringe) and auto injection (online) quote sample line, sample loop, heated lines, filters, safety hydrogen purging, and flow control of gas. calibration gasses: suitable gas standards such as ar, he, h2, o2, co and ch4 should be providedpc and ups: pc i5 (or higher), 8gb ram, 1tb hdd, 22-inch led monitor (or higher), ssd: 512 gb, windows 10 os (or higher), wired keyboard and mouse. laser printer b/w, online ups sine wave capacity of 5 kva with battery power backup of 1 hour should be provided by the supplier general terms and conditions:warranty: 3 years manufacturer s warranty certificate. vendor should be an authorised provider of sophisticated high-precision chromatograph workstation systems for the past 15 years or more with: a proven track record in multiple countries and national institutes standard quality certifications such (iso 9001) 5+ past installations of similar systems in india. compliance statement should be enclosed with the quotation. the installation should be done at free of cost. hands-on training for 1 day for two trainees (faculty and scholars) must be provided on operation, maintenance and troubleshooting to two to two-three persons at the site of installation. if required, hands-on training must also be given to our faculty/scholars at a later stage, without any financial commitment to university. the technical details of the quoted instrument must be available on the official website of the principal supplier. the vendor should provide the list of end-users (recent) with contact details. the vendor must submit the latest reference letters from their previous users. trained service engineers in india (with suitable certificates) for the quoted model must be readily available to resolve the technical problems. a list of recent scientific publications in reputed journals from the user institutions where the quoted mode

Central Government/Public Sector

CTN :42970267

19 Dec, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of procurement of spares for 05 ton capacity godrej forklift gx500d xb stationed at haddo and dry dock e e - ps piston ring gx kit 02093730 part no mh 02011048 , air cleaner pa primary filter part no mh36500059 , air cleaner secondary filter part no mh36500060 , eng pa fg lf16061 oil filter part no mh36313214 , piston ring gx kit 02093730 part no mh02009580 , cable engine stop item code mh02643045 , assembly turbo charger part no mh36313383 , pedal accelerator part no mh 36500070 , cable fwd rev hi low part no 71400003 59076399 , alternator 12v 35amps part no 36313276 , piston ring outer clutch ring part no 02010252 , hose tlv to tilt cyl lh front part no 39550875 , bearing drive axle hub inner part no 54031762 , gasket control cover housing part no 02014391 , piston ring inner clutch ring part no 02010054 , hose tlv to tilt cyl lh rear part no 39550877 , piston part no 02009986 , gasket case cover plate part no 02014317 , piston ring stator support part no 02009551 , hose tlv to tilt cylinder rh front part no 39550874 , hose pump to steering unit part no 39550863 , sleeve oil distributor part no 02049539 , hose tlv to tilt cylinder rh rear part no 39550876 , selector pack hilo or selector pack forward reverse part no 02047197 , hose danfoss unit to stg cylinder part no 39550864 , piston ring oil distributor part no 02009580 , trust washer part no 02010195 , piston ring rear input shaft part no 02009564 , clutch disc inner part no 02041025 , clutch disc outer ar part no 02040619 , oil distributor piston shaft part no 02011035 , end plate part no 02020448 , snap ring pinion shaft oil distributor part no 53522582 , bearing drive axle hub outer part no 5400059 , seal kit for lift cylinder of 5 ton forklift , sheave item code mh 02205153 , universal joint assy code mh 02098793 , single brake valve part no mh 02099787 , pneumatic servo part no mh 37200016 , fork lock pin clip type part no mh 38800580 , spring gas part no mh 38600002 , oil seal 39 7 x 60 3 x 9 52 , transmission overhauling service kit part no mh 02093730 , roller bearing assembly code mh 02326191 , side thrust roller code mh 02340436 , transmission assembly with axle adapartor part no mh02335360 , control cover assy part no mh02018740 , gasket control cover housing part no mh 02014391 , gasket transmission to engine part no mh 02161129 , bearing part no 54100356 , oil seal part no mh02076458 , automatic drain valve part no 02099761 , silent block assy part no mh02161356 , head light part no mh71500763 , tail light lh part no mh71500764 , tail light rh part no mh 71500765 , ignition switch part no mh 71500275 , assy clamping rod part no mh 36312233 , bolt part no 36312244 , spring part no mh 36312246 , bearing part no mh 02163839 , roller part no mh 02168339 , spherical bearing auto bush rotating part no mh02950307 , catridge fuel water seperator part no mh36313378 , rod end part no mh02319564 , radiator part no mh 38150062 , pump main part no mh97549660 , steering unit danfoss ospc 160 part no mh39300009 , starter motor part no mh36312241 , knuckle pin part no mh02644639 , thrust bearing on knuckle part no mh54080773 , nut wheel mounting part no mh60300014 , filter casting part no mh02219024 , valve main walve oil 2 spool part no mh39100160 , lift cylinder canara 5500 mfg part no mh39400857 , fork assy 2000mm long part no mh97126891 , water pump repair kit part no mh36313308 , carriage assembly 2340 mm length , cable fwd rev hi low part no 71400003 , pipe radiator part no 02006899 , universal joint assy code mh 02098793 //bid details2 / 81

Central Government/Public Sector

CTN :42970120

08 Dec, 2025 NA

Belgaum - Karnataka

Tender For supply of 1251210326 compact cylinder dmml 32 30 p a 1 , 1251210151 pneumatic polyurethane tubing pun 10 1 , 1251210151 pneumatic polyurethane tubing pun 10 2 , 1251210149 pneumatic polyurethane tubing pun 6 1 , 1251210149 pneumatic polyurethane tubing pun 6 2

Central Government/Public Sector

CTN :42954672

08 Dec, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of pneumatic power cylinder with smart positioner for mirzapur raigarh and mahan d d - l184619759902001 cold air damper actuator a h 08 x 08 m1 , l184619759902002 hot air damper actuator a h 08 x 16 m1 , l184619759902003 linkage rod for cad control m1 , l184619759902004 linkage rod for had control m1 , l184619759902001 cold air damper actuator a h 08 x 08 m2 , l184619759902002 hot air damper actuator a h 08 x 16 m2 , l184619759902003 linkage rod for cad control m2 , l184619759902004 linkage rod for had control m2 , l1846s9759901001 complete set of power cylinder 08 x 08 trichy , l1846s9759901002 complete set of power cylinder 08 x 16 trichy , l1846s9759901003 seal kits o rings gaskets 08 x 08 trichy , l1846s9759901004 seal kits o rings gaskets 08 x 16 trichy , l1846s9759901005 pneumatic air filter regulator trichy , l1846s9759901006 smart positioner with position f b txt trichy , l184219759901001 cold air damper actuator a h 08 x 08 r1 , l184219759901002 hot air damper actuator a h 08 x 16 r1 , l184219759901003 linkage rod for cad control r1 , l184219759901004 linkage rod for had control r1 , l184219759901001 cold air damper actuator a h 08 x 08 r2 , l184219759901002 hot air damper actuator a h 08 x 16 r2 , l184219759901003 linkage rod for cad control r2 , l184219759901004 linkage rod for had control r2 , l1842s9759901001 complete set of power cylinder 08 x 08 trichy , l1842s9759901002 complete set of power cylinder 08 x 16 trichy , l1842s9759901003 seal kits o rings gaskets 08 x 08 trichy , l1842s9759901004 seal kits o rings gaskets 08 x 16 trichy , l1842s9759901005 pneumatic air filter regulator trichy , l1842s9759901006 smart positioner with position f b txt trichy , l185419759902001 cold air damper actuator a h 08 x 08 m3 , l185419759902002 hot air damper actuator a h 08 x 16 m3 , l185419759902003 linkage rod for cad control m3 , l185419759902004 linkage rod for had control m3 , l185419759902001 cold air damper actuator a h 08 x 08 m , l185419759902002 hot air damper actuator a h 08 x 16 m , l185419759902003 linkage rod for cad control m , l185419759902004 linkage rod for had control m , l1854s9759901001 complete set of power cylinder 08 x 08 trichy , l1854s9759901002 complete set of power cylinder 08 x 16 trichy , l1854s9759901003 seal kits o rings gaskets 08 x 08 trichy , l1854s9759901004 seal kits o rings gaskets 08 x 16 trichy , l1854s9759901005 pneumatic air filter regulator trichy , l1854s9759901006 smart positioner with position f b txt trichy

State Government

CTN :42722408

04 Dec, 2025 4.17 Lacs

Jharsuguda - Odisha

Tender For corrigendum : supply of air operated pneumatic power cylinder (q3)

CTN :42901044

16 Dec, 2025 NA

Tarapur - Maharashtra

Tender For supply of spares for kirloslar pneumatic co ltd make reciprocating air compressor model 2ha 2qt - reciprocating air compressor bearing bush main part no. 35. 110. 120. 00 1. , bearing part no. 35. 110. 100. 00. , cylinder part no. 35. 180. 270. 00. , plate intermediate for 210d cylinder part no. 35. 336. 250. 00. , plate valve for 134crs31 32 suction deliveru valve part no. 36. 272. 520. 00. , spring helical conical for 134crs 31 suction valve part no. 36. 320. 240. 00. , spring helical conical for 134crs 32 delivery valve lt part no. 36. 320. 260. 00 , bell for mounting 134cr and 134crs suction valve part no. 36. 112. 120. 00. , grill protection for suction valve part no. 49. 141. 010. 00. , ring o 172dx6d for intercooler part no. 24. 541. 720. 00. , plate for r105 suction and delivery valve part no. 49. 239. 060. 00. , bell 85 height for delivery valve 210d and 230d part no. 35. 112. 300. 00 , s-a valve part no. 35. 050. 260. 00. , stud m 16 x 2 - 45 35 cylinder mtg. part no. 22. 229. 280. 00. , nut hex plain m16x2 cylinder mtg. part no. 22. 072. 270. 00. , nut m 12x1. 5 part no. 22. 072. 200. 00. , stud m 12x1. 5----27 18 part no. 22. 228. 560. 00. ) /bid number: gem/2025/b/6860157 * /dated: 24-11-2025 & & / bid document1 / 19

CTN :40437644

13 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - flow meter 510, needle valve 502, pressure relief valve 504, filter element 5 absolute, air pressure regulator 527, pressure reducer valve 503, air pressure gauge 531, pressure gauge 517, pressure gauge 516, pressure gauge 539, pressure gauge 532, pressure gauge 537, pneumatic control valve, auto/manual switch, pneumatic controller, fuel disconnect, filter, module, o-ring, relay, diode, face-seal mating, relay, iso chain, l=61.25 (102 pitches), washer, shoulder ring, screw cap, setscrew (opt to item 90), bushing teflon, seal and retainer s/a, retainer-seal and bearing, washer thrust, seal, plain encased, washer (order nha item 6), rail, washer, flat, screw, screw, cap, socket head, .1380-32 thd x .750 lg, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, subassy, switch (s3) attaching parts, box assembly, connector circ. mount, switch subassy (s4) attaching parts, cylinder, piston, end cap, oil, end cap, air, end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydra ulic flow regulator, label, cap-port s/a, plate cam, name plate, name plate, sleeve, cover, body, shaft, splined, body, assembly, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel-cylinder, mounting flange s/a, pin-cam index, front housing s/a, shaft and bearing s/a, collar-hold down, shaft- internal drive, bushing- spline, spring-helical compression, plate- hold down, spacer, bushing, cup (order nha item-6), actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, gasket, terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), box assy, box assembly, worm, machined, module, connector attaching parts, receptacle, it is a sub-assembly of light control box, switch, micro, relay,2 pdt,type i attaching parts, pin, straight, 0937 dia attaching parts, relay, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), spool and piston subassembly, spool; compensator(matched set order nha item-290), piston, stroking, piston, rate, barrel cylinder, piston, blocking 9matched set order nha), port cap, bearing, cylinder barrel, elbow, flange- mounting, packing, perfor med

CTN :42895265

03 Dec, 2025 NA

Tinsukia - Assam

Tender For supply of mt 40 e e - clutch master cyl , rear brake shoe , fog light 12v , valve brake pneumatic , battery cable , tank coolant vehicular , wheel cylinder 44. 45mm dia , assy wheel cylinder , battery cut off switch , door lock assy rh , filter cum water seprator , light assy indicator , assy head lamp lh , bush king pin , assy clutch master cylinder , assy combination switch , field coil assy , suspension bush repair kit , elect temp gauge , spring assy rear , ignition coil , timing belt

Oil Cylinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government