Latest oil dipstick Tenders | Government oil dipstick Tenders

Central Government/Public Sector

CTN :45733150

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45737809

10 Jul, 2026 NA

Darjeeling - West Bengal

Tender For supply of hose , 352 dia clutch disc assy 1 75 spline , switch box 9502 , oil dipstick , mounting engine front , brakeshoe assy front , unit assy head light , assy rear view mirror outer rh , tempe transducer , push button switch

CTN :45711096

03 Jul, 2026 NA

Parganas - West Bengal

Tender For spare parts of scania - hose part no 283136, dust cover part no 190335, seal ring part no 214309, seal ring part no 164900, hose part no 811195, hose part no 188283, control part no 1104198, dash board lock part no nk, head light assy part no 389483, cover part no 310518, plate scania part no 352140, rear toe lock part no nk, lmg bracket part no nk, screw m8x16 part no 808293, oil dipstick (eng ) part no 271225, intermediate part part no 219516, filler tube part no 257754, drain cock (tap) part no 228491, hollow screw part no 17146, hollow screw part no 17384, fuel tank part no 292781, hollow union part no 377424, lock ring part no 804787, piston ring part no 244186, plug part no 244465, plug part no 129386, drive part no 389606/389672, piston part no 367124, disk, outer part no 194428, disc, inner part no 194429, lock ring part no 804793, switch part no 328655, cover part no 317203, intermediate piece part no 254757, regul. valve, front part no 390485, regul. valve, rear part no 390487, elbow connection part no 161901, temperature monitor part no 334383, shim 0, 5 mm part no 274416, drain tube part no 224266, solenoid valve part no 1115802(350127), elbow connector part no 208405, reducing nipple part no 244439, sensor(speed) part no 284154, oil cooler part no 391173, connector part no 275052, journal part no 264043, lubricator part no 806311, three-way nipple part no 248351

Central Government/Public Sector

CTN :45702009

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45647222

30 Jun, 2026 7.00 Lacs

Sonipat - Haryana

Tender For purchase of tube cleaning equipments of ffes evaporators and pan etc. - purchase of tube cleaning equipment s of ffe s evaporators and pan etc., flexible shaft 16 mtr for ffe(make s.j industries, manacles, scaleaway, power flex)2965, foundry brush(make s.j industries, manacles, scaleaway, power flex)1980, hand piece flex shaft19mm (make s.j industries, manacles, scaleaway, power flex)5205, shaft flexible 7.5 mtr long (length of one no. shaft 7.5 mtr) (make s.j industries, manacles, scaleaway, power flex)1890, sphere beeds 42 mm (make s.j industries, manacles, scaleaway, power flex)1896, sphere pin 42 mm(make s.j industries, manacles, scaleaway, power flex)1897, spring 42 mm(make s.j industries, manacles, scaleaway, power flex)1898, t.h.cutter35.6mm for ffe(make s.j industries, manacles, scaleaway, power flex)5206, tool head cutter 42mm(make s.j industries, manacles, scaleaway, power flex)1892, tool head cutter 98mm (make s.j industries, manacles, scaleaway, power flex)1895, turck head brush 35.6mm for ffe(make s.j industrier, manacles, scaleaway, po wer flex)5209, turk head brush 42/43mm (make s.j industries, manacles, scaleaway, power flex)1971, turk head brush 98/102mm (make s.j industries, manacles, scaleaway, power flex)1974, evaporator tube expender suitable for id 42.6 mm(manacles, scaleaway, power flex make)1463, ffe tube expender suitable for id 35.6 mm(make s.j industries, manacles, scaleaway, power flex)1525

CTN :45630687

26 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of spare parts of scania - , gasket part no 387237(274262), sensor(speed) part no 284154, piston 010 part no 1103237, ring set od 0, 010" part no 319751, valve part no 161078, o ring 9, 1 x 1, 6 part no 390547, disk outer part no 315346, drain cock part no 228491, valve part no 1103259, hydraulic pump part no 361453, solenoid valve part no 1115802(350127), filter part no 141721, seal ring part no 254635, disk inner part no 387798(1102539), control part no 220989, oil dipstick (gear box) part no 272425, stop control part no 6895000736(275118), hand brake part no 191883

CTN :45484549

26 Jun, 2026 1.10 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : supply of clutch and pressure plate , clutch release bearing , pilot bearing , water pump , oil pump , oil dipstick with pipe , oil filter , fuel water separator , glow plug , turbocharger assy , thrust washer std

Central Government/Public Sector

CTN :45591733

25 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubbles including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubbles, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubbles by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

Central Government And Public Sector

CTN :45591734

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: back side of 132 kva electric tower no. 02, north-south 42 feet along 20 feet kacchi road and east-west 52 feet.

Central Government And Public Sector

CTN :45591735

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: in front of oxygen plant 32 feet east-west along pcc road and north-south 80 feet.

Oil Dipstick Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector