Latest oil gun scrap Tenders | Government oil gun scrap Tenders

State Government

CTN :45167421

20 Jun, 2026 110.30 Crore

Bagalkot - Karnataka

Tender For corrigendum : survey, investigation, preparation of design & drawings, installation, testing and commissioning of lift irrigation scheme consisting intake canal, jackwell cum pump house, pumping machinery, rising main, bleeders and manifolds, pipe distribution network with ms/hdpe/o-pvc pipes including structures all along the pipe distribution network for providing irrigation facility to 1765.0 ha of left out area in jamakhandi and mudhol taluks, bagalkot district including filling up of 7 no mi/zp tanks by lifting water from krishna river under mareguddi lift irrigation scheme and filling of galagali barrage by lifting water from downstream to upstream from krishna river including supply of spares, accessories and tools including operation and maintenance of the entire system for five years from the date of successful commissioning of the entire system on turnkey basis

Central Government And Public Sector

CTN :45529708

03 Jul, 2026 NA

Kaiga - Karnataka

Tender For providing of custom bid for services - preventive maintenance and load testing of cranes, hoists, chain pulley blocks and other material handling lifting tools and tackles in kgs 3&4

Central Government/Public Sector

CTN :45537087

22 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For providing of custom bid for services - lifting of 50 tonnes precasted rail weighbridge structure approx 8m x 3m and positioning,fitting at ballarpur railway siding including crane manpower tools tackles

Central Government And Public Sector

CTN :45486950

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacturing, supply, erection, testing and commissioning of 5 ton eot crane with remote for demounting bay of assembly shop as per rwf technical specification no.rwf/m/m&p/2025-26/5-2 t eotc d/m bay enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 ofspecification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated as concomitant accessory. ]

Central Government/Public Sector

CTN :45178202

16 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

Central Government/Public Sector

CTN :45197749

16 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology - secondary master reference - pt 2 d , secondary master impeller stage-1 , laby.root measure tool , inspection tool , inspection tool , inspection tool , high frequency pin + equipment , handling box , tightening pedastal , pin , dn12 pipe , multi purpose flange blank , exp extractor , support connectors , blanking plate , immobilizer , blanking cover , flat seal , test fixture , assembly tool , raising device , support of assembly , support , tool circlip fitting , errection support , removal tool , handling tool , immobilizer pin , adaptation link , assembly fitting , balancing tool , milling fixture , rectification tool , flow check tool , fr plr assy tool , base casting , sleeve fitting tool , marking block , inspection fixture , errection tool , seal assembly cone , rotating plate , hydraulic pressure generating tool , variseal setting , measuring tool , measuring tool , measuring tool , assembly spacer , extractor , seal setting tool , test adaptation , test tool (for tm0073g001) , support tool (for tm0073g001) , special tightening tip , checking tool , control tool , control tool , ring removal/installation , assembly tap cylinder , test interference , grinding fixture for pt1 blade , grinding fixture pt stg 2 , plate cutting tool , handling tool , segment clue tool , handling tool , set of guides , det 2 of tm2689 g101 , lifting tool , engine support mount , setting & removal tool , balancing tool , blank , withdrawal tool , rear bearing seal removal tool , errection support , errection support , orientation tool , adaptation without target , adaptation with target , sheath , sheath , protector , removal tool , assembly support , fuel leak drain check tool , wrench & immobilizer , erection support , handling tool , adaptor fitting , adaptor fitting , wedge height , extractor , air intake cover , shuttle box , key , flow check tool , erosion / impact check tool , erosion / impact check tool , graduating rule , boroscope positioning support kit

CTN :45340595

13 Jun, 2026 6.93 Lacs

Murshidabad - West Bengal

Tender For corrigendum : service contract for statutory load testing and certification of lifting tools tackles lifts hoists eot cranes and pressure vessels etc of various capacities at phi 2x 300mw ph ii 2 x500 mw and phiii 01x 660mw units at sgtpp wbpdcl

CTN :45469583

16 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - ---- custom bid for services - revalidation of fall arrestor at hpcl kanpur terminal- annual maintenance and revalidation of fall protection system installed at tlf gantry (16 lines), calibration shed (1 line), sealing tower (4 lines), ethanol u/l gantry (2 lines) and tw gantry, spur 1 (14 sections of 50 mtr each and tw gantry, spur 2 (14 sections of 50 mtr each). i. conduct a thorough inspection of the existing fall arrestor system and lifeline. ii. assess the current condition of all components, including harnesses, lanyards, anchors, and connectors. iii. identify any wear, damage, or defects that could compromise safety. iv. ensure the system complies with the latest safety standards and regulations (e.g., osha, ansi). v. verify that all components meet manufacturer specifications and industry requirements. vi. perform load testing on the lifeline and anchor points to verify their strength and reliability. vii. conduct a drop test to ensure the fall arrestor system functions correctly. viii. provide certification of revalidation, including test results and compliance documentation. ix. carry out necessary maintenance, such as lubrication of moving parts and tightening of loose components. x. repair or replace any damaged or worn parts to restore the system to optimal working condition. xi. document all repairs and replacements made during the revalidation process. xii. recommend and implement any necessary upgrades to enhance the safety and performance of the system. xiii. install additional safety features if required, such as shock absorbers or retractable lifelines. xiv. prepare a detailed report of the revalidation process, including inspection findings, test results, and maintenance performed. xv. maintain records of all certifications and compliance documents for future reference. xvi. schedule follow-up inspections to ensure continued compliance and safety. xvii. offer ongoing technical support and assistance as needed. xviii. lifting tools & tackles: vendor should get revalidation certification through a up factory competent person and submit all required documents to hpcl.

Central Government And Public Sector

CTN :45438741

12 Jun, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacture, supply, erection, testing and commissioning of 5 ton eot crane for extension of wheelset stacking area of assembly as per rwf technical specification no.rwf/m&p/assy/2025/5 t eot crane enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 of specification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated asconcomitant accessory. ]

Central Government/Public Sector

CTN :45446527

12 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For biennial load testing contract of all tp equipment (lifting tools tackles lifts) of rls chp

Oil Gun Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors