Latest oil lubricant Tenders | Government oil lubricant Tenders

CTN :40728636

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For supply of ms shs fabricated steel structure 18 nos containers including staircase and water tank staging minimum weight , 0 point 50 mm trapezoidal ppgi az 150 550 mpa sheet having green camouflage pattern size 3500 mm x 1070 mm weight approx 16 point 70 kgs per sheet , 0 point 50 mm ridge cover of size 250 plus 250mm 500 mm 3000 mm length camouflage pattern , shelter flashing 0 point 50 mm properly rivetted in floor wall ceiling internal external corners including outside joint as per tech specs , 60 mm thick wall and partition panels fixed with the shelters , 60 mm thick false ceiling panels fixed with the shelters , 60 mm floor panels fixed with the shelter , 3 mm thick spc stone plastic composite waterproof flooring fixed on floor panel in all areas except toilet block , aluminium chequered sheet 1 point 5mm thickness fixed on floor panel only in toilet block areas except bathing and toilet area , doors 900 x 2135 mm internal panel made from 60 mm thick puf panels having aluminium lipping all around outer frame to be made with 2 mm thick ms painted profile , toilet doors 700 x 2000 mm internal panel made from 30 mm thick solid pvc panel outer frame to be made with 2 mm thick ms painted profile , aluminium 2 track sliding double glass unit insulated windows 1000 x 1000 mm , window canopy with ppgi sheet and angle iron frame , aluminium top hung ventilator of size 450 mm x 600 mm , aluminium canopy with ppgi sheet and angle iron frame , aluminium fixed verandah glazing with toughened glass 5 mm thick of size 1200 mm x 2400 mm , foundation bolt 40 x 450 mm , m 25 x 100 mm ht nut bolt , stsd screws for roofing rivets for flashing nut bolts for canopy , ms steel lockers of size 2100 mm height x 900 mm width x 475 mm depth double door duly painted in approved shade , office chairs rotating type with puf cushion and rubber hand rest , steel office table of size 1200 mm length x 760 mm width x 900 mm height with 3 drawers 1 cupboard and 18 mm thick prelaminated board as per tech specs , fire extinguisher a b and f type 2 kgs , water dispenser 15 ltr capacity , waste dustbin 10 ltr , 2 kva off grid solar plant with solar pv module 12 volt 335 watts along with all wires junction box connectors gi frame for fixing of panels , 2 kva pure sine wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable as required , fd kero heater size 44 point 6 x 44 point 6 x 58 cm heating performance 6 point 3 kw fuel tank capacity 7 point 2 ltrs oil consumption min 0 point 24per max 0point 74 ltr per wt 12 kgs , drapery rods with brackets for curtain , all internal sanitary fitting hot cold water pipelines drainage up to the shelter will be fixed in supplier manufacturing unit external plumbing and sanitary items will be supplied with the shelter , vitreous wash down water closet pan with flushing system cistern combo with p or s trap and flushing pipe complete including all joints complete , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm make jayna bluestar diamond oblique amc or equivalent , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock with all accessories as per brief tech specs , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long and waste pipe , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along with all connections like ppr tee elbow socket reducer etc complete in all respects , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections like ppr tee elbow socket reducer etc complete in all respects , 25 mm ppr pipes pn 16 for ho

CTN :40710922

24 Jun, 2025 NA

Bathinda - Punjab

Tender For corrigendum : deployment of 01 no vehicle 4 seater capacity on monthly hire basis including driver with salary accommodation maintenance oil lubricant excluding diesel at 2g ethanol bio refinery project bathinda punjab

Central Government/Public Sector

CTN :40672183

03 Jul, 2025 NA

Durgapur - West Bengal

Tender For design, engineering, manufacture/ fabrication, assembly, shop testing/ inspection, painting, packing and delivery at site of valves _only part-g_ of attached technical specification along with requisite nos. of companion flanges, gaskets, bolts, nuts, washers, initial fill of oils, lubricants etc., required for up_gradation of blast furnace no. 3 at sail, durgapur steel plant.

State Government

CTN :40647327

30 Jun, 2025 32.35 Lacs

Delhi - Delhi

Tender For supply of ss hydraulic or feather lite hydraulic round chafing dish set gel fuel based with see through glass lid 6 to 7 litres capacity , brass lagan or handi shaped lift top chafing dish set gel fuel based regular or hammered finish 6 to 7 litres capacity , copper lagan or handi shaped lift top chafing dish set gel fuel based regular or hammered finish 6 to 7 litres capacity , ss hydraulic or feather lite hydraulic square chafing dish set gel fuel based with see through glass lid 6 to 7 litres capacity , ss hydraulic or feather lite hydraulic square chafing dish set induction based with see through glass lid 6 to 7 litres capacity , additional anti jam half moon shape ss food grade food pan size befitting item sr no 01 and 02 and 03 , additional anti jam rectangle shape ss gn food pan size befitting item sr no 04 and no 05

CTN :40591634

23 Jun, 2025 4.85 Crore

Chandigarh - Chandigarh

Tender For purchase of oil, lubricants, radiator coolants and grease

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

Oil Lubricant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government