Latest oil mill Tenders | Government oil mill Tenders

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

State Government

CTN :42164968

11 Dec, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : supply of various size and types of conveyor belt carrying, impact & return rollers for chp & lhp at gtps, utps, stps, kltps, bltps, wtps and wtps-8 through annual rate contract order basis - carrying roller 114.3x200 mm for mrc 3,4,5, impact roller 165x200 mm,for mill reject conveyor :3,4and5, return roller 114.3x600 mm for mrc 3,4,5, carrying roller 139.7x315 mm for con.5,6,7,8,10 ab, impact roller 165x335 mm for con. 5,6,8,10 ab, return roller 114.3x950 mm,for 800 mm belt, carrying rollar 139.7x380 mm for con.2ab, impact roller of size 165x405 mm long for conv.2ab, return roller 114.3x1150 mm for con.2ab, troughing roller 152.4x465 mm (carrying roller), impact roller 190x465 mm for 1200 mm belt, return roller 152.4x1400 mm, troughing roller 152.4x530 mm (carryingroller), impact roller 190x530 mm for 1400 mm belt, return roller 152.4x1600 mm, heavy duty return roller 152.4x1400 mm, carring and return roller114.3x2400 for dribble con, frame for carrying rollers (ti) size 114.3 mm dia.x200 mm length., t i roller stand for belt 800 mm, t i roller stand for belt 1000 mm, t i roller stand for belt 1200 mm, t i roller stand for belt 1400 mm, impact roller stand for belt 1200 mm, impact roller stand for belt 1400 mm, self alignment t i roller stand for 1000 mm conveyor belt, self alignment return roller stand for 1000mm conveyor belt, self alignment t i roller stand for 1200 mm conveyor belt, self alignment return roller stand for 1200 mm conveyor belt, self alignment return roller stand for 1400 mm conveyor belt., self alignment t i roller stand for 1400 mm conveyor belt., ims belt -1 to 6 drive pulley size 660mm x 1250mm x 55mm, ims belt -1 to 6 end pulley size 660mm x 1250mm x 55mm, head end non drive pulley shaft dia 140mm, bearing dia 125mm,pulley dia 500mm, length 1400 mm for conv 18 ab tripper trolley, tail pulley having size 400 dia. x 1400mm face width, shaft dia. 120 mm.(bearing dia. 100 mm) with rubber lagging and bearing block but without bearing. drg. no. ko 1999/4 m/c no. co /1141/18 ab-, bend pulley having size 400 dia x 1400 mm face width shaft dia. 140 mm (bearing dia 125 mm) with rubber lagging and bearing block but without bearing mc no co/1141/13, snub pulley 110 mm shaft dia, bearing dia 100 mm, pulley dia 500 mm length 1400 mm for conveyor 16 ab and 17 ab, tail pulley having size 500 dia. x 1600 mm face width, shaft dia. 130 mm.(bearing dia. 115 mm) with rubber lagging and bearing block but without bearing. m/c no. co /1141/11 ab, tail pulley having size 400 dia.x1600 mm face width, shaft dia. 110 mm.(bearing dia. 90 mm) with rubber lagging and bearing block but without bearing. m/cno.co/1141/26 ab (for belt feeder 1 and 2, gravity bend pulley 800x1150 mm,shaft dia-115 mm, garland type carrying roller set of three nos. fitted with clamp, garland type return roller set of two nos. fitted with clamp, heavy duty return roller 152.4x1600 mm

Central Government/Public Sector

CTN :42933650

05 Dec, 2025 NA

Solapur - Maharashtra

Tender For corrigendum : procurement of mill hydraulic roller position feedback sensors for ntpcsolapur

Central Government/Public Sector

CTN :42989339

08 Dec, 2025 19.89 Lacs

Visakhapatnam - Andhra Pradesh

Tender For regular maintenance and overhauling of bowl mills of tpp boilers --, servicing of gearbox as per sl.no.1.01.01 το 1.01.04 of scope of work, servicing of worm shaft as per 1.02.01 of scope of work, replacement/reversal of worm wheel & worm shaft as per sl.no.1.04.01 of sow, repair of mechanical face seal as per 1.05.01 of scope of work, repair of skirt & scrapper as per 1.06.01 of scope of work, repair of roller assemblies as per 1.07.01 of scope of work, replacement of journal as assemblies as per 1.08.01 of scope of work, replacement of bull ring segment as per sl.no 1.09.01 of scope of work, repair of mill discharge valve as per sl.no.1.10.01 of scope of work, repair of classifier as per 1.11.01of scope of work, repair/replacement of vane wheel segment as per 1.12.01 of scope of work, repair of reject hoppers and discharge gates as per scope of work 1.13.01, repair of pf bends as per 1.14.01 of scope of work, repair of p.f.pipelines, bends etc.by welding as per 1.15.01 of scope of work, replacement of victualic coupling as per 1.16.01 of scope of work, multiport outlets repair as per sl.no.1.17.1 of scope of work, repair of orifice plates as per sl.no.1.18.01 of scope of work, bowl mill area cleaning as per scope of work sl.no.1.20.01, replacement of upper radial bearing and associated works of bowl mill as per scope of work 1.23.01 το 1.23.21, replacement of ventury assembly as per scope of work 1.24.00, replacement of feed pipe as per scope of work 1.25.00, servicing of mill reject conveyors idlers as per scope of work s.no 2.01.01 το 2.01.08, servicing of mill reject conveyors return idlers as per scope of work s.no 2.02.01 το 2.02.08, replacement of inner cone as per sow s. no 5.01.00, hard facing of bowl extension ring, vane wheel segment and separator body as per sow s. no 5.02.00, servicing of pyrite hopper power cylinder as per sow s. no 5.03.00, servicing of lube oil system as per sow s. no 5.04.00, servicing of volumetric feeder as per sow s. no 6.01.00, servicing of eddy current drive gear box as per sow s. no 6.02.00, general maintenance of boiler-6 bowl mills & lube oil system, roller setting of boiler-6 bowl mill, replacement of venturi collar of boiler-6 bowl mills, replacement/resetting of gasket of victaulic coupling or feed pipe sleeve coupling (per coupling) of boiler-6 bowl mills, servicing, replacement and setting of classifier deflector blade mechanism (per mill) of boiler-6 bowl mills, replacement & servicing of journal spring assembly (per assembly) of boiler-6 bowl mills, checking & setting of spring compression (per mill) of boiler-6 bowl mills, replacement of journal assembly (per assembly) of boiler-6 bowl mills, servicing of journal assembly with journal head liner assy (per assembly) of boiler-6 bowl mills, replacement of grinding roll and its support bracket or replacement of dirty oil from journal assy of boiler-6 bowl mills, replacement of vane wheel segment assembly/air inlet arrangement (per mill) of boiler-6 bowl mills., replacement of gear or bibby coupling half of boiler-6 bowl mills, alignment of mill & motor of boiler-6 bowl mills, servicing & replacement of lube oil pump of boiler-6 bowl mills, repl. of w.s. gland packing or replacement of cooling water hoses or pyrite hopper gate problem or alignment of lop or servicing of stuffing box de/nde of cad/had or servicing of any one valve of mill lube oil lines or mrhs air valve or air receiver tank drain tap or inspection of any one pf pipe hanger or, cleaning of any one hag or cag seat of boiler-6 bowl mills., general maintenance of gravimetric feeder of boiler-6, inspection/replacement of bearings of main tail pulley, intermediate rolls & main pulley of gravimetric feeder of boiler-6, replacement of feeder belt of gravimetric feeder of boiler-6, replacement of take up screw and screw housing of take up pulley assembly of gravimetric feeder of boiler-6, replacement of belt drive reducer of gravimetric feed

CTN :42995349

08 Dec, 2025 2.98 Lacs

Narsipatnam - Andhra Pradesh

Tender For laying of cc drain from abid center to sree lakshmi balaji oil mill, sai baba temple road in ward no.23 of narsipatnam municipality.(4th call)

CTN :42970300

12 Dec, 2025 13.66 Lacs

Multi City - Andhra Pradesh

Tender For disilting of wet silt from existing manholes, internal plastering of damaged manholes and raising of existing manholes at various locations of kallupakalu, prasad gardens, velampeta, medhar veedi, panda veedi, spring road, pandompulla sandu, oil mill street, rrmr road and purna market under ae-12 section in ward no.35, zone-4, gvmc.

CTN :42969387

09 Dec, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i - mill plant -unit ii â€“ attending the break down / preventive maintenance works such as overhauling of journal assemblies, spring compression assemblies, hard facing of clamping ring, bowl hub cover, strengthening & welding of journal header guard support bracket assembly, removing & re fixing the bull ring segment, grinding rollers, and ring roller clearance setting etc., for a period of 365 days from the date of commencement of work.

CTN :42969388

09 Dec, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i - mill plant -unit iv â€“ attending the break down / preventive maintenance works such as overhauling of journal assemblies, spring compression assemblies, hard facing of clamping ring, bowl hub cover, strengthening & welding of journal header guard support bracket assembly, removing & re fixing the bull ring segment, grinding rollers, and ring roller clearance setting etc., for a period of 365 days from the date of commencement of work.

CTN :42969390

09 Dec, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i - mill plant -unit i â€“ attending the break down / preventive maintenance works such as overhauling of journal assemblies, spring compression assemblies, hard facing of clamping ring, bowl hub cover, strengthening & welding of journal header guard support bracket assembly, removing & re fixing the bull ring segment, grinding rollers, and ring roller clearance setting etc., for a period of 365 days from the date of commencement of work.

Oil Mill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector